Coater Resume
Summary : Seeking a server Coater position with a company which will require to utilize skills, abilities, and experience in the work field.
Skills : Raw Materials, Coater Machine, Organizing.
Description :
- Learned and remembered steps to several floor coating systems.
- Ran grinder with Vac system, both hand-held and walk-behind.
- Ran a chipping hammer, Smooth, spread, or trowel floor coating materials.
- Followed PPE requirements for different chemicals.
- Masked off areas intended to remain clean with tape and plastic.
- Ran squeegees or rollers, Coated steel pipe with a Rustoleum solution.
- Mixed, carried, or clean all components necessary to complete the job.
Experience
7-10 Years
Level
Management
Education
Diploma
Coater Resume
Summary : Responsible for applying coating (powder coating or spray paint) to castings on a regular basis. Operate hoist equipment for parts over 30 pounds.
Skills : Cash Handling, Customer service, Management.
Description :
- Prepared surfaces by removing rust, paint, and loose particles.
- Sanded and even out dents and scars. Got hired in from the temp agency.
- Assured a smooth and level surface using sanders, scrapers, sandpaper, wire brushes.
- Ensured that match, texture, and appearance meet finish requirements.
- Cleaned and maintained painting equipment.
- Performed other duties as assigned.
- Racked and un-racking the product but eventually made it to a coater and received a raise.
Experience
7-10 Years
Level
Management
Education
Diploma in Arts
Coater Resume
Headline : Organized, independent worker with strong time-management skills and great people skills. A coating technician selects, mixes and then applies paints or chemicals to various surfaces, such as a vehicle or other machine.
Skills : Customer Service, Food Safety, Sales Management.
Description :
- Designed to protect the surface of a printed circuit board.
- Applied onto the circuit board or the substrate.
- Acted as a protective coating from harsh elements.
- Finished a product containing the printed circuit board would be exposed to a harsh environment.
- Moistured or any environment that could damage the mechanics of a printed circuit.
- Brushed Coating application is commonly used with a low volume production run.
- Processed it is important to keep the brush loaded with coating and let it flow.
Experience
5-7 Years
Level
Executive
Education
Diploma in Arts
Coater Resume
Objective : Organized, independent worker with strong time-management skills and great people skills. They use different application devices, like a spray gun, to perform their duties.
Skills : Customer Service, Food Safety, Sales Management.
Description :
- Worked with production machinery and hand tools.
- Set up and checking products to confirm if they meet specifications.
- Worked with sanders, spray coaters, tooling equipment, or fabrication equipment on various products.
- Able to work well autonomously and within a team in a fast-paced and deadline-oriented environment.
- Self-motivated with critical attention to detail, deadlines, and reporting.
- Possessed a mechanical aptitude.
- Able to use a large variety of hand tools and basic knowledge of power tools, forklifts.
- Able to work overtime as necessary.
Experience
2-5 Years
Level
Junior
Education
General Studies
Coater Resume
Headline : To gain employment in a professional atmosphere where can enhance skills along with a high degree of enthusiasm and strong motivation.
Skills : Excel, Vision, Customer Service, Inventory Management.
Description :
- Coated all kinds of fittings and decorative parts for cars, homes, etc.
- Piped coating done as well.
- Moved materials off racks and prepared for shipment or delivery.
- Sorted material according to size, type, style, color, or product code.
- Maintained records of all activities and processes pertaining to the warehouse.
- Used of spray guns and power tools coater uses.
- Checked for any lines or defects in the rubber.
Experience
5-7 Years
Level
Executive
Education
Diploma in Arts
Coater Resume
Headline : To tends a machine that coats a continuous sheet of plastic material with synthetic resin solutions to impart special properties, such as heat resistance, impact strength, or waterproofing.
Skills : Quality Standards, Quality Checks, Raw Materials.
Description :
- Assured safety standards are used at all times and comply with all OSHA and L&I regulations.
- Followed all work instructions SOI's.
- Responsible for productivity and quality for the assigned production process.
- Maintained orderliness and cleanliness of assigned work areas.
- Complied with established company policies and procedures.
- Assumed other duties as assigned.
- Set controls to regulate the speed of material feed and the amount of coating solution.
Experience
5-7 Years
Level
Executive
Education
Diploma in Arts
Coater Resume
Headline : As a Coater over 5 years responsible for adjusting the speed of unwinding and windup rolls. Turns valves to regulate steam or turn on infrared lamps to control drier temperature and moisture.
Skills : Machine Operation, Product Quality, Daily Operations.
Description :
- Operated and monitor automatic and semi-automatic machines used in the coating process.
- Set-up, calibration, and maintenance of equipment.
- Inspected materials, components, and production equipment according to established standards.
- Ensured product assemblies meet production and quality requirements
- Proficient in the use of required machinery/equipment.
- Performed routine assignments as directed.
- Learned to identify quality standards and apply to their own work product.
- Closely supervised with little latitude for independent judgment.
Experience
5-7 Years
Level
Executive
Education
Diploma in Arts
Coater Resume
Headline : As a Coater over 10 years of experience responsible for applying a layer or layers of paint or coating to a product to protect it from the elements and/or make it more aesthetically appealing. Prepares surfaces, cleans, product, and applies to coat.
Skills : Quality Standards, Troubleshoot, Data Entry.
Description :
- Read and follow instructions for operations procedures on various machinery and processes.
- Operated machines to feed, cut, form, punch holes, bend and mold metal stock.
- Recorded Statistical Process Control (SPC) on all materials when required.
- Visually inspected finished products and immediately notify the proper department or supervisor if problems arise.
- Packaged materials for shipping as needed assuring correct count, proper boxes, and labeling.
- Emptied metal wasted receptacle when required.
- Racked and Un-Racking various products from the assembly line (Plater or Powder Coater Lines).
Experience
5-7 Years
Level
Consultant
Education
Diploma in Arts
Coater Resume
Headline : To apply a Coater position were experienced in coatings such as paint, plastic, varnish, chocolate, or some other type of coating solution to various products, such as cars, toys, or electronics.
Skills : Set-Up, Quality Checks, Coater Machine.
Description :
- Ensured that the seed coating is applied in the correct amounts and that seed is fully coated.
- Mixed chemicals as needed using all required safety gear.
- Mixed chemicals for other dump stations as needed using all safety gear.
- Mixed Myco and Stimulate as needed. Keep accurate records of chemicals used.
- Verified paperwork is accurate before it is turned in.
- Conveyanced systems are fully clean.
- Changed between different types of seed.
Experience
5-7 Years
Level
Executive
Education
Diploma in Arts
Coater Resume
Headline : Coater position requires qualified candidates to be safety conscious and able to perform required functions in a productive manner, working with tight schedules and deadlines.
Skills : Safety Procedures, Batch Records, Raw Materials.
Description :
- Clearly marked bin sheets as to what seed is in each one.
- Double checked each holding bin before running seed into it and verify that it is ready for new seed.
- Verified that the seed is going to correct the bin.
- Tracked of dust bin weight for calculating waste and track dust control system bags.
- Worked closely with production/bagging lines.
- Ensured the seed is going to the correct line.
- Spot checked the penknife tanks in Small Package and Plant to ensure they have enough chemicals.
Experience
5-7 Years
Level
Executive
Education
Diploma in Arts