A Combination of Pipe Welder takes responsibility for using a variety of welding techniques and tools to weld various pipes and components into flat, vertical, or overhead positions. Typical roles and responsibilities that are seen on the Combination Pipe Welder Resume are – observing and recognizing problems during the welding process; adjusting speed, voltage, amperage and feed of the rod; operating forklifts and overhead cranes; operating vertical and horizontal band saws; maintaining safe and clean work environment; and performing code-compliant welds using GMAW, GTAW, FCAW, and SMAW processes.
To ensure success in this field, the following skills are required – the ability to read, and interpret prints and plans; the ability to observe and recognize problems; knowledge of adhering to all safety rules and regulations; strong work ethics; the ability to meet high-quality standards; and knowledge of OSHA guidelines and safe work practices. A diploma is commonly seen on resumes.
Objective : A Combination Pipe Welder with over 2 years of experience in this field. Responsible for completing each weld to the specified standards using appropriate equipment and materials. Able to meet all physical demands and pre-employment conditions.
Skills : TIG, MIG, Hand Tools, Ensure Conformance.
Description :
Laid out, positioned, aligned, and fit components together.
Mitered and fabricated all different kinds of pipes.
Bolt, clamped, and tack-welded parts to secure in position for welding.
Repaired products by dismantling, straightening, reshaping, and reassembled parts using cutting torch, straightening press, and hand tools.
Used a variety of arc and gas welding equipment.
Read and understood plans and specifications, including isometric and orthographic drawings.
Visualized two-dimensional drawings in three dimensions.
Followed established job-site safety regulations and maintain a safe and clean work area.
Experience
0-2 Years
Level
Entry Level
Education
Certificate In Welding
Combination Pipe Welder Resume
Headline : Seeking a Combination Pipe Welder position. To be able to advance through the application of hard work and smart thinking. To ultimately advance to a prestigious management position with your company using these and other good work ethics.
Skills : Critical Thinking, Quality Control Analysis, Systems Analysis.
Description :
Selected type and size of pipe or other related materials and equipment according to specifications.
Bolted, clamped, and welded together metal components of products such as piping systems.
Tacked weld assemblies together.
Connected the cable from the welding unit to obtain amperage, voltage, slope, and pulse as specified by procedure or supervisor.
Obtained a specified electrode and inserted an electrode into a portable holder or threads consumable electrode wire through a portable welding gun.
Started power supply to produce an electric current.
Strucked arc which generates heat to melt and deposited metal from electrode to workpiece and join edges of the workpiece.
Experience
5-7 Years
Level
Executive
Education
G.E.D In General
Combination Pipe Welder Resume
Objective : Combination Pipe Welder with three years of experience leading sub-contractors and laborers on large scale industrial and commercial projects. Adept at finding engaging ways to motivate construction teams to exceed expectations and maintain the highest standards.
Skills : Detail-Oriented, Structural Welding, Utilizing SMAW and TIG Processes.
Description :
Removed rust and rough spots from work pieces with portable grinders and needle scalers.
Assembled and secured pipes, tubes, fittings, and related equipment, according to specifications, by welding, brazing, cementing, soldering, and threading joints.
Followed all policies and procedures as established by the company.
Followed the direction and instruction of the management team.
Observed safety and security procedures; reports potentially unsafe conditions and uses equipment and materials properly.
Ensured attendance and punctuality by being at work on time and ensures responsibilities are covered when absent.
Identified safety hazards that you or other employees may be subject to and take all necessary corrective action to eliminate or minimize hazards.
Experience
0-2 Years
Level
Entry Level
Education
GED In Education
Combination Pipe Welder Resume
Objective : Seeking the challenging and exciting Combination Pipe Welder position of the welder with an industry leader that will give me the opportunity to grow and maybe become their go-to guy in times of need.
Skills : Fitting And Welding, Tig Welding, Stick Welding.
Description :
Reviewed layouts, blueprints, diagrams, or work orders in preparation for welding or cutting metal components valve installation and rotating equipment.
Cut, threaded, and hammered pipe to specifications, using tools such as saws, cutting torches, and pipe threaders and benders.
Attached pipes to walls, structures, and fixtures, such as radiators or tanks, using brackets, clamps, tools, or welding equipment.
Inspected, examined, and tested installed systems and pipelines, using pressure gauge, hydrostatic testing, observation, or other methods.
Measured and marked pipes for cutting and threading.
Laid out full-scale drawings of pipe systems, supports, and related equipment, following blueprints.
Planned pipe system layout, installation, and repair according to specifications.
Experience
0-2 Years
Level
Entry Level
Education
GED
Combination Pipe Welder Resume
Headline : As experienced pipe and structural welder proficient in tig and stick welding methods and worked in the refineries, chemical plants, and also in shops for the past 6 years. Able to read and interpret prints and plans
Selected equipment and planned layouts, assembly, and welding.
Applied knowledge of geometry, physical properties of metal machining, weld shrinkage, and welding techniques.
Layout, position, aligned, cut, assembled, and fit metal components together in various body positions and in various places.
Set up equipment and welded parts, using arc, gas-shielded arc, submerged arc, or arc gas welding equipment.
Welded metal materials to piping systems equipment using the appropriate welding procedure for the various equipment and metal types involved.
Identified all equipment for the job and process.
Identified all safety risks and requirements.
Experience
5-7 Years
Level
Executive
Education
Certification In Welding
Combination Pipe Welder Resume
Objective : Seeking a Combination Pipe Welder position in construction or production as a Welder or Pipe Fitter, Millwright, Fabricator, laborer where my welding skills and experience is used. Able to observe and recognize problems during the welding process in order to adjust speed, voltage, amperage, or feed of the rod.
Skills : Monitoring, Service Orientation, Systems Evaluation.
Description :
Tested and became certified as a 6G TIG and Stick Bend Test Welder.
Prepared pipe for welding by beveling pipe ends according to specifications using Angle Grinders.
Welded pipe according to mechanical specifications.
Took measurements of pipe and pipe support material and cut to correct dimensions using a cutting torch or portable band saw.
Installed pipe and bolted pipe flanges.
Operated Snorkel and Scissors Man Lifts. Fabricated spool pieces for refineries.
Utilized 70S-6 on carbon pipe ranging in sizes from 2, 3, 4, 6, 8, and 10 pipe.
Experience
0-2 Years
Level
Entry Level
Education
BS In Welding
Combination Pipe Welder Resume
Objective : Combination Pipe Welder, responsible for Working within precise limits or standards of accuracy. Experience in Making decisions based on measurable criteria. and also experience in Appling basic mathematics to solve problems, etc,. Basic understanding of pipe fitting/rigging.
Skills : Critical Thinking, TIG Processes, Communication Skills.
Description :
Clamped, tack-welded, heat-bent, ground and bolted materials to achieve the required configurations and positions.
Observed hydrostatic and dimension tolerance tests to evaluate conformance to specifications.
Operated hoists, cranes, and power tools to dismantle equipment to replace defective parts.
Interpreted verbal and written instructions from work orders and prints.
Welded-in flat, horizontal, vertical, and overhead positions.
Inspected welds and checked that critical measurements met specifications.
Checked the weakness of workpieces and measured workpieces with a straightedge or template to ensure the piece meets specifications.
Experience
0-2 Years
Level
Entry Level
Education
GED
Combination Pipe Welder Resume
Objective : As a Combination Pipe Welder to join metal parts, such as pipe or metal plates as specified by layout, blueprints, work orders, welding procedures, or oral instructions through the application of heat or electric arc-welding equipment.
Skills : Pipefitting And Welding, Troubleshooting, Mechanical Skills.
Description :
Used spot welding gun or hand, electric, or gas welding equipment to weld or tack-weld pieces together.
United pipes from torch to tanks of oxygen and fuel gas, and turns valves to release the mixture.
Reached expected temperature, size, and color of flame by burning torch and adjusting the flow of gas and air.
Preheated workpieces for the preparation of welding or curving, using a torch.
Filled holes or corrected mistakes in lead pieces, and makes bulges thin and curves in metal workpieces.
Climbed up ladders or works on scaffolds to take apart textures.
Gave signal to the crane operator to lift large workpieces.
Experience
2-5 Years
Level
Junior
Education
Associates In Process Technology
Combination Pipe Welder Resume
Headline : Over 5 years of experience as a Combination Pipe Welder responsible for lays out, assembles, installs, and maintains pipe systems, pipe supports, and related hydraulic and pneumatic equipment for steam, hot water, heating, cooling, lubricating, sprinkling, and industrial production and processing systems by performing the following duties.
Skills : Negotiation, Attention to Detail, Social Orientation.
Description :
Provided excellent customer service, answered questions in a cordial and professional manner.
Cut and beveled carbon steel and stainless for proper weld joint.
Cut and threaded pipe for thread joint connections.
Used saws and cutting torches to craft proper pipe specs
Secured piping and installed hanger systems.
Repaired and maintained pipe systems and components.
Resolved problems such as changing drawings, relocations, obstacle interference, etc.
Experience
5-7 Years
Level
Executive
Education
Pipe Welding
Combination Pipe Welder Resume
Objective : To perform skilled welding work in the fabrication and to repair precast concrete building components with arc-welding equipment. Seeking a Prime opportunity for a career with a rapidly growing local industrial construction company.
Creating an account is free and takes five seconds.
You'll get access to the PDF version of this resume template.
Choose an option.
Sign up with Google
Sign up with Facebook
Sign up with Linkedin
This helps us make sure you're human and prevents spammers from abusing our services.
By continuing, you agree to our Privacy Policy and Terms.
Unlock the Power of Over 10,000 Resume Samples.
Take your job search to the next level with our extensive collection of 10,000+ resume samples. Find inspiration for your own resume and gain a competitive edge in your job search.
Get Hired Faster with Resume Assistant.
Make your resume shine with our Resume Assistant. You'll receive a real-time score as you edit, helping you to optimize your skills, experience, and achievements for the role you want.
Get Noticed with Resume Templates that Beat the ATS.
Get past the resume screeners with ease using our optimized templates. Our professional designs are tailored to beat the ATS and help you land your dream job.
