Pipe Welder Resume Samples

It is the duty of the Pipe Welder to assemble, install and maintain the building pipeline systems. In all types of work environment, these welders are expected to execute the duties stated in the Pipe Welder Resume – constructing and repairing piping systems, installing and building pipe hangers, valves and supports; following safety regulations, wearing protective clothing and adhering to safety regulations, performing pre-welding preparations, examining finished welds, inspecting equipment, repairing holes and damages, and operating machinery and equipment such as forklifts and cranes.

Employers seek out applicants with prior work experience and the following skills – excellent troubleshooting skills, high level of physical strength to lift and move heavy items, mathematical skills to calculate dimensions and trim pipes with precision; and knowledge of using welding and metalworking tools. A high school diploma is a minimum requirement, as the job skills are learned with experience.

Pipe Welder Resume

Objective : I joined The United Association of Plumbers and Pipefitters in Shreveport, La in 1991. I completed an apprenticeship in pipe fitting and pipe welding. In 1994 I graduated as a Journeyman. I have worked in various construction fields throughout my career. I started out working in Auto Plants doing re-tools and new construction. I then moved into the paper mill maintenance and new construction. I started working oil refineries and chemical plants in 1998, eventually moving into the power industry doing new construction and maintenance on gas fired, coal burning and nuclear power plants.

Skills : Level ll Radiograph interpation, Dye penatrant inspection, Mag particle inspection.

Description :

    1. Performed pre-welding tasks such as clamping, cutting and assembly.
    2. Performed welding tasks per approved codes and specifications.
    3. Evaluated risks and took preventive action.
    4. Informed management of any hazardous work conditions.
    5. Analyzed orthographic and isometric drawings and specifications.
    6. Tacking pre welding on the ground helping pipe fitter installing pipe on the air.
    7. Installing supports and hangers to install pipe lines Water mains, Valves tacking supports.
    8. Able to endure long shifts in adverse and uncomfortable work environments and complete tasks.
Years of Experience
Experience
2-5 Years
Experience Level
Level
Junior
Education
Education
High School Diploma


Pipe Welder Resume

Objective : MIG welding specialist proficient in using torch, plasma, air sac, stick weld and forklifts. Capable of reading and interpreting blueprints, drawings and diagrams. Knowledgeable self-starter capable of operating heavy equipment, supervising large crews and maintaining proper safety standards. Welder with extensive knowledge of structural, mild and stainless steel. I am enthusiastic highly responsible and committed to exceeding expectations for each job.

Skills : weld certs hvac elect. & plumbing pipefitting.

Description :

    1. Set up equipment and welded parts according to welding chart specifications and type.
    2. Repaired and maintained heavy-duty and construction machinery.
    3. Responded to service calls quickly and professionally.
    4. Completed minor torch ups with MIG welders.
    5. Followed all safety guidelines, including proper machine guarding and lockout and tagout procedures.
    6. Application of electrode and gun along weld line to create precision pieces.
    7. Adjusted the weld machines to the correct settings prior to weld applications.
    8. Cleaned and degreased weld joints and workpieces efficiently.
Years of Experience
Experience
2-5 Years
Experience Level
Level
Junior
Education
Education
Diploma


Pipe Welder/Technician Resume

Objective : Combination welder seek employment where I can gain on the job experience and learn as much as possible. I am easy to teach and willing to work my way up from a pipefitter to a welder. Area of experience Structure weldeing, tig welding, pipe welding, pipe fitting, and. Welding hand and cutting tools.

Skills : TIG, stick, flux core, short arc, sub arc, stainkess.

Description :

    1. Check slopes for conformance to requirements, using levels or lasers.
    2. Cover pipes with earth or other materials.
    3. Connect pipe pieces and seal joints, using welding equipment, cement, or glue.
    4. Install or repair sanitary or stormwater sewer structures or pipe systems.
    5. Install or use instruments such as lasers, grade rods, or transit levels.
    6. Lay out pipe routes, following written instructions or blueprints and coordinating layouts with supervisors.
    7. Align and position pipes to prepare them for welding or sealing.
Years of Experience
Experience
0-2 Years
Experience Level
Level
Entry Level
Education
Education
Diploma

Pipe Welder/Forklift Operator Resume

Objective : Welding Foreman / Certified Welder, with extensive knowledge of MIG, stick weld, structural welding, crane operation and metal fabrication, reading and interpreting blueprints, drawings and diagrams, operating heavy equipment, supervising crews and maintaining proper safety standards. Sergeant with 17 years in the U.S. Army National Guard, with a successfully completed combat tour. Experience in team management, administrative accountability and supply management.

Skills : Welding, Pipefitting, Quality Control.

Description :

    1. Performed pipe fabrication, installation and fitting according to proper specifications.
    2. Identified and located required tools prior to starting each project.
    3. Inspected pipes and piping systems to assess their quality and condition.
    4. Hoisted loads using slings, chains, shackles, hooks, cables and other rigging equipment.
    5. Installed and replaced water heaters, drain pipes and water supply lines.
    6. Cut and beveled piping using cutting torches, saws and threading machines.
    7. Maintained tools and equipment to keep them in excellent working condition.
    8. Followed relevant codes, regulations and safety techniques.
Years of Experience
Experience
2-5 Years
Experience Level
Level
Executive
Education
Education
GED In Basic Leadership Course

Pipe Welder II Resume

Objective : MIG welding specialist proficient in using torch, plasma, air sac, stick weld and forklifts. Capable of reading and interpreting blueprints, drawings and diagrams. Knowledgeable self-starter capable of operating heavy equipment, supervising large crews and maintaining proper safety standards. Welder with extensive knowledge of structural, mild and stainless steel. I am enthusiastic highly responsible and committed to exceeding expectations for each job.

Skills : Journeyman Pipefitter/Welder,OSHA Certified,Microsoft Office and Excel Proficient.

Description :

    1. Set up equipment and welded parts according to welding chart specifications and type.
    2. Repaired and maintained heavy-duty and construction machinery.
    3. Responded to service calls quickly and professionally.
    4. Completed minor torch ups with MIG welders.
    5. Followed all safety guidelines, including proper machine guarding and lockout and tagout procedures.
    6. Application of electrode and gun along weld line to create precision pieces.
    7. Adjusted the weld machines to the correct settings prior to weld applications.
    8. Cleaned and degreased weld joints and workpieces efficiently.
Years of Experience
Experience
2-5 Years
Experience Level
Level
Junior
Education
Education
Diploma

Pipe Welder/Fitter Resume

Headline : Accomplished and energetic Pipe/Structure Welder with a solid history of achievement in power plan/shipyard welding. Motivated leader with strong organizational and prioritization abilities. Areas of expertise include sub-arc welding, SMAW, FCAW, 6GR, and 6G welding.

Skills : Read drawing s, Read Fabercation drawings operate forklift, 30yr experience in welding field tig mig an stick.

Description :

    1. Weld components in flat, vertical, or overhead positions Operate safety equipment and use safe working habits.
    2. Lay out, position, align, and secure parts and assemblies prior to assembly, using straight edges, combination squares, calipers, and rulers.
    3. Examine work pieces for defects and measure work pieces with straight edges or templates to ensure conformance with specifications.
    4. Recognize, set up, and operate hand and power tools common to welding trade, such as shielded metal arc and gars metal arc welding equipment.
    5. Clamp hold, tack-weld, heat bend, grind, or bolt component parts to obtain required configurations and positions for welding.
    6. Chip or grind off excess weld, slag, or spatter using hand scrapers or power chippers, portable grinders or arc-cutting equipment Mark or tag material with proper job number, piece marks, and other identifying marks as required.
    7. Prepare all material surfaces to be welded, ensuring that there is no loose or thick scale, slag, rust, moisture, grease, or other foreign matter.
Years of Experience
Experience
5-7 Years
Experience Level
Level
Consultant
Education
Education
BS

Pipe Welder/Operator Resume

Objective : Provide my employer with a responsible team member, producing excellent quality work with emphasis on safety. I value continuous improvement, personally and professionally, and will make a positive contribution to your company's success. WELDING CERTIFICATIONS American Welding Society D1.1 / B2.1 Shielded Metal Arc Welding 8-inch Pipe - 6G Gas Tungsten Arc Welding 2-inch Pipe - 2G and 5G Flux Cored Arc Welding Plate - 3G and 4G VOCATIONAL Hobart Institute of Welding Technology 400 Trade Square East, Troy, Ohio 45373 http://www.

Skills : Fast Learner.

Description :

    1. Fused numerous tubes and structures in various sizes and positions including carbon steel, mild steel and stainless using SMAW and GTAW.
    2. Accountable for performing good quality work under constant ultrasonic testing and X-ray.
    3. Welded pipe by using GTAW (root and hot pass) and SMAW (fill and cover pass - 7018 electrode) or SMAW all the way out.
    4. Structural work done by welding with SMAW and FCAW.
    5. Performed job duties in elevated areas supported by scaffolding or by operating man lifts and scissor lifts.
    6. Prepared and operated rigging equipment to lift structures for fitting and welding.
    7. Followed blueprints in means to assemble pipe by cleaning, cutting, beveling and fitting it.
    8. Supported the business mission by providing personal equipment to allow effective performance in carrying out the job tasks.
Years of Experience
Experience
2-5 Years
Experience Level
Level
Executive
Education
Education
Bachelor Of Science

Pipe Welder Resume

Objective : Focused pipe welder adept at welding and fitting stainless steel and carbon steel short pipes, flanges and couplings. Capable of operating lifts and fork trucks. Fast learner who is highly results-driven.

Skills : Welder, Fitter.

Description :

    1. Installed valves, hangers, supports and flanges inside piping systems.
    2. Assembled and installed a variety of valves and fittings.
    3. Eliminated risks by correctly identifying potential safety hazards.
    4. Interpreted blueprints to determine locations, quantities and sizes of materials required.
    5. Secured pipes to structures with clamps, brackets and hangers.
    6. Removed rough spots from work pieces with portable grinders, hand files and scrapers.
    7. Clamped, held, tack-welded, heat-bent, ground and bolted component parts to achieve required configurations and positions.
Years of Experience
Experience
2-5 Years
Experience Level
Level
Junior
Education
Education
Master of Science

Pipe Welder/Technician Resume

Summary : Experienced Construction Laborer knowledgeable about the tools, materials and methods used in road construction. Pipe and Structural Welder specializing in welding. Over 30 years in the construction trade.

Skills : Welding, structural fitting.

Description :

    1. Building of a heat water/waste water nestle transfer facility.
    2. Working as both a pipe/structural welder and fitter.
    3. Pulled close up and bull ganging of pipe and pipe componets.
    4. Hot tacking and welding out for iron workers.
    5. Welded out all structural componets and moment welds.
    6. Pulled field measurements, bolt up for both pipe and structure.
    7. Welded out pipe in GTAW/SMAW combination welds.
Years of Experience
Experience
7-10 Years
Experience Level
Level
Management
Education
Education
BA

Senior Pipe Welder Resume

Summary : Experienced construction laborer knowledgeable about the tools, materials, and methods used in refinery construction. Qualified welder who stays current with public safety and security standards. Received training from ISTC in confined space and MARSEC. HIghlights OSHA certified Journeyman of steel construction Detail Oriented Expert in welding OSHA certified Journeyman of steel construction Detail Oriented Expert in welding 1.

Skills : Pipe Welder, Pipefitter, Cdl Driver.

Description :

    1. Responsible for welding pipes in a contruction site for a hospital.Plan, install, modify, clean, and maintain pipe systems, units, fittings, and related machines and equipment, following specifications and using hand and power tools: Plan pipe system layout, installation, or repair according to specifications.
    2. Lay out full scale drawings of pipe systems, supports, and related equipment, following blueprints.
    3. Select pipe sizes and types and related materials, such as supports, hangers, and hydraulic cylinders, according to specifications.
    4. Measure & mark pipes for cutting & threading.
    5. Cut, thread, and hammer pipe to specifications, using tools such as saws, cutting torches, and pipe threaders and benders.
    6. Cut and bore holes in structures, such as bulkheads, decks, walls, and mains, prior to pipe installation, using hand and power tools.
    7. Assemble and secure pipes, tubes, fittings, and related equipment, according to specifications, by welding, brazing, cementing, soldering, and threading joints.
    8. Attach pipes to walls, structures and fixtures, such as radiators or tanks, using brackets, clamps, tools or welding equipment.
Years of Experience
Experience
10+ Years
Experience Level
Level
Senior
Education
Education
Diploma

Pipe Welder Assistant Resume

Summary : Speak both English and Spanish. I also have more than 20 years of welding experience Knowledge of OSHA safety and regulations Highly motivated and able to work in a team environment.

Skills : Certificated pipe welder.

Description :

    1. Followed company policies and process stated in the Employee Manual and SOP (Quality System).
    2. Drive continuous investigation and communication for improvement in safety, quality and productivity in the manufacturing process.
    3. Welded any parts assigned by Management using recommended process per specifications of the Engineering Department.
    4. Collected material for job assignments per BOM and/or prints from inventory.
    5. Pulled tags for inventory, materials, parts and supplies for reordering in a timely manner.
    6. Kept area and equipment clean and safe for proper functionality per OSHA requirements and preventive machine maintenance schedules.
    7. Abide by the recommended personal protective equipment (PP/E) Prepared parts for paint by removing any particulates, non-conforming welds and/or spatter by recommended process.
    8. Worked with Management on prototypes and jigs.
Years of Experience
Experience
7-10 Years
Experience Level
Level
Management
Education
Education
Diploma

Pipe Welder Resume

Objective : Certified Shielded Metal Arc Welding Certified Flux Cored Arc Welding all positions ( 1G,2G,3G,4G) Gas Metal Arc Welding Blueprint Reading and Drawings Torch and Plasma Cutting Pipe welding [] 5mm pipeliner , 7018) Pipeline Experience Layout and Fabrication Training Experience Bilingual: English and Spanish Available to work nights and weekends Available to work extended hours.

Skills : Pipe Welder.

Description :

    1. Installed mechanical rooms for heating and cooling units.
    2. Skilled in the use of a variety of hand and power tools to disassemble vehicles, shelters and vans by removing such items as windshields, frames, doors, fenders, cabs, brackets, radiators, and other similar components.
    3. Effects repairs to these, reinstalls and aligns such components on the assembled vehicle.
    4. Removed dents, gauges and otherwise damaged sections of panels and components using hammers and ding blocks.
    5. Used filler material, such as lead or plastic filler, smoothes surfaces by grinding, sanding and prepares surfaces for painting.
    6. Used cutting torches, hand and power saws, and chipping hammers to remove damaged areas of cabs, panels from vehicles, and shelters.
    7. Repaired components removed or fabricates new components and re-attaches to vehicles or shelters, utilizing gas or electric welding techniques.
    8. Applied heat to straighten or shrink as required.
Years of Experience
Experience
2-5 Years
Experience Level
Level
Executive
Education
Education
Bachelor Of Science