Solder Technician Resume Samples

The basic job description of a Solder Technician position includes soldering together various components and assembling fabricated metal products by using the soldering rods. Typical work activities depicted on the Solder Technician Resume include tasks like – melting and applying solder on edges and joints, grinding and bending edges of workpieces that needs to be joined, removing pieces from motel solder, cleaning workpieces using file or chemical substances, cleaning tips of soldering iron, melting and separating soldered joints, applying fluxes on surfaces, and fabricating metal products using soldering equipment.

To successfully carry out the above-mentioned roles and responsibilities, these traits are expected from Solder Technicians – an excellent hand-arm movement to install and position things, knowledge of using control mechanisms, physical strength, manual dexterity, and outstanding monitoring skills. Most of these technicians have a vocational diploma or training in the relevant field.

Solder Technician Resume example

Solder Technician Resume

Objective : Over 5 years of experience in Technical Support Engineer, supported by 3 years of Software Quality Assurance Engineer.

Skills : Excellent computer and customer service .

Description :

    1. Build from blueprints.
    2. Performed final assembly of electronic devices from sub-components
    3. Used an Ethernet cutter, thermal cutter.
    4. Applied numbers, labels, heat shrink.
    5. Worked with assorted tools, heat guns.
    6. Accomplished IPC Certification WHMA-A-620.
    7. Performed troubleshooting work to resolve customer trouble calls.
Years of Experience
Experience
2-5 Years
Experience Level
Level
Junior
Education
Education
Diploma


Sr. Solder Technician Resume

Objective : To secure long term steady employment with a team based employer. To become valued employee with a company that will allow to grow and develop skills.

Skills : Cut, Measure, Sort, Verify, Solder, Strip and Crimp.

Description :

    1. Assembled and soldering of circuit boards.
    2. Wrote blueprints, drawings, diagrams, and assembly notes.
    3. Used microscope and magnification tools on a daily basis.
    4. Ensured the circuit board meets the necessary requirements based on customers' needs.
    5. Prepared parts for assembly.
    6. Used different types of solder including water-soluble, and no clean solder.
    7. Cleaned and drying of circuit boards.
Years of Experience
Experience
2-5 Years
Experience Level
Level
Junior
Education
Education
Diploma


Jr. Solder Technician Resume

Objective : To serve in responsible capacity, providing expert leadership, dependability and dedication.

Skills : Assembly, Shipping And Receiving, Inspection.

Description :

    1. Populated circuit boards using a microscope, solder irons, and many other tools and supplies to complete the task at hand.
    2. Ran computer programs and ovens to test transponders.
    3. Debugged failed boards with a number of programs and meters until they passed every test.
    4. Constructed and populated fuel rod sensors, tested them with jet fuel with proper safety measures and computer programs until they passed inspections.
    5. Refurbished circuit boards that were damaged from use.
    6. Responsible for overseeing and training new employees to fabricate all listed above.
    7. Maintained a clean and safe working environment.
Years of Experience
Experience
2-5 Years
Experience Level
Level
Junior
Education
Education
Diploma

Solder Technician III Resume

Summary : To obtain a position where can use skills and hardworking ability to benefit employer and be of service to others. An ambitious student with solder tech experience and impressive knowledge in electronic devices for automobiles.

Skills : Can work SMT or Through- Hold parts, Both Commercial.

Description :

  • Soldered small computerized chips onto motherboard as shown on the blueprint.
  • Placed electrical cords in heatsink handle and filling them with black liquid bonding.
  • Wires for finishing touches on light fixtures as well as testing the product cleaning, packaging.
  • Solder LED lighting to illuminate large metal frames with glass photos Frame assembly.
  • Performed Test, Test Repair, Wire Harness (Government Contracts), Wire wrap, SMT Repair and Inspection, Test repair, and Final Repair Inspection.
  • Performed Lead position at the offsite plant of component replacement and test of 3,500 assemblies and made delivery deadlines for a three month period.
  • Identified good and bad solder in pcb by ensured proper amounts of solder, contamination, solder joint, and quality.
Years of Experience
Experience
10+ Years
Experience Level
Level
Senior
Education
Education
A.A.S In Electrical

Solder Technician II Resume

Objective : To obtain employment with an electronics manufacturing company that can utilize acquired knowledge and experience with a potential for growth.

Skills : Leadership, Over Twelve Years In Customer Service, Solder Work.

Description :

    1. Built multi-level box build assemblies.
    2. Included prepping parts, soldering, wiring, mechanical, and labeling units.
    3. Soldered thru-hole and surface mount components on PCB's.
    4. Prepped parts, masks, and label boards.
    5. Set up and break down of line.
    6. Performed light rework both thru-hole and surface mount Soldered with ROHS, no clean and lead solder assemblies.
    7. Inspected mechanical and visual parts with a microscope, high gage mechanical and digital (h14-2), caliper, and micro torque tester to assure rotational perform.
Years of Experience
Experience
2-5 Years
Experience Level
Level
Executive
Education
Education
Diploma In Medical

Solder Technician I Resume

Objective : To obtain a position, where experience and skills are highly utilzied and the ability to work well with others would be an asset.

Skills : Quality Assurance, Soldering, Shipping And Receiving, Assembly, Forklift Operator.

Description :

    1. Inspected and assembled Chrysler computer units for Chrysler jeeps and trucks.
    2. Repaired broken/damaged connectors and housings.
    3. Soldered on micros, e-proms, transformers, transistors, caps, repaired/replaced missing, or pulled solder pads.
    4. Tested the computer boards thoroughly through hot testing, cold testing, and final testing to be packaged and shipped out.
    5. Operated the forklift for shipping and receiving when needed.
    6. Kept productivity balanced and shipments of sold inventory moving out the door.
    7. Used Effective interpersonal and team-building skills.
Years of Experience
Experience
2-5 Years
Experience Level
Level
Executive
Education
Education
Criminal Justice

Asst. Solder Technician Resume

Headline : To find a long term opportunity that will find interesting and challenging that also allows to expand and perfect skills.

Skills : Computer, Technician, Builder.

Description :

    1. Inspected iPad and iPod circuit boards for corrosion, removed power/volume cable and batteries, and soldered on new ones.
    2. Tested and then troubleshot/diagnosed if new parts failed to fix the problem.
    3. Ordered parts.
    4. Inspected video screens for defects.
    5. Taught the solder team how to use the multimeter to check for voltages at the power/volume cable pads of circuit board and flex cable and also found a test point on circuit board where missing voltage.
    6. Revealed a lack of power from the circuit board and not battery issues.
    7. Used Multimeter use, soldering, patience, attention to detail.
Years of Experience
Experience
5-7 Years
Experience Level
Level
Executive
Education
Education
Diploma In Electronics

Solder Technician/Worker Resume

Headline : Seeking a position in management which strong communications, supervisory experience, and strong work ethic can be utilized to positively impact the company's mission statement.

Skills : Soldering, Repair Debug Inspection Shipping, Receiving invoices.

Description :

    1. Assembled and create custom surveillance systems for locomotives worldwide.
    2. Soldered motherboards, wires, and connectors.
    3. Built and programmed cameras, cables, power sources, drives, and other surveillance system components.
    4. Assisted with repairs of various products we sell.
    5. Met consistent and upcoming deadlines in a high paced work environment.
    6. Built to military standards, specifications, and tolerances.
    7. Able to read blueprints and drawings.
    8. Repaired and maintained all building-related tools.
Years of Experience
Experience
5-7 Years
Experience Level
Level
Executive
Education
Education
Bachelor Of Arts

Associate Solder Technician Resume

Summary : Self motivated, hardworking, team oriented, looking for a career utilizing skills and experience in property management.

Skills : Hardware troubleshooting, 16 years Windows XP 10 years.

Description :

    1. Modified prototype boards for the Engineering Department.
    2. Replaced, removed, and soldered wires to components.
    3. Took apart units and reassembled them and changed the serial number.
    4. Managed to complete assigned tasks in a timely manner so the units could be tested.
    5. Assisted with laser operations, inspect and pack parts.
    6. Performed microscopic and visual inspection at a seated inspection bench/station.
    7. Worked within a manufacturing environment, including moderate noise and chemical odors.
Years of Experience
Experience
7-10 Years
Experience Level
Level
Management
Education
Education
Diploma

Solder Technician Resume

Objective : Self-motivator, hard worker, and a self-starter. Believe in performing each task with the highest level of integrity.

Skills : Forklift Operator, Soldering, Computer, Sales.

Description :

    1. Repaired and refurbishes cable set-top boxes to current ECN's.
    2. Used Soldering and a variety of hand tools.
    3. Inspected and tested components, assemblies, and wires Received and correctly processed both written and verbal instructions, prints, and work orders.
    4. Obtained appropriate tooling and fixtures.
    5. Solder components onto flex boards using a scope and case completed merchandise.
    6. Came up with new ways to ensure correct soldering without damage to boards and components.
    7. Used soldering, wiring, the casing of microscopic components.
Years of Experience
Experience
2-5 Years
Experience Level
Level
Executive
Education
Education
Diploma