Staff Design Engineer Resume Samples

A Staff Design Engineer undertakes several essential functions relating to the engineering department. The main task is to take responsibility for hardware and software development. Other duties are listed on the Staff Design Engineer Resume as – working alongside the technical team to maximize efficiency for product design and development; mentoring and training less experienced staff; coordinating with clients to determine procedures and the needed products; conducting design analysis, reviewing product specifications to ensure accuracy; making recommendations for product and component designs and solutions; handling risk assessments; technical support, and task scheduling, and developing systems and subsystems.

The most sought-after skills for the post include the following – proficiency in mathematics and scientific concepts; thorough knowledge of the industry-related technology; strong communication skills, and creativity. Staff Design Engineers normally hold a relevant engineering degree and sufficient work experience.

 

Staff Design Engineer Resume example

Staff Design Engineer Resume

Objective : As a Staff Design Engineer, responsible for Monitoring construction progress of water projects financed through loan agreements. and also responsible for Working in a team setting with internal staff, engineering consultants, project partners, & others during the course of a project, etc.

Skills : RTL Logic Design, RTL Verification, Verilog RTL Coding, RTL Development & Debugging, Asic, Soc, IP Design, Logic Synthesis.

Staff Design Engineer Resume Sample

Description :

  1. Managed one or more projects to increase Idaho's surface water storage in cooperation with partner agencies.
  2. Assisted with operating managed aquifer recharge program for the Eastern Snake Plain Aquifer.
  3. Provided recommendations for managed recharge infrastructure and other aquifer stabilization projects for the Eastern Snake Plain Aquifer.
  4. Managed the design and construction of aquifer recharge infrastructure projects, or significant portions of projects.
  5. Monitored construction progress of aquifer stabilization projects accomplished through partnership agreements.
  6. Managed development of water resource and supply projects on behalf of the IWRB from feasibility to construction.
  7. Identified strategies for the stabilization of other aquifers and carry out those strategies.
              Years of Experience
              Experience
              2-5 Years
              Experience Level
              Level
              Junior
              Education
              Education
              BS In EET


              Staff Design Engineer Resume

              Objective : An experienced engineer with mentoring and teaching experience and a multidisciplinary background motion control, mechanical design, analog circuits, computational physics, embedded and FPGA-based design, instrumentation and data acquisition, power management, motor control, and power electronics. Expert user of LabVIEW, Solidworks, Cadence, Altium, MATLAB/Simulink.

              Skills : Microsoft Office, Autocad, Microstation SE, Icons - Project Management Software.

              Staff Design Engineer Resume Example

              Description :

              1. Investigated Semiconductor Product Opportunities in Energy Efficient Systems (Green Area R&D): Battery Management Systems, Variable Speed Drives electronics and control algorithms for syn.
              2. Combined BMS and motor control for small EV's.
              3. Participated in NS Labs university project studying inverter/converter designs for motor drives and their control.
              4. Participated in a joint university project on power management circuit topologies for LEDs.
              5. Wrote HDL code to monitor and control a power MOSFET gate drive with the LabVIEW interface.
              6. Conducted temperature chamber programming and PC to chip (USB to SPI) communications under LabVIEW with MATLAB post-processing.
              7. Participated in the design and development of a multilevel battery grid storage system.
              Years of Experience
              Experience
              2-5 Years
              Experience Level
              Level
              Executive
              Education
              Education
              GED


              Staff Design Engineer Resume

              Summary : Self Motivated Staff Design Engineer with over 17+ years of experience specializing in Passive Radio Frequency components and wireless systems design/integration with extensive experience in TEM cavity and TE01 Dielectric Resonator filters. Program Management, Project Management experience (Successfully lead many designs to production release on time and to budget).

              Skills : Green Belt, Black Belt, DOD Secret Security Clearance, Communication.

              Staff Design Engineer Resume Format

              Description :

              1. Designed 802.3/3u/3z MII/RMII/GMII interface include FIFO handler in different and burst data rates and clocks.
              2. Performed evaluation of MTIP 802.3/3u/3z Gigabit switches IP Designed Ethernet PHY controller to check the status via serial management channel.
              3. Designed the SLOC controller to establish link setup with QPSK/16QAM/64QAM.
              4. Performed logic simulation, logic synthesis, Formality, DFT, ATPG, timing analysis, and Xilinx FPGA evaluation.
              5. SERDES Designed frame architecture includes dc balance and synchronization.
              6. Designed dc balance without 8B/10B line code, receiver synchronization, digital controller for analog PLL loop for no external reference clock.
              7. Performed integrated transmitter and receiver chip, logic simulation, logic synthesis, Formality, DFT, ATPG, timing analysis, and evaluation.
              Years of Experience
              Experience
              10+ Years
              Experience Level
              Level
              Senior
              Education
              Education
              GED

              Staff Design Engineer Resume

              Objective : As a Staff Design Engineer, responsible for Performing design and analysis (such as tolerance analysis, FEA, DOE's, simulated use testing, etc.), and leading design activities of high complexity product elements.

              Skills : RTL Logic Design, RTL Verification, Verilog RTL Coding, RTL Development Debugging, Asic, Soc, IP Design, Logic Synthesis.

              Staff Design Engineer Resume Model

              Description :

              1. Completed Project Management including; RFQ's, RFP, s Contracts, Statement of Work, Technical Specifications, schedules, and budgets.
              2. Researched, developed, and designed customer projects including; Schematic and PCB design, BIOS.
              3. Integrated custom Pentium motherboard with 6 onboard PCI based graphics controllers using PCI-PCI bridge chip, SATA and SCSI HD controllers, multiple RAM and PCIe expansion slots.
              4. Updated firmware for BIOS for multiple graphics controllers support.
              5. Hardened, Portable Electronic Voting Machine using PC104+ embedded computer system with touchscreen display.
              6. Displayed and controlled for the fire control system for the JSF program.
              7. Touched panel interface, custom PWM for backlighting.
              Years of Experience
              Experience
              2-5 Years
              Experience Level
              Level
              Junior
              Education
              Education
              BS In EET

              Staff Design Engineer Resume

              Objective : As a Staff Design Engineer, responsible for Providing leadership on a multi-functional project team through all phases of the design control process. Including planning & executing projects from concept through the launch, etc.

              Skills : Management Skills, Designing, Testing.

              Staff Design Engineer Resume Model

              Description :

              1. Designed in the BYBPSTPGM algorithm, by implementing schematic changes.
              2. Fulled chip verification using HSIM, circuit check using CCK (Worked the first time and In production) Worked on several 58nm, 1.8v flash memory product family derived from the prototype.
              3. Reduced the die size for a lower density product by removing the redundancy fuse block and using the power-up fuse block to read the redundancy information along with option fuse bits and unique ID during power-up read.
              4. Designed integration of negative standby Pump by implementing schematic changes, to have unselected Word Line's at a negative voltage during reading, PGM, and verify operations to reduce the leakage current from the unselected Word Lines due to over-erased cells.
              5. Designed and tested 2.4GHz receive chain for BT/WiFi.
              6. Owned blocks as LNA, MXGM, mixer, TIA, LO divider.
              7. Designed and tested processor-based missile guidance and control circuit boards.
              Years of Experience
              Experience
              2-5 Years
              Experience Level
              Level
              Executive
              Education
              Education
              G.E.D

              Staff Design Engineer Resume

              Objective : Well rounded ASIC Design engineer with hands-on experience in all design disciplines spanning from Architecture, Design, Verification, Synthesis/STA, CMOS circuit design, and simulation. In-Depth knowledge of ASIC Design and Verification Flows. Working experience and knowledge of Enterprise and Client SSD, SATA, SAS, NAND Flash, ONFI, DDR, PCI, PCCARD32, SD, SPI, MMC, ECC, MS/MS PRO, SPI-4/LVDS, USB, PATA, UDMA, CDMA, PCIe, ARM Cores, MMU, SCI, I2C, VGA/SVGA, ISA/EISA.

              Skills : Registered Professional Engineer in NJ and PA, Developing.

              Staff Design Engineer Resume Sample

              Description :

              1. Analyzed failures from internal evaluations and failures from product qualifications with Original Equipment Manufacturers (OEMs) of set-top boxes.
              2. Provided detailed FA reports for root cause and follow up with corrective actions.
              3. Tested and qualified test software, test systems, test racks, test chambers, tools, and test fixtures for manufacturing operations that guaranteed time-to-market production of HDD.
              4. Developed a detailed test plan by eliminating redundant tests.
              5. Measured and reduced cycle time by 30% resulting in a $2 million saving in manufacturing equipment cost.
              6. Documented and communicated daily test status & summary: yield, issues, failures, and test progress.
              7. Provided technical data from the test process to make decisive decisions for head/media qualifications.
              Years of Experience
              Experience
              2-5 Years
              Experience Level
              Level
              Executive
              Education
              Education
              G.E.D

              Staff Design Engineer Resume

              Headline : Seeking a Staff Design Engineer with 2 years of experience in Performing architectural studies to determine optimal hardware implementations of PHY and MAC layer designs to meet product requirements. Responsible for Developing and reviewing detailed and concise architecture and design specification documents, etc.

              Skills : Silicon Design and Implementation Consultant, Assisting.

              Staff Design Engineer Resume Format

              Description :

              1. Responsible for physical verification of the chips and libraries as well as the generation, release, and maintenance of the rule sets for DRC, LVS, and ERC.
              2. Automated key rule deck verification with excellent quality through extensive regression QA test case development Proactively identified and developed creative solutions for performance and memory usage bottlenecks within the DRC and LVS rule decks, improved quality through the removal of unwanted variance from foundry specifications.
              3. Performed schematic and layout creation using Virtuoso layout XL and full verification at the block/chip level verification.
              4. Generated and fully verified pad-ring schematic and layout data Development & maintenance of front-end and back-end rule decks.
              5. Performed block-level/chip-level verification.
              6. Processed development of RF circuit building block in a 0.18 um SiGe BiCMOS process technology.
              7. Performed detailed transistor-level RFIC design and development, focusing on highly-efficient and linear RF power amplifiers, primarily between 2 and 7 GHz for next-generation WiFi and 5G NR applications.
              Years of Experience
              Experience
              5-7 Years
              Experience Level
              Level
              Executive
              Education
              Education
              Bachelor Of Science

              Staff Design Engineer Resume

              Headline : Staff Design Engineer with 4 years of experience in Significantly contributing to aspects of project management including scope definition, scheduling, budgeting, and contingency planning. Responsible for Providing domain expertise to the organization across at least one field (e.g., plastics, metals, DFM/A), etc.

              Skills : Project Management, Excel, Employee Relations, Email, Editing, Editing, Training, Team Building.

              Staff Design Engineer Resume Model

              Description :

              1. Developed new concepts for meeting customer needs.
              2. Developed path analysis to meet the desired product.
              3. Trained new employees and interns.
              4. Assisted engineering manager in the process of day to day engineering department management.
              5. Assisted fellow engineers in completing project implementation in a timely manner.
              6. Designed multi-chip modules, integrating multiple technologies.
              7. Designed and ran detailed circuit and EM simulations using RFIC EDA tools (e.g. Keysight ADS, Cadence) to accurately predict the performance of the final product.
              8. Reviewed, analyzed, and provided recommendations regarding water projects proposed to be accomplished through loan agreements.
                  Years of Experience
                  Experience
                  5-7 Years
                  Experience Level
                  Level
                  Executive
                  Education
                  Education
                  Bachelor Of Science

                  Staff Design Engineer Resume

                  Headline : As a Staff Design Engineer, responsible for Performing die size cost and benefits analysis of new array circuits and algorithms prior to implementation. and also responsible for Effectively working with the Product design teams to ensure the accurate implementation & timely completion of array schematics and physical design drawings, etc.

                  Skills : Developing, Management, Communication.

                  Staff Design Engineer Resume Model

                  Description :

                  1. Provided technical input in initial consultations with federal and state agencies as well as non-governmental organizations.
                  2. Managed engineering tasks for projects.
                  3. Collaborated with Project Managers, Project Coordinators, and Program Managers contributing to overall project success in the range of $1M to $100M.
                  4. Developed new client relationships to further expand organizational success as a leading oil and gas consulting company.
                  5. Performed pipeline stress analysis including finite element analysis and structural design methods.
                  6. Managed and performed HDD design and borehole stability analysis.
                  7. Implemented RF integrated circuits including the layout of all active and passive circuit elements, along with design verification (design rule checking and layout-versus-schematic).
                    Years of Experience
                    Experience
                    5-7 Years
                    Experience Level
                    Level
                    Executive
                    Education
                    Education
                    High School Diploma

                    Staff Design Engineer Resume

                    Objective : A well-experienced passionate team playing engineer is looking for new opportunities to maximizing the performance and contribution utilizing experience, knowledge, and creativity. Comprehensive design experience in circuit design and problem-solving. Design experience spans transistor-level circuit, DRAM and SRAM memory circuit, I/O circuit, high-speed circuit, low power circuit, and analog and mixed circuit from concept to product release. First-silicon success contributes to project cost-down, in addition, to meet fast time to market demand.

                    Skills : Planning, Communication, Managing, Testing.

                    Staff Design Engineer Resume Model

                    Description :

                    1. Responsible for guiding a project from feasibility all the way to volume manufacturing.
                    2. Responsible for communicating status via weekly meetings and identifying technical and schedule concerns.
                    3. Worked with Program Managers, customers, and Team Members to estimate tasks and ensure the project is delivered successfully on schedule.
                    4. Interfaced with internal groups such as Library and Intellectual Property (IP) teams to coordinate deliveries and new development.
                    5. Responsible for IO interface definition, package selection, power analysis, synthesis, timing analysis, Logic Equivalency Checking, DFT insertion, faulty grading, verification, and manufacturing vectors.
                    6. Planned and supported test and measurement for evaluation of prototype designs. Document and summarize design data to support team members.
                    7. Supported Product Marketing and Applications Engineering throughout the product development lifecycle with product prototypes and samples, data and design summaries, and application circuit recommendations.
                        Years of Experience
                        Experience
                        2-5 Years
                        Experience Level
                        Level
                        Executive
                        Education
                        Education
                        B.S. In Electrical Engineering