The Subsea Engineer is responsible for the delivery of subsea technology solutions for all major deepwater projects in the assigned region. A well-drafted Subsea Engineer Resume mentions the following work activities – supporting the integration testing, installation, and commissioning of subsea hardware including procedure development, onsite supervision, and coordination of technical and logistical interface issues between disciplines and suppliers; tracking and reporting cost and delivery schedule of the scope of work, liaising between contractors, staff, and project managers for effective communication and planning; reviewing specifications, and inputting on the design of subsea production systems, sourcing goods and services for the successful delivery of projects, and providing technical and engineering support and guidance to offshore or on-site teams.
The nature of the job demands the following skills and abilities – highly specialized in MUX electronic control systems and regulation technology, including pneumatic and electrical systems, skilled within fault finding and troubleshooting skills as well being able to read and analyze drawings, great interpersonal skills, the ability to communicate with people, and the ability to adhere to safety regulations. Preferred candidates should have a relevant engineering degree.
Summary : Subsea Engineer with 14 years of experience working offshore. Well experienced in carrying out the daily duties of an onboard Senior Subsea Engineer/Subsea Supervisor. Began my oilfield career as a roustabout, roughneck, and then derrick hand before entering the field of subsea. I possess a solid understanding of rig operations and how they integrate with the BOP.
Replaced operators on the WOM stack mounted choke and kill valves.
Surface tested Hydril Bop with IPT prior to running Bop's.
Conducted Finite Element Analysis with Autopipe and StaadPro on subsea equipment to ensure that they are up to standards dictated by API, ASME, DNV etc.
Created and checked mechanical part, calculations, bill of materials and drawings to ensure that they satisfy customer requirements and the equipment design satisfies code standards dictated by API, ASME, DNV etc.
Created assembly and test procedures for subsea equipment Creating design files, test procedures, operating manuals, and other documentation for designed equipment.
Assisted with project planning and building procedures.
Experience
10+ Years
Level
Senior
Education
Bachelor Of Science
Subsea Engineer Resume
Summary : Over ten years of domestic and international experience in engineering, project management, technical sales, management and business development; highly involved with project management in the Oil / Gas Industry projects. I am adept at leveraging mechanical engineering proficiencies, industry knowledge, equipment design, and procedures.
Experienced with Hydraulic and other related Subsea fluid systems.
Ability to read Hydraulic Schematic Drawings to Troubleshoot and Problem Solve efficiently.
Enforced company policies and regulations, ensure quality standards are met (API) Superior communication skills, both written and verbal.
Performed all required duties on the drill floor with attention to detail.
Performed general maintenance on the Hydril Bop system.
Rebuilt multiple Hydril Autoshear systems.
Replaced seals in the Hydril dual GX annular and performed a full chamber test on both annulars.
Experience
10+ Years
Level
Senior
Education
Bachelor Of Science
Subsea Engineer Resume
Headline : A qualified and self-motivated Subsea Engineer, able to overcome challenges and difficulties in a stressful and fast paced work environment. Able to work as a standalone Engineer or with a team during running and retrieval of the BOP. Very reliable, honest and hard working. I have the ability to adapt affectively to any changing situation.
Skills : Proficient In Microsoft Office, Training Skills.
Description :
Trained as a subsea engineer with hands on and classroom training in the maintenance, operation and repair of shallow and deep water BOP stacks.
Followed a formal training period I was sent to Halifax Nova Scotia to rebuild a deep-water stack that had not been properly moth balled.
Disassembly and machined and hard chroming etc.
Sent to witness a development test on an experimental multi-pin deep-water subsea hydraulic stab plate.
Had passed two shop tests and failed two offshore installation attempts.
Observed that the box and pin should be flooded as would be the case offshore.
Maintained and troubleshoot hydraulic systems, equipment and perform preventative maintenance.
Experience
5-7 Years
Level
Executive
Education
BS In Marine Engineering
Subsea Engineer Resume
Headline : A highly effective Subsea Engineer Professional, who meets challenges skillfully and creates positive change. A creative and detail-oriented professional with a record of success in project management; on-time and on-budget project delivery; and a proven ability to foster strong positive client relations.
Placed in a special Subsea Engineer group that consisted of less than 24 engineers to go on separate rigs and assist in special needs that couldn't be accomplished with the usual personnel on board for either not having enough knowledge or the job needed to be completed in a short period of time.
Responsible for assisting in preparing BOP for launching, from pressure testing to complete tear down and rebuild of any part on a BOP and locating all good information for setting up of hydrostatic and surface pressures.
Trained and assisted in maintaining high-pressure unit to working specs, diverter panel, fluid reservoir unit, and all surface equipment related to the BOP.
Worked with Direct Riser Tensioners, Wireline Riser Tensioners, and Active Heave Compensator systems, maintaining proper working specifications and setting up the proper functionality of equipment depending on water current and riser angle and assist in any needs to the Tool Pusher and Driller for making jobs safer and more efficient.
Ensured that all working APVs, standby APVs are in proper specs.
Assisted and prepared riser joints for a rundown, ensured that all bolts, seals, sealing areas, buoyancy packets are in proper working conditions.
Prepared all tools for proper torque of bolts on riser joints.
Experience
5-7 Years
Level
Executive
Education
Associates In Science
Subsea Engineer Resume
Headline : A highly dedicated and motivated team player in the risk prevention and management professional with a proven ability to work in a multi-oriented and multicultural environment, coupled with a track record of excellent interpersonal and communication skills with the capacity to accomplish Optimum productivity with minimum supervision.
Worked on including Subsea Dual bore and Horizontal Xmas trees for Akpo and Usan deepwater development projects.
Stripped and re-built STM-15 TOOLS; Drill ahead tool, boll weevil, combination tool, wear bushing tool, BOP weight set tool, casing hanger seal assembly running tool(CHART), 36 casing running tool, etc.
Responsible for the preparation and processing of permit to work (PTW), Task risk assessment (THA), etc.
Reworked/Refurbished Subsea Wellhead and Running/Retrieval tools.
Assisted subsea personnel on board to maintain choke and kill manifold, ensure that all valves are working correctly and perform any overhaul if needed, and assist driller in any situation when needed.
Worked locally and internationally to design and facilitate the manufacture and testing of subsea manifolds.
Conducted visual and dimensional inspection of equipment consistent with industry requirements / standards / methods.
Experience
5-7 Years
Level
Executive
Education
MS
Subsea Engineer Resume
Objective : Contributed to the review of procedures, work scope, and documentation required for project operations Test (SIT) on subsea equipment, Site Receipt Test (SRT) & Pre-Shipment Checks on Subsea Xmas trees and subsea equipment Testing and flushing of Subsea Control Module (SCM) Rework/Refurbishment of Subsea Oil tools and Controls Equipments Umbilical's (Electrical and Hydraulic flying leads), Subsea Control Module (SCM).
Skills : Subsea Engineer, Training Skills.
Description :
Controlled of third-party installation/maintenance/modification work.
Involved in detailed design, interpreting drawings, and test procedures, and ensuring that the work conducted satisfies the design requirements.
Provided general technical assistance to the Lead Field Service Engineer (FSE) in the operation, maintenance, repair, logistic support, and installation of company products.
Assisted Lead Field Service Engineer in scheduling maintenance & workload, assuring that equipment & parts meet established schedules.
Provided on-site interpretation of data and technical instruction.
Executed unplanned maintenance activities (rig down) as directed by the lead FSE.
Reviewed reported malfunctions and identify/analyze any undesirable trends & make recommendations on findings.
Experience
2-5 Years
Level
Executive
Education
MS
Subsea Engineer Resume
Objective : To obtain a challenging Subsea Engineer position with a progressive growth-oriented company whereby my experiences, education, and abilities could be utilized to our mutual benefit.
Coordinated the efforts of designers and drafters to meet codes and drawing standards.
Worked With vendor P & IDs and suggested alternatives to meet with required codes and specifications.
Experience
2-5 Years
Level
Executive
Education
MS
Subsea Engineer Resume
Summary : Highly qualified Subsea Engineer with experience in the industry. Enjoy creative problem solving and getting exposure on multiple projects, and I would excel in the collaborative environment on which your company prides itself.
Membered of the Subsea Department onboard the 6th generation drillship Titanium Explorer.
Ensured that all preventative maintenance takes place in accordance with OEM specifications.
Created End of Well Workscopes for all maintenance and repairs for well control equipment.
Created test plans for all pressure testing of well control equipment.
Ensured that all equipment is installed, operated, and maintained in accordance with all regulatory guidelines and regulations (CFR, API, OEM) - Assist with maintaining the Blow Out Preventer (BOP), Diverter, Riser, Tensioners, and other associated subsea equipment in accordance with the AMOS2 guidelines.
Played a key role in planning and executing upgrades on BOP from 5 to 6 cavities.
Upgraded was completed ahead of time curve and latched on first well for 10+ months with zero downtime in regards to subsea equipment.
Experience
10+ Years
Level
Senior
Education
High School Or Equivalent
Subsea Engineer Resume
Headline : To succeed in a challenging and growth-orientated opportunity with a prominent company that offers innovation, integrity, and quality service, while having the opportunity to grow professionally.
Skills : Mechanic, First Aid, Heavy Equipment Operator, Hydraulics.
Description :
Routined and bespoke services on BOPs.
Responsible for maintenance, upgrades, and replacing the necessary parts needed to ensure the BOP is successful when it returns to the wellhead.
Required to work and be proficient on Cameron, Hydril, and Schaffer products, as well as control components, to include rebuilding shuttle valves, POD valves, regulators, and SPM's.
Responsible for daily and weekly reports for work completed.
Disassembled, repaired, and maintained control pods, pipe rams, ram locks, failsafe valves, connectors, and various equipment on the surface and BOP stack on drillships, semi-submersible, and jack-up drilling rigs.
Performed end-of-well maintenance.
Worked in shipyards during BOP overhauls.
Experience
5-7 Years
Level
Executive
Education
Bachelor Of Science
Subsea Engineer Resume
Summary : Over 10 years deepwater offshore experience, currently as a Subsea Engineer on an ultra-deepwater drillship with a 5th Gen Shaffer NXT BOP. My goal is to be a specialist within my field as a subsea superintendent or a subsea specialist.
Skills : Operational Skills, Maintenance Skills.
Description :
Worked with new build project, NOV/SHAFFER BOP 5th, and 6th Generation MUX Control Systems.
Assisted with commissioning and fats during shipyard operations.
Managed fats at vendor facility for subsea equipment.
Assisted with and perform end of good planning.
Well-versed in BSEE and API regulations regarding surface / subsea BOP-related equipment, required maintenance, testing, and certification.
Operated and pressured tested the BOP's on the surface and or the subsea as regulations require.
Maintained all good control equipment in accordance with the preventive maintenance system.
Creating an account is free and takes five seconds.
You'll get access to the PDF version of this resume template.
Choose an option.
Sign up with Google
Sign up with Facebook
Sign up with Linkedin
This helps us make sure you're human and prevents spammers from abusing our services.
By continuing, you agree to our Privacy Policy and Terms.
Unlock the Power of Over 10,000 Resume Samples.
Take your job search to the next level with our extensive collection of 10,000+ resume samples. Find inspiration for your own resume and gain a competitive edge in your job search.
Get Hired Faster with Resume Assistant.
Make your resume shine with our Resume Assistant. You'll receive a real-time score as you edit, helping you to optimize your skills, experience, and achievements for the role you want.
Get Noticed with Resume Templates that Beat the ATS.
Get past the resume screeners with ease using our optimized templates. Our professional designs are tailored to beat the ATS and help you land your dream job.
