Control Technician Resume Samples

A Control Technician is a building management expert who will install controls for various systems in buildings. Main roles and responsibilities listed on the Control Technician Resume include the following – solving technical problems, performing wiring, documenting work, installing DDC; troubleshooting, testing and commissioning HVAC systems and electronics; properly addressing TCP/ IP networks, reading and understanding mechanical plans and wiring diagrams; and adhering to safety standards.

Those interested in this field of work should depict the following skills and qualifications on the resume – technical expertise, ability to follow safety protocols, effective communication skills, troubleshooting skills, operational knowledge of electronic control systems, sound knowledge of a variety of electronic or digital control systems and proven diagnostic skills. An Associate-s degree in electronics or building management is commonly seen on most resumes. Work experience is as well needed.

Control Technician Resume example

Control Technician Resume

Objective : As a Control Technician, responsible for building management experts install controllers for various systems in a building, and responsible for performing wiring, solving technical problems, documenting work, adhering to safety standards, and make sure building systems run smoothly at all times.

Skills : Technical expertise, Troubleshooting, Teamwork, Attention to Safety, Effective Communication, and Computer Competences.

Description :

  • Worked in a safe manner, be able to properly use, care and maintain all tools and equipment, and keep work area and shop clean.
  • Assisted supervision with planning, development of preventive maintenance tasks and techniques as well as follow-up on open and unresolved issues as often as needed.
  • Mentored, guided, trained and tested mechanics in technical and safety competencies.
  • Able to accurately diagnose and repair assigned equipment or system failures to minimize downtime in an effort to achieve production efficiency objectives.
  • Assisted Production with routine maintenance decisions in absence of maintenance supervision or plant engineer.
  • Able to perform all duties required of the maintenance mechanics of lower skill levels.
  • Embraced and promoted timely completion of preventive maintenance and other type of company work orders.
Years of Experience
Experience
2-5 Years
Experience Level
Level
Executive
Education
Education
Associate Degrees in Electronics


Control Technician Resume

Objective : As a Control Technician, responsible for ensuring that the products manufactured fits the organizations purpose, any and all legal requirements, meets specifications and customer expectations, QC Technician I documents the products test results and provide suggestions required to attain the best quality product possible.

Skills : Food Quality, Food Safety, Gmp, Haacp, Product Quality Assurance, Quality Control.

Description :

  • Complied with Federal, State, Governmental and or any other appropriate regulatory laws or guidelines.
  • Assisted with Food safety issues; scientific and technical developments; and industry codes of practice. Report Food Safety violations.
  • Maintained, applied and reviewed for effectiveness GMP, HAACP, Organic, FDA, Kosher, SQF procedures and codes of practice.
  • Ensured standards are met in the areas of Food Safety and Product Quality.
  • Assisted with internal audits of production areas and employees to verify that all GMP and SQF standards are being followed.
  • Performed any special assignments as required by the Quality Control Lead.
  • Worked toward continual improvement of work processes, testing methodology and process control.
Years of Experience
Experience
2-5 Years
Experience Level
Level
Executive
Education
Education
High school diploma


Pest Control Technician Resume

Objective : As a Pest Control Technician, responsible for controlling pests in houses, facilities and outdoor spaces, Well-written duties like consulting with clients, developed extermination plans, applied pesticides, make sure safety guidelines are being followed, and identified pests like termites or rodents, demonstrated pest control expertise.

Skills : Attention to Safety, Customer Service Orientation, Time Management.

Description :

  • Received work orders/requests, determines the nature of problems, undertook necessary actions.
  • Operated spraying equipment, bait guns, and other various power/hand tools.
  • Maintained knowledge of applicable laws, rules and regulations governing pesticide application.
  • Maintained records and files, and prepares report.
  • Accomplished service goals of 200+ accounts per month representing $20, 000 in Revenue.
  • Learned computer database management software to update and create notes for all new and current customer service requests.
  • Inspected property, determines problems, and implemented the most effective solutions.
Years of Experience
Experience
2-5 Years
Experience Level
Level
Executive
Education
Education
High School Diploma

Control Technician Resume

Objective : As a Control Technician, responsible for the planning, estimating, scheduling, and expediting the fabrication of unique test articles, Leads and coordinates capabilities across the organization for the fabrication of hardware for aerospace and scientific programs at LaRC.

Skills : Math skills, Mechanical skills, Strong Organizational Skills, Understanding of Engineering Terminology.

Description :

    1. Responsible for oversight of operations, utilizes knowledge and expertise in fabrication, composites, tooling, machining, thermal processing, quality control, inspection, and test techniques for the performance of this work.
    2. Attended design review sessions to evaluate and develop preliminary design concepts.
    3. Designed and developed a variety of experimental research vehicles ranging from unmanned aerial systems, tunnel models, devices or system components for projects with uncertain performance requirements, incomplete or conflicting data, or techniques.
    4. Provided expertise in the areas of advanced composite structures, resin transfer, resin infusion, lightweight aero structures as well as active structures with integrated sensors and instrumentation.
    5. Offered technical and authoritative information concerning design concepts and/or modifications, available resources, explains characteristics and availability of various manufacturing processes and materials and verifies manufacturing feasibility.
    6. Served as a technical leader possessing manufacturing expertise and guidance to those engaged in activities such as the fabrication of test articles, unmanned aerial systems and wind tunnel models.
    7. Supported research and developmented and performed technical work required by a contract.
    8. Responsible for ensuring fabrication of test articles follow Langley Research Center procedures for the development of Space Flight Hardware.
Years of Experience
Experience
2-5 Years
Experience Level
Level
Executive
Education
Education
Technician

Control Technician Resume

Objective : As a Controls Technician, responsible for the development, installation, and maintenance of all production-related electrical control components, Train and manage an Electrical Controls Technician and or Controls Apprentice, cross-train maintenance staff, ensure all communication and pass down information related to controls is properly administered.

Skills : Electrical, Plumbing, Pipe Fitting skills, Mechanical Skills, Assembly, and Machining skills.

Description :

    1. Assisted in troubleshooting controls-related issues on all production equipment when issues arise.
    2. Worked closely with Production staff, QC, Engineering, IT and sub-contractors as a cross functional team member to meet all production needs.
    3. Managed and maintained all cleanliness, wire organization for new and existing controls panels.
    4. Managed and maintained all programmable logic controls (PLCs) and field laptop. Organize new and existing programs, have program locations available on field laptop and company server for easy access to crew.
    5. Managed and maintained all parts inventory related to controls.
    6. Ensured all work performed on controls and instrumentation is safely and properly executed and recorded.
    7. Developed, tracked, and implemented preventative maintenance, calibrations, and upgrades as required.
Years of Experience
Experience
2-5 Years
Experience Level
Level
Executive
Education
Education
Associate Degree

Quality Control Technician Resume

Objective : Seeking a Quality Control Technician position for an excellent,Tests and inspects products at various stages of production process and compiles and evaluates statistical data to determine and maintain quality and reliability of products by performance.

Skills : Caliper, Cmm, Manufacturing, Micrometer, Quality Control.

Description :

  • Interpreted engineering drawings, schematic diagrams, or formulas and confered with management or engineering staff to determine quality and reliability standards.
  • Selected products for tests at specified stages in production process, and tests products for variety of qualities such as dimensions, performance, and mechanical, electrical, or chemical characteristics.
  • Recorded test data, applying statistical quality control procedures.
  • Evaluated data and wrote reports to validate or indicated deviations from existing standards.
  • Recommended modifications of existing quality or production standards to achieve optimum quality within limits of equipment capability.
  • Performed destructive and nondestructive tests on materials, parts, or products to measure performance, life, or material characteristics.
  • Prepared graphs or charted of data or enters data into computer for analysis.
Years of Experience
Experience
2-5 Years
Experience Level
Level
Executive
Education
Education
High School Diploma

Manufacturing Quality Control Technician Resume

Headline : Seeking a Manufacturing Quality Control Technician to take responsible for assuring quality production and assisting with product processing functions, Responsible for Quality Control Analysis and preparation of samples for data analysis as well as accurate creation and maintenance of batch reporting and documentation per SOP, is responsible for the overall process of manufacturing product.

Skills : Documentation, Professional Responsibility ,Data Analysis, Analysis, Manufacturing, Life Sciences.

Description :

    1. Manufactured product in accordance with existing procedures and observance of good food handling practices.
    2. Verified the calibration status of the equipment / instruments and perform assays using approved test methods.
    3. Assigned lot numbers and expiration dates to intermediate and bulk products according to existing manufacturing procedures.
    4. Cleaned and maintained laboratory and manufacturing equipment and instruments. Clean and maintain laboratory & manufacturing areas.
    5. Contributed to development of validation / qualification protocols. Adhere to internal risk analysis program.
    6. Adhered and contributed to existing FMEA program.Adheres to internal safety programs (compressed gases, acids, and/ or handling of any hazm at) . Follow procedures for waste management.
    7. Monitored calibration status of laboratory instruments and equipment , to make sure no equipment or instrument out of calibration is used in operationsResponsible for accuracy of data transfer onto batch records.
Years of Experience
Experience
5-7 Years
Experience Level
Level
Executive
Education
Education
High School Diploma

Control Technician Resume

Objective : As a Control Technician, responsible for carrying out product assessment testing complying with GMP. Timely and accurate completion of all related documentation is a key part of the role, Personnel will also ensure that the laboratory and equipment are maintained to a safe and compliant standard.

Skills : Strong visual inspection skills, Written communication skills, Strong verbal communication and active listening skills, Micrometers and other quality lab tools.

Description :

    1. Performed assessment testing as scheduled on raw material, in-process and/or finished device products.
    2. Evaluated test results for compliance to specification.
    3. Recognized problems that might affect the quality of integrity of the product and communicate problems.
    4. Performed calibration and routine daily/weekly instrument maintenance to ensure accuracy of results.
    5. Identified Lean manufacturing opportunities for continuous process improvement and suggest alternatives and solutions to problems.
    6. Initiated changes to current SOPs, Trained other QC technicians or temporary technicians.
    7. Responsible for Quality Control and preparation of samples for data analysis as well as accurate creation and maintenance of batch reporting and documentation per SOP.
Years of Experience
Experience
2-5 Years
Experience Level
Level
Executive
Education
Education
High School Diploma

Quality Control Test Technician Resume

Headline : Quality Control Test Technician with 5+ years of experience in  supporting Quality Assurance function by performing customized inspections and testing on incoming components, raw materials, and purchased finished goods, Additionally, the Quality Control Test Technician works with Manufacturing.

Skills : Read, Analyze, and Interpreting Skills, Mathematical Skills, Resoaning Skills.

Description :

  • Audited lab equipment regularly to troubleshoot and perform maintenance tasks; in addition to providing recommendations for improvement.
  • Operated laboratory equipment and computers and performs other assigned work, in accordance to documented laboratory procedures, to perform chemical analyses.
  • Assisted production and R&D with problems related to the quality of samples, process improvement, etcMaintain good working relationships with coworkers and outside agencies personnel.
  • Understood and followed documents relevant to responsibilities, e.g., Work flows, Work Instructions, Checklists, Batch Records, and Logs.
  • Assisted the Regulatory Dept. by providing data for MSDS and Specifications.
  • Worked independently at times and work within a team to complete projects.
Years of Experience
Experience
5-7 Years
Experience Level
Level
Executive
Education
Education
Diploma

Process Quality Control Technician Resume

Headline : As a Process Quality Control Technician, responsible for information generated through the Q.A. systems being filed and recorded in an organized manner, reporting to the Q.A. Manager on the accuracy and completeness of daily records and any trends or deviations encountered through daily record review, Performs all plant bacterial checks including sampling, sample preparation, reading samples and recording data.

Skills : Computer Skills, Data Entry, Team Leader, Reading Skills.

Description :

  • Accurately maintained quality attribute records, daily and year to date averages.
  • Generated quality summaries/reports and distribute.Daily collecting, reviewing and filing of Q.A. data.
  • Maintained inventories and fill out purchase requisitions for all lab materials and supplies.
  • Accurately researched Q.A. data in helping prepare reports.
  • Maintained and provided written records of bacteria check results to supervisors and Q.A. Supervisor; this includes notification of supervisor when corporate standards are exceeded.
  • Maintained a file of all bacteria lab reports, be able to accurately key in information, generate reports and distribute to appropriate individuals.
  • Maintained a neat and clean work area at all times, and exhibit good personal hygiene.
Years of Experience
Experience
5-7 Years
Experience Level
Level
Executive
Education
Education
GED

Control Technician Resume

Objective : As a Control Technician, responsible for the safe and lawful operation of various electrical, mechanical, and computer-operated equipment following strict standard operating procedures, guidelines, and policies.

Skills : Mathematical skills, Strong computer, Interpersonal Skills, Manufacturing.

Description :

  • Saved company approximately $75K per week and $3.9M/year in downtime. Using Lean Manufacturing technique, improved throughput and operator morale by recommending standardization to the process of bringing a tool back into production.
  • Completed deliverable one month ahead of schedule by managing tool installation projects.
  • Received several monetary rewards for preventing potential injuries in the Fab.
  • Created an Excel spreadsheet that was utilized by all shifts which led to a real time inventory, eliminated unnecessary emergency starts and resulted in a cost savings of thousands of dollars.
  • Selected to be Team Lead back-up as a result of always getting the job done right and meeting output goals.
  • Facilitated a new protocol for automation that when loading test wafers it puts the tool down so that tool availability could be realized and then edited the specification to reflect the change.
  • Ensured consistency and efficiency of product through quality control testing and procedures.  
Years of Experience
Experience
2-5 Years
Experience Level
Level
Executive
Education
Education
Diploma