Mechanical Inspector Resume Samples

A Mechanical Inspector will take the responsibility of inspecting various electrical, mechanical, plumbing, and other systems for residential and commercial sites. The chief job description and tasks that can be commonly seen on a Mechanical Inspector Resume include – inspecting vehicles to ensure that they are up to mark, examining fixtures of machines, verifying the extent of damage, preparing inspection reports, visiting sites to perform inspections, inspecting automotive equipment, examining plans, and blueprints; discussing with architects and engineers regarding disapproved items.

Candidates seeking this occupation should be detail-oriented and ensure that the installed systems comply with the specific requirements exactly. They have to be physically fit and also be mentally aware, as some inspections or investigations can be physically hazardous. Complete knowledge of safety precautions and regulations are also expected from candidates. Due to the complex job settings, employers want to see in the qualifications of the resume in the fields of Engineering.

Mechanical Inspector Resume example

Mechanical Inspector Resume

Summary : Experience in the business environment with companies include Management Services. Set-up and operated meter charged coater in order to produce quality products.

Skills : Technical Skills, Management.

Description :

    1. Verified by inspection, using sampling inspection to ensure that products comply with requirements prior to acceptance by reading, interpreting.
    2. Assisted vendors to produce quality products by evaluating documentation for accuracy.
    3. Ensured that all quality procedures are followed by technicians and other personnel.
    4. Interfaced with receiving, production control, and project leads for proper documentation in quality acceptance of parts.
    5. Reviewed and evaluated with program and Tech Writer to produce Technical Manuals for assembly purposes.
    6. Created several check sheets for technicians and quality personnel that were used to ensure product accountability and quality.
    7. Maintained progressing and inspections reports.
Years of Experience
Experience
7-10 Years
Experience Level
Level
Management
Education
Education
B.A


Mechanical Inspector II Resume

Headline : Advanced knowledge of mechanical inspection/GD&T, proficient at print reading, experience with a CMM machine, optical comparator, micro-hite, calipers, micrometers.

Skills : Surface plate set-ups, Analytical Skills.

Description :

    1. Measured instruments such as CMM machine, micro-site, micrometers, calipers, gauges.
    2. Performed a variety of inspection tasks to determine compliance of processed daily mechanical inspection duties.
    3. Performed First Article Inspections (FAI). Took necessary actions for maintaining charts and files.
    4. Experienced in Nonconformance Investigations and Root Cause Analysis.
    5. Assisted with ensuring that all measuring devices used in any areas of the plant are properly.
    6. Calibrated and maintained and that records are properly kept.
    7. Implemented corrective and preventive actions when necessary in order to improve and/or enhance the quality of the product and services provided.
    8. Assisted with ensuring that all safety procedures are followed throughout the plant.
Years of Experience
Experience
5-7 Years
Experience Level
Level
Executive
Education
Education
GED


Mechanical Inspector/Analyst Resume

Headline : Experience in Customer Service, Quality Assurance, and Training. Developed, implemented, and managed corrective actions and preventive actions, customer complaints.

Skills : CNC Operator, Quality Assurance Inspector.

Description :

    1. Programmed and operated Brown & Sharpe CMM using PC DMIS software.
    2. Determined methods or sequences of operations needed to fully inspect parts.
    3. Measured, examined, and tested completed parts to check for defects and ensure conformance to specifications, using precision measuring instruments.
    4. Calculated dimensions and tolerances, using micrometers, calipers, stick micrometers, bore gages, thread gages, and other precision measuring instruments.
    5. Generated and analyzed inspection reports to ensure the customer's acceptance criteria is met.
    6. Reported all findings to the plant managers and internal and external customers.
    7. Collected, recorded, and maintained full traceability on materials, hardware, inspection instruments, and outside processing for each order.
Years of Experience
Experience
5-7 Years
Experience Level
Level
Executive
Education
Education
Diploma

Mechanical Inspector/Representative Resume

Summary : Experienced human services professional seeks to continue a successful career helping children and families through difficult situations to using strengths-based, family focused methods.

Skills : Critical Thinking, Organized.

Description :

    1. Hired on as the single designated Inspector.
    2. Possessed a broad Toolmaking background, a high percentage of that work is also undertaken.
    3. Specialized machine work deemed out of scope to the three actual Toolmakers.
    4. Consequently each day is filled with duties, tending a job shop of more than twenty-five operators.
    5. Moderated amount of punch press work, and machining of features in all the above.
    6. Engaged with tasks between the first article to PPAP.
    7. Verified a variety of vendor articles to couple with our production items.
    8. Interspersed with inspection or dedicated 100% until completion, in charge of all operations to produce the tool.
Years of Experience
Experience
7-10 Years
Experience Level
Level
Management
Education
Education
AA

Mechanical Inspector/Executive Resume

Headline : Gather the requirements, research possibilities, test and modify until the best solution is discovered.

Skills : Lathe Machines, Technical Skills.

Description :

    1. Responsible for first article inspections, Using go-no-go gauges, calipers, height gauges, and Coordinate Measurement Machines.
    2. Verified machined parts to engineering drawings using geometric dimensioning and tolerance, per customer and Raytheon Missile System requirements.
    3. Assisted in the development and monitoring processes and final inspection systems.
    4. Maintained records of all receiving and shipping inspections of purchased materials, components, and sub-contracted services.
    5. Maintained quality records of performance, investigations, and documents for deviations from prescribed standards.
    6. Inspected received parts and materials to ensure quality approval before being stocked in the warehouse.
    7. Reviewed returned parts from the customer to aid in the corrective action resolution process.
Years of Experience
Experience
5-7 Years
Experience Level
Level
Executive
Education
Education
Diploma

Mechanical Inspector/Co-ordinator Resume

Summary : Primary objective is to become a Quality Control technician or a Mechanical Engineer. Ability Summary have a broad knowledge in working with tight tolerances in the Aerospace.

Skills : Ability to use Height gages, Organized.

Description :

    1. Performed internal and exterior inspections on the container and using compressors to check for chassis damage.
    2. Extensive walked, climbed into and out of intermodal equipment(includes containers which are approximately 4 feet of the ground, use of body strength.
    3. Knowledge of all loaded and unloading procedures from and to railcars.
    4. Performed federal duties including greasing chassis.
    5. Inspected and assembled hydraulic and electrical parts for the manufacturing of utility cranes.
    6. Performed inspection for lift cylinders, buckets, tools, pedestals, turrets, and basic hydraulic systems.
    7. Performed fabrication as needed.
Years of Experience
Experience
7-10 Years
Experience Level
Level
Management
Education
Education
Diploma

Mechanical Inspector I Resume

Objective : Established training and work experience to further knowledge and career to grow and advance in the oil field business.

Skills : Technical Skills, Management.

Description :

    1. Performed visual inspection using ISO's & P&ID's to verify specifications and design criteria are met.
    2. Production field welded during assembly of LNG modules under construction.
    3. Assisted personnel with quality and code compliance.
    4. Walked down and sell individual modules with the Shell Client Representative on a final visual.
    5. Audited welders to WPS performing GTAW, GMAW, and SMAW processes.
    6. Ensured supports are welded per construction drawings and visually accepted per D1.1.
    7. Generated detailed NCR reports on defects that arise during the assembly process to Supervision in a timely manner.
    8. Reviewed weld/ heat map for proper traceability to complete documentation.
Years of Experience
Experience
2-5 Years
Experience Level
Level
Junior
Education
Education
Diploma

Lead Mechanical Inspector Resume

Headline : Looking to obtain a management position in manufacturing or quality assurance using skills and experience in high tech manufacturing.

Skills : Project Management, Critical Thinking.

Description :

    1. Qualified of incoming and outgoing parts and materials in a fast-paced inspection environment.
    2. Measured methods and practices to measure, inspect, and release materials in accordance with customer and company procedures.
    3. Detailed First Article Inspections (AS9102) reports and record keeping.
    4. Performed mechanical inspection of finished machined parts throughout the machining process from the first piece to final inspection.
    5. Material Reviewed Board (MRB) authorization and final disposition authority.
    6. Interfaced procedures and practices between companies and vendors.
Years of Experience
Experience
5-7 Years
Experience Level
Level
Executive
Education
Education
Accounting

Associate Mechanical Inspector Resume

Headline : Supervisory and implementation experience in Finance experience of managing regular and ad-hoc teams Proven track record in organizing and coordinating big high-profile event.

Skills : Management, Technical Skills.

Description :

    1. Measured equipment, calipers, micrometers, height gages, gage pins and thread gages, and a Zeiss CMM.
    2. Performed first article inspections on all part ran across all three shifts.
    3. Performed P-PAPS on all new products as required by any customers.
    4. Performed incoming inspections on all products as required.
    5. Worked with engineering and management to update and improve part prints.
    6. Worked with the machine operators on inspection methods and data collection.
    7. Continually worked with engineering to reduce all non-conforming material produced on all shifts.
    8. Retrained operators, and improving machining practices.
Years of Experience
Experience
5-7 Years
Experience Level
Level
Executive
Education
Education
Diploma

Asst. Mechanical Inspector Resume

Headline : Mechanical inspectors closely inspect electrical, plumbing, mechanical, and other systems.

Skills : Analytical Skills, Critical Thinking,

Description :

    1. Inspected parts for nuclear submarines to prints and NAVSEA specifications.
    2. Disassembled, cleaned, and calibrated all gauges used by all company personnel.
    3. Received inspection for material and certifications as required.
    4. Check soldering and molding of electrical inserts. Do electrical resistance and conductivity tests.
    5. Verified certified mill test reports to Fed and Mil Specs.
    6. Inspected incoming surgical devices to blueprints, customer documents, and company specifications.
    7. Utilized tools such as micrometers, calipers, comparators, and other gages to measure dimensions and record data.
Years of Experience
Experience
5-7 Years
Experience Level
Level
Executive
Education
Education
Electronics

Mechanical Inspector Resume

Headline : Mechanical Engineer with experience interning overseas in mechanical maintenance and corrective maintenance teams, as well as organizing manufacturing bills of materials.

Skills : Welding, Coating, Pipeline Installation.

Description :

    1. Verified that the gaskets and faces of the flanges were correct and defect-free.
    2. Verified the inside of the pipe was clean and free of debris.
    3. Verified/ documented the certifications on the manual and hydraulic torque wrenches.
    4. Witnessed/ verified the gaskets were properly installed.
    5. Witnessed that the bolts were torqued in the correct sequence and at the correct amount of pressure on each rotation.
    6. Monitored/ documented all HDPE piping installation.
    7. Verified pipe shoes and their pads were installed correctly.
    8. Verified piping turn-over dossiers were correctly signed off and in order.
Years of Experience
Experience
5-7 Years
Experience Level
Level
Consultant
Education
Education
High School