The main job purpose of a Metal Mechanic is to install, alter, and repair sheet metal products and equipment ducts and hoods for HVAC systems utilizing blueprints, work orders, and drawings. A well-drafted Metal Mechanic Resume mentions the following duties –planning and coordinating tasks and amount of material required for the performance of work; preparing and implementing equipment based on need, power saws, drill presses, hand and power shears, pan and box brakes, lock formers, cleat benders; coordinating and assembling ducts, hoods, and other sheet metal products, assembling and installing for conformance with specifications, and providing direction and technical guidance to less-experienced workers.
Hiring employers prefer to hire those with the following skills and abilities – experience should be related specifically to assembling hoods and sheet metal air-conditioning and heating units; proven working knowledge and experience in the ability to read and interpreter blueprints accurately; experience in providing quality, professional customer-related services; and the ability to handle disruptions in stride with professionalism. A degree is commonplace among job applicants.
Summary : Seeking a dynamic Metal Mechanic position that provides challenges where I can utilize my work experience and education to contribute to the success of the company. Fabricating, installing, and maintaining in good repair sheet-metal components of the airframe. Removing, cleaning, reinstalling, or replacing defective parts, accessories, and components such as gear boxes, couplings, and fittings; bad actuators, accumulators, gauges, sections of corroded fuel and oil lines, worn cable pulleys, and burned-out lights, using hand tools.
Repaired less extensive and severe damage to the metal bodies of general purpose and heavy mobile equipment.
Fabricated minor parts for the repair of cabs, cowls, aprons, doors, bodies, hoods, and other components.
Polished and smoothed metal by use of electric grinders, sanders, files and other and and power tools of the trade such as an operated impact wrenches, handbrakes, cutters, hammers, and dollies, etc.
Used hand tools such as wrenches, screwdrivers, hammers, etc.
Performed and installed simple trim work such as mirrors, handles, latches and other items such as door and windshield glass, glass regulators, weather seals, etc.
Performed a variety of manual welding processes such as gas and arc welding processes to weld parts made of commonly used metals.
Repaired items such as braces, brackets and hangers, etc.
Experience
10+ Years
Level
Senior
Education
GED
Metal Mechanic Resume
Summary : Metal Mechanic with 9 years of experience in Adjusting components such as cable tension and seat movement settings and adjustments. Obtaining standard parts such as fuel and oil line connections and fittings, cable linkage and harnesses by referring to parts manuals and by making comparisons with samples.
Skills : Mechanical Skills, Aircraft.
Description :
Completed a sheet metal performance demonstration.
Comprehended documents such as safety rules, operating maintenance instructions and procedure manuals.
Used hands to grasp, handle, and/or feel, reach with hands and arms, talk, and hear.
Frequently stand, walk, stoop, kneel, squat, crawl, twist, and work on or in the aircraft.
Frequently lifted and/or pushed or pulled up to 25 pounds and occasionally lift and/or push or pull up to 50 pounds.
Occasionally sit, climbed, and balance.
Performed repetitive movements and work overhead.
Experience
7-10 Years
Level
Executive
Education
GED
Metal Mechanic Resume
Summary : Metal Mechanic is Experienced in solving recurring problems through determination of root cause. Maintaining neat and orderly conditions where you work and promote safe conditions. Familia ring with various sheet metal types and sizes. Measuring appropriate size of sheet metal. Reading and understanding basic drawings, sketches and written requirements.
Skills : Planning, Drawing.
Description :
Worked in a safe and efficient manner while maintaining a clean, FOD-free work area.
Properly used, handled and disposed of hazardous materials, and toxic or caustic chemicals per Government regulations and company procedures.
Planed, layed out, fabricated, assembled, installed, and repaired sheet metal parts, equipment, and products by performing the following duties.
Read and interpreted blueprints, sketches, or project specifications to determine sequence and methods of fabricating, assembling, and installing products, materials, and equipment required to complete project to which the mechanic is assigned. Selects appropriate materials and method of installation, according to project specifications.
Laid out and marked dimensions and reference lines on material to develop and trace patterns of product or parts, or uses templates.
Set up and operates fabricating machines, tools, and equipment as necessary to promptly and accurately complete installation of work.
Installed work according to blueprints and in conformance with specifications.
Experience
7-10 Years
Level
Management
Education
MS
Metal Mechanic Resume
Headline : Metal Mechanic with 7 years of experience in Replacing and repairing damaged components, uses hand tools, gauges, and tests equipment. Troubleshooting malfunctions in aircraft structure, landing gear, flight surfaces and controls, anti-icing, pneudraulic, engines, auxiliary power unit, and ventilation and heating systems. Mechanic repairing, replacing, and rebuilding aircraft structures, such as wings and fuselage, and functional components including rigging, surface controls, and plumbing and hydraulic units, using hand tools, power tools, machines, and equipment such as shears, sheet metal brake, welding equipment, rivet gun, and drills.
Skills : Equipment Welder, Planner.
Description :
Worked with project manager and field superintendent to ensure that work is installed according to schedule and that quality is maintained.
Designed, and made complex templates for production machinery and building repair.
Designed, laid out, fabricated, assembled, constructed and install sheet metal items and systems of a square, rectangular, tapered and cylindrical shape or a combination of these basic shapes.
Performed structural steel fabrication where innovation is required to meet critical close tolerances and strength that must withstand extreme operational conditions and comply with safety requirements.
Managed a wide variety of activities at the same time.
Worked cross functionally and collaboratively with many stakeholders.
Identified root cause of any losses.
Experience
5-7 Years
Level
Executive
Education
GED
Metal Mechanic Resume
Headline : Metal Mechanic is repairing, replacing, and rebuilding equipment and engine components, fuel systems (including cells, tanks and fuel/metering control systems), and functional components using hand tools, power tools, welding equipment, rivet gun, and drills. Reading and interpreting maintenance manuals, service bulletins, technical data, engineering data, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components.
Skills : Planning, Drilling.
Description :
Actively participated in all plant safety programs, depending on location.
Notified department supervisor if proper tools are not furnished to complete job functions.
Communicated with clarity and demonstrate excellence in approach to work and people activities.
Picked up trash on plant property, painting, cutting/pulling weeks, operate the water and/or dump truck, moving empty and loaded trailers as required using the yard truck.
Filed paperwork, assisting with inventory counts, data entry, quality analysis/equipment calibrations, and equipment monitoring/inspections.
Installed special functional and structural parts in devices.
Followed policies and procedures, responds to management direction.
Experience
5-7 Years
Level
Executive
Education
MS
Metal Mechanic Resume
Objective : Metal Mechanic is Replacing or repairing worn or damaged components, alternators, fuel controls, fuel pumps, oil pumps, and engine mounted gearboxes, and compressor bleed valves using hand tools, gauges, and testing equipment; removing engine from aircraft, using hoist or forklift truck, disassembling and inspecting parts for wear, cracks, security, or other defects, and repairing or replacing defective engine parts and reassembles and installs engine in aircraft.
Skills : Production Toolbox, Planning.
Description :
Properly cared for and maintain company owned property, i.e. tools, equipment and material are properly secured and locked or on job site at the end of each day, etc.
Assisted Extrusion Associate with troubleshooting and correcting quality related line problems.
Completed accurately and legibly all paperwork.
Observed health and safety practices when handling bacon strips/die tear-offs.
Maintained production toolboxes and line setup supplies.
Used assigned timecard daily to accurately record time worked.
Attended weekly shift meetings and/or monthly plant meetings, if required.
Experience
2-5 Years
Level
Executive
Education
MS
Metal Mechanic Resume
Objective : Metal Mechanic is Performing preflight, thru-flight, and post-flight maintenance inspections, performs miscellaneous duties to service aircraft, including flushing crankcase, cleaning screens and filters, greasing moving parts, and checking brakes.
Skills : Service Aircraft, Installation Assistant.
Description :
Adhered to all safety regulations and policies.
Worked as part of the team to meet man hour goals for each job.
Completed required related instruction as outlined in the Apprentice training program and participate in other formal and informal training opportunities as required by the company.
Communicated appropriately with supervisor regarding job issues, requests for sick or vacation leave or other job related matters.
Participated in any required meetings.
Demonstrated acceptable skill progression throughout the apprenticeship program in the areas of orientation, installation, water systems, special joints, welding, plumbing maintenance and repair, job layout and trade servicing. (add sheet metal competency areas).
Assisted with jobs or tasks within the company as necessary to adjust for work flow changes.
Experience
2-5 Years
Level
Executive
Education
MS
Metal Mechanic Resume
Objective : Metal Mechanic with 3 years of experience in Performing the jacking and towing of aircraft, enters in the maintenance records description of the work performed and ensures the work was performed satisfactorily, may service engines and airframe components at line station making repairs, short of overhaul, required to keep aircraft in safe operating condition, may specialize in work, repair and modification of structural, precision, and functional spare parts and assemblies, and may specialize in engine repair.
Skills : Planning, Lead Mechanic.
Description :
Read and understood all production specifications, blueprints and wiring diagrams required.
Recorded required data neatly and accurately.
Arrived at the job site on time and leave at the end of the designated work day.
Followed company policies as outlined in the employee handbook and through performance and appearance reflect positively on your profession and the company.
Followed instructions of the Lead Mechanic on the job site.
Performed all work correctly and accurately demonstrating conscientious, superior workmanship according to BBI standards.
Performed work according to current codes.
Experience
2-5 Years
Level
Executive
Education
GED
Metal Mechanic Resume
Objective : Metal Mechanic is Keeping machinery, equipment, and plant structure in operating condition to support production. Such plant equipment includes battery manufacturing equipment of all types and plant utilities. Adhering to all safety standards including the wearing of Personal Protective Equipment (safety glasses, hearing protection, gloves, respirator).
Skills : Planning, Manufacturing Skills.
Description :
Fabricated and repaired with sheet metal, plastic, or wood as needed.
Created work orders, and enter data on work orders for labor hours, materials, failure and cause codes, document what was done and what remains to be done.
Completed tasks on time or notifies appropriate person with an alternate plan. Prioritizing and plans work activities.
Strived to increase productivity
Added, subtracted, multiplied and dived in all units of measure, using whole numbers, common fractions, and decimals.
Computed rate, ratio, and percent.
Used word processing software, spreadsheets, email and internet.
Experience
2-5 Years
Level
Executive
Education
MS
Metal Mechanic Resume
Objective : Metal Mechanic is Diagnosing and repairing a wide variety of machines, equipment, and systems to restore and sustain intended function, productivity, and quality. Mechanical equipment includes structure, enclosures, controllers, actuators, sensors, utilities, and communication. May using replacement parts or make replacement parts as required.
Skills : Planning, Productional Skills.
Description :
Used test equipment for troubleshooting, problem solving, equipment status, and performance.
Maintained and install piping, fittings, valves, gauges, conduit, junction boxes, power, control, and communication cables.
Adjusted machines for production when adjustment is beyond scope of the operator.
Installed new equipment or modifies existing equipment, including power, control and utilities.
Used hand tools and common machine shop tools. May be required to set up and operate the following machines: lathe, milling machine, drill press, grinder, power saws, welder, etc., and improvise where equipment is limited.
Performed preventive, corrective, predictive, and condition monitoring activities. Ability to follow written instructions, specifications, and schematics, then document findings and actions.
Creating an account is free and takes five seconds.
You'll get access to the PDF version of this resume template.
Choose an option.
Sign up with Google
Sign up with Facebook
Sign up with Linkedin
This helps us make sure you're human and prevents spammers from abusing our services.
By continuing, you agree to our Privacy Policy and Terms.
Unlock the Power of Over 10,000 Resume Samples.
Take your job search to the next level with our extensive collection of 10,000+ resume samples. Find inspiration for your own resume and gain a competitive edge in your job search.
Get Hired Faster with Resume Assistant.
Make your resume shine with our Resume Assistant. You'll receive a real-time score as you edit, helping you to optimize your skills, experience, and achievements for the role you want.
Get Noticed with Resume Templates that Beat the ATS.
Get past the resume screeners with ease using our optimized templates. Our professional designs are tailored to beat the ATS and help you land your dream job.
