Millwright Helper Resume Samples

A Millwright Helper assists the Millwright in installation, dismantle, and moving of machinery, equipment, and conveyors. Other daily tasks are listed on the Millwright Helper Resume as – erecting scaffolding; nailing together forms and mixing cement for machine foundation, moving materials, using lift trucks, drilling holes; measuring, cutting, and installing hangers using hand tools and ladders; installing and dismantling machines and equipment using crowbars, chain falls wrenches, and hoists; and performing other helper duties.

The most sought-after skills for this post include the following – proficiency in visualizing layouts by looking at plans; hands-on experience in installing, moving, and aligning stationary industrial machinery; competency at operating hoisting and lifting devices; and mechanical aptitude. Formal education beyond a high school diploma or GED is not needed. However, a diploma or vocational school training enhances job prospects.

 

Millwright Helper Resume example

Millwright Helper Resume

Summary : Milwright Helper with 9 years of experience, troubleshoot and diagnose faults, tune equipment, ensure adequate control, and security measures are established and enforced.

Skills : Millwright Helper, Machine Operator, Management Experience.

Description :

    1. Attached loads to rigging to provide support or prepare them for moving, using hand and power tools.
    2. Attached pulleys and blocks to fixed overhead structures such as beams, ceilings, and gin pole booms, using bolts and clamps.
    3. Cleaned and dressed machine surfaces and component parts.
    4. Dismantled and store rigging equipment after use.
    5. Fabricated, set up, and repair rigging, supporting structures, hoists, and pulling gear, using hand and power tools.
    6. Manipulated rigging lines, hoists, and pulling gear to move or support materials such as heavy equipment, ships, or theatrical sets.
    7. Signal or verbally direct workers engaged in hoisting and moving loads to ensure the safety of workers and materials.
    8. Adjusted, connected, or disconnected wiring, piping, tubing, and other parts, using hand or power tools.
    9. Adjusted, maintained, and repaired tools, equipment, and machines, and assist more skilled workers with similar tasks.
Years of Experience
Experience
7-10 Years
Experience Level
Level
Management
Education
Education
HS


Millwright Helper Resume

Objective : Seeks to obtain a full-time position that will allow utilizing organization skills, customer service background, and ability to work well with people, to grow as a professional. Also, to obtain employment in an industry that allows for personal and professional growth.

Skills : SmartPlant 3d, Designer, Administrative Support.

Description :

    1. Replaced defective parts of the machine or adjust clearances and alignment of moving parts.
    2. Connected power unit to machines or steam piping to equipment, and test unit to evaluate its mechanical operation.
    3. Repaired and lubricated machines and equipment.
    4. Positioned steel beams to support bedplates of machines and equipment, using blueprints and schematic drawings, to determine work procedures.
    5. Inserted shims, adjust the tension on nuts and bolts, or position parts, using hand tools and measuring instruments, to set specified clearances between moving and stationary parts.
    6. Moved machinery and equipment, using hoists, dollies, rollers, and trucks Assemble machines, and bolt, weld, rivet, or otherwise fasten them to the foundation or other structures, using hand tools and power tools.
    7. Laid out mounting holes, using measuring instruments, and drill holes with a power drill.
Years of Experience
Experience
2-5 Years
Experience Level
Level
Junior
Education
Education
HS


Millwright Helper Resume

Objective : NCCER Core and Millwright level 1 certified Millwright helper with over a year in the trade, 3 years in the industry, searching for a company that ensures higher standard and a managed procedure.

Skills : Power and Hand Tools, Painting Tools, Microsoft Office, Microsoft Dynamics, Machine Servicing Welding, Mig/Flux core.

Description :

    1. Installed machinery and heavy equipment.
    2. Dismantled machines.
    3. Moved machinery and equipment.
    4. Read and used blueprints and manuals.
    5. Replaced worn and defective parts.
    6. Used hoists and jacks, hand tools, power tools, welding equipment, plumb bobs, and measuring equipment.
    7. Tested units for proper working order.
Years of Experience
Experience
2-5 Years
Experience Level
Level
Junior
Education
Education
AAS in Industrial Technology

Millwright Helper Resume

Objective : Talented Associate with a successful career history of closing sales, increasing customer satisfaction, and mentoring junior sales professionals. Reliable professional with over 8 years of experience focused on quality completion of all lab procedures and phlebotomy under tight deadlines. Works well under pressure.

Skills : Microsoft Office, Windows, Customer Service.

Description :

    1. Worked directly from blueprints, patterns, sketches, and specifications.
    2. Developed an effective preventative maintenance schedule for all shop equipment.
    3. Studied blueprints, work instruction, sketches, drawings, and manuals to determine dimensions and tolerances.
    4. Demonstrated expertise in the use of cable reels, stripping tools, voltage detectors, crimping tools, and wire and cable cutters.
    5. Completed tear-down of existing structures and prepared for new construction.
    6. Prepared and cleaned construction sites by removing debris.
    7. Loaded and unloaded building materials used for construction.
    8. Applied caulk, sealants, and other agents to installed surfaces.
Years of Experience
Experience
2-5 Years
Experience Level
Level
Junior
Education
Education
GED

Millwright Helper Resume

Objective : Seeks to gain experience, qualifications, and education necessary for employment and advancement in a career where one may exemplify skills for career progressions and to the best of ability.

Skills : Millwright, Ironworker, Pipefitter, Welder.

Description :

    1. Performed walk-downs throughout the plant and observes machinery, equipment, and operating procedures to identify potential hazards and Safety Concerns.
    2. Followed Conduct of Operations.
    3. Built Scaffolds and perform carpenter tasks as aligned by work requests and management direction.
    4. Decontaminated objects by cleaning with soap and solvents.
    5. Carried out decontamination procedures to ensure the safety of workers and self.
    6. Identified objects contaminated by exposure to radiation, such as trash, workers, clothing, discarded tools, and equipment.
    7. Decontaminated work area, using a brush, soap, and water.
    8. Cleaned building floors by sweeping, mopping, and vacuuming them.
Years of Experience
Experience
2-5 Years
Experience Level
Level
Junior
Education
Education
Diploma in General Studies

Millwright Helper Resume

Objective : Dependable worker bringing experience and a willingness to take on added responsibility to meet tight deadlines. Enthusiastic team player with a strong work ethic and advanced complex problem-solving.

Skills : Conflict Resolution, Quick Learner, Multi-Tasking, Team Player,& Deadline-Oriented.

Description :

    1. Logged detailed and thorough records of maintenance performed.
    2. Lubricated equipment as and when needed.
    3. Bolted up fixtures, iron, and machines Prepped work area Signed tools in and out Used various hand tools and power tools.
    4. Assisted Journeyman with installation, moving & dismantling of machines & conveyors.
    5. Erect scaffolding Furnished tools, materials, and supplies to other workers.
    6. Cleaned activities or repair of tools, machines, and equipment Mixed cement for machine foundation Moved materials using a lift truck.
    7. Operated scissor lift Cut and installed hangers for overhead conveyor.
    8. Participated and learned about the maintenance and reliability services.
Years of Experience
Experience
0-2 Years
Experience Level
Level
Entry Level
Education
Education
HS Diploma

Millwright Helper Resume

Objective : Seeking to obtain a highly motivating Millwright Helper position where one can maximize strengths, skills, and knowledge in which one can effectively use expertise as a Millwright Helper and advance in Millwright.

Skills : Line Shaft Repair, and Rebuild, Conveyor Replacement, MIG and Stick Welding, Hard Working, Fast Learning.

Description :

    1. Followed direction from the millwright to gather up tools and help in the process of the pump and motor alignments using specific measuring tools and gages.
    2. Helped in the inspection of the bearing and bearing houses using a borescope and other measuring tools.
    3. Used hand tools to assist in the completion of the turbine and all rotating equipment on the job.
    4. Followed print to set and level the equipment to the specification on the print.
    5. Helped with the layout of the equipment.
    6. Followed instructions from the millwrights and upper management to help with any assigned duty.
    7. Followed all safety rules as posted.
Years of Experience
Experience
2-5 Years
Experience Level
Level
Junior
Education
Education
Basics

Millwright Helper Resume

Objective : Looking to obtain a career in the Millwright/ Maintenance field utilizing strengths, skills, and knowledge gained through previous work experience and recent education.

Skills : Warehouse, Waxing, Buffing, Stripping Floors.

Description :

    1. Assisted millwright journeyman and complete assigned tasks.
    2. Set modules and equipment on coordinates.
    3. Installed packing/catalyst in towers.
    4. Performed precision alignments on pumps and motors.
    5. Performed routine upkeep on motors.
    6. Checked motors for correct rotation and run-in.
    7. Worked orders like hydraulic cylinders needing to be replaced with fabricating and welding parts for machines.
Years of Experience
Experience
2-5 Years
Experience Level
Level
Junior
Education
Education
Diploma

Millwright Helper Resume

Objective : Pursuing a career in the field of welding as a full-time welder while completing a degree. Seeking to obtain a position with an established company that encourages professional achievements and presents challenging opportunities for growth; contributing dedication to excellence and natural talent for the trade.

Skills : Painting, Hydro Blasting, Run All Powertools Pneumatic, Electric, and Hydraulic, Industrial, and Commercial Carpentry.

Description :

    1. Fired watch, confined space, assisted in setting up new boilers and driers.
    2. Installed safety showers, motor, and tanks.
    3. Did preventative maintenance on motors that were installed and in the warehouse.
    4. Assisted other workers in installing equipment properly and safely.
    5. Ensured that workers were safe in confined space and that there were no fires.
    6. Measured, cut, and installed hangers, using handtools and ladders.
    7. Installed and dismantled machines and equipment, using crowbars, chain falls, hoists, and wrenches.
Years of Experience
Experience
2-5 Years
Experience Level
Level
Junior
Education
Education
Certificate of Secretarial Science

Millwright Helper Resume

Objective : Millwright Helper with 5+ years of experience, work in a manner consistent with the measures and procedures required by the occupational health and safety act and Polybrite safety rules and regulations, and to use or wear the protective equipment devices required by the company.

Skills : Forklift Operator, Safety, Quick Learner.

Description :

    1. Fixed and changed seals, pumps, glycol, oil, pots, help rebuild bad pumps, clean and change drum line.
    2. Changed chains and putting new rollers add grease to almost all pumps.
    3. Drilled holes at the bottom of the pump so we can align it.
    4. Selected and inspected appropriate slings for a lift using proper ratios.
    5. Determined the proper Hitch to be used and use proper techniques.
    6. Selected and inspected appropriate hardware and lifting equipment.
    7. Demonstrated the proper use of all hand signals.
Years of Experience
Experience
2-5 Years
Experience Level
Level
Junior
Education
Education
Instrumentation