Roller Operator Resume Samples

A Roller Operator undertakes the job of operating the roller by using roller or drums to compress and compact dirt, aggregate, or blacktop. Key duties that are listed on the Roller Operator Resume indicates the following duties – safely operating the roller to compress, blacktop to achieve the specified grading and smooth surface; reading grade stakes and working with grader checker; determining the speed and direction of the roller; working closely with the other crew member using hand signals; performing daily inspections and maintenance; keeping roller clean and preparing equipment for transport, and maintaining cleanliness and safety at the job site.

To complete the job, these operators need the following skills – physical strength to stand and work for a long time, the ability to lift and carry heavy items of at least 60-90 pounds; constant alertness, knowledge of operating stationary equipment, and the potential to climb on and off heavy mobile equipment safely. A high school diploma or GED is preferred.

 

Roller Operator Resume example

Roller Operator Resume

Headline : Roller Operator with 2 years of experience in operating a roller to compact dirt and/or gravel on the job site. and also operating a tractor/water truck as needed.

Skills : Communication Skills, Time Management Skills.

Description :

  • Performed all required pre-operational checks prior to operating roller.
  • Safely operated roller as instructed by foreman or lead.
  • Supported full plant-wide compliance with safety rules to further our goal of 0 accidents and encouragement of reporting and correcting near misses.
  • Adhered to SOPs and other work procedures as required to assure product quality and consistency to our customers.
  • Identified high-risk safety/productivity issues and help to remedy them.
  • Encouraged employees to look for ways to improve safety and production processes. 
  • Maintained rollers to obtain the proper operating conditions and specifications.
Years of Experience
Experience
5-7 Years
Experience Level
Level
Executive
Education
Education
High School diploma


Roller Operator Resume

Objective : As a Roller Operator, responsible for maintaining the flow rate of products going down the packaging lines by using the appropriate controls. and also responsible for checking the quality of the products going through the roller.

Skills : Customer Service, Attention to detail.

Description :

  • Operated equipment used for applying asphalt, concrete, or other materials to road beds or similar surfaces.
  • Manipulated the levers, depresses pedals, turns handwheel, and pushes the throttle to control and guide a machine in an effort to create the smoothest and most level asphalt possible.
  • Determined speed and direction of the machine, based on knowledge of compressibility of material under changing temperatures, so that ridges are not formed by excessive pressure.
  • Monitored tank temperatures and roller temperatures to ensure that product is maintained at the correct settings and proper operating parameters.
  • Monitored size, thickness, and appearance of flake to meet the specifications as well as rate requirements.
  • Maintained operator logs, documenting the condition of the rollers, flake specification, and any variance or compliance with standards.
  • Identified high-risk safety/productivity issues and help to remedy them.
Years of Experience
Experience
2-5 Years
Experience Level
Level
Junior
Education
Education
Diploma In Education


Roller Operator Resume

Summary : Roller Operator with 2 years of experience in operating machines to spread, smooth, level, compact Asphalt, and gravel to job specifications. Drives heavy rolling machines to compact earth fills. Responsible for Moving levers depresses pedals, turns handwheels, and pushes the throttle to control and guide machine.

Skills : Customer Service, Machine Operation.

Description :

  • Performed core drilling for further testing, to compare cores' compaction to lab tests throughout the day's production.
  • Logged core location by the use of survey markers to establish a position in the day's production.
  • Conducted Traffic Control to meet State and Federal standards, through signing rural roads and interstates.
  • Communicated with the flake room to warn of any problems that may occur.
  • Completed wash-down/change over procedures and documentation including filter and magnet samples.
  • Maintained, kept clean, and neat without foreign materials present which may become a possible product contaminant.
  • Complied with all plant GMP’s. Performed any and all tasks assigned to you by a member of the GFGB management team, provided that the task is approved by your supervisor.
Years of Experience
Experience
7-10 Years
Experience Level
Level
Management
Education
Education
BS In Welding

Roller Operator Resume

Headline : As a Roller Operator, responsible for Operating a roller machine behind the paving machine to obtaining the proper density and finish texture at worksites. To operate the roll machine, using roller work instructions and knowledge of steel properties to roll cans.

Skills : Maintenance Skills, Attention to detail.

Description :

  • Operated brake press, forklift, plasma cutter, oxy cutter, and overhead crane.
  • Controlled the rolling rate and performance.
  • Maintained Remelt Systems equipment and product in remelt tanks.
  • Used of basic measuring instruments, micrometers, and Clippers.
  • Used of machine control units SPC & process monitoring systems.
  • Operated heavy equipment of various sizes and weights, safely and efficiently.
  • Followed all company policies and OSHA/MSHA regulations for safe working procedures and environment.
Years of Experience
Experience
5-7 Years
Experience Level
Level
Executive
Education
Education
GED

Roller Operator Resume

Objective : Roller Operator with 5 years of experience in performing a variety of tasks that will include having to lift heavy objects, bend under potentially adverse field conditions. Safely operate and maintain power rollers compacting soil, treated soil, stone, or asphalt

Skills : Customer Service, Physical Stamina and Strength.

Description :

  • Operated and maintained a forklift truck in a safe and efficient manner.
  • Executed daily pre-trip and post-trip inspections and documentation in compliance with DOT guidelines and company policies.
  • Shaped and built roads using large construction equipment.
  • Documented daily equipment inspections and submitted daily inspection forms to the supervisor.
  • Performed daily maintenance to the machine cab and wheels.
  • Operated equipment safely and efficiently at all times.
  • Listened to warning alarms and responded accordingly.
Years of Experience
Experience
2-5 Years
Experience Level
Level
Junior
Education
Education
Associate's In Welding

Roller Operator Resume

Summary : Roller Operator with 5 years of experience in checking the rollers every week for any possible defects in the machines themselves, as well as cleaning out a dumpster and washing off plastic curtains and responsible for keeping their areas picked up daily.

Skills : Operating The Roller, Forklift, Customer Service.

Description :

  • Reported any problems to the Foreman, Superintendent, Safety Manager, or Human Resources Manager.
  • Followed direction of Foreman as to daily tasks and expectations for each specific project or Jobsite.
  • Performed minor servicing and maintenance of equipment; referred major problems to the supervisor.
  • Performed daily pre-and-post inspections with appropriate documentation in compliance with company policies.
  • Assisted in training less-experienced employees on the proper operations, servicing, and repair of equipment to further their abilities.
  • Regulated and predictable attendance at assigned times is required.
  • Able to operate equipment safely and efficiently under a variety of working conditions.
Years of Experience
Experience
7-10 Years
Experience Level
Level
Management
Education
Education
Certificate In Welding

Roller Operator Resume

Summary : As a Roller Operator, responsible for maintaining the flow rate of products going down the packaging lines by using the appropriate controls and also responsible for checking the quality of the products going through the roller.

Skills : Fork Lift, Attention to Detail, Analytical skills.

Description :

  • Operated equipment used for applying asphalt, concrete, or other materials to road beds or similar surfaces.
  • Concreted machine operator, asphalt paving machine operator, screed operator, asphalt raker, broom operator, and roller operator.
  • Manipulated the levers, depresses pedals, turns handwheel, and pushes the throttle to control and guide a machine in an effort to create the smoothest and most level asphalt possible.
  • Determined speed and direction of the machine, based on knowledge of compressibility of material under changing temperatures, so that ridges are not formed by excessive pressure.
  • Monitored tank temperatures and roller temperatures to ensure that product is maintained at the correct settings and proper operating parameters.
  • Monitored size, thickness, and appearance of flake to meet the specifications as well as rate requirements.
  • Maintained operator logs, documenting the condition of the rollers, flake specification, and any variance or compliance with standards.
Years of Experience
Experience
7-10 Years
Experience Level
Level
Management
Education
Education
Diploma In Education

Roller Operator Resume

Headline : Motivated and highly productive Operating professional with a research background. Detail-oriented with strong skills in multi-tasking and efficient management of day-to-day office operations. Adept at building and maintaining effective working relationships with co-workers.

Skills : Effective Communication Skills, Management Skills.

Description :

  • Operated the finish roller for the company.
  • Established best practices to maximize density incentives on projects.
  • Required to be a team player and work closely with other members to achieve strong results.
  • Operated water trucks to refill the equipment.
  • Inspected, cleaned, maintained, and repaired equipment, using mechanic's hand tools, or report malfunctions to supervisors.
  • Operated equipment safely and efficiently.
  • Maintained reliable attendance, meeting company standards, and maintained a positive attitude.
Years of Experience
Experience
5-7 Years
Experience Level
Level
Executive
Education
Education
High School Diploma

Roller Operator Resume

Objective : Results-driven, achievement-oriented, and self-directed management professional, highly effective diagnosing key issues and solving complex operating problems within multi-agency, and rapidly growing fast-paced rolling environments. 


Skills : Machine Operator Microsoft Word Forklift Operation, Customer Service.

Description :

  • Checked plate edge prepping.
  • Used blueprints to proactively identify parameters to form a job.
  • Adjusted equipment settings according to different materials and how they take pressures.
  • Used one of the roll machines to roll tower cans, understanding the pinch pressure process.
  • Operated Roller Partially tended Laser Operations Minor CNC work Utilized Tapping and Deburring machinery Helped create a new product flow system.
  • Repaired one and two-lane state highways, also worked as a laborer on paving crew, different counties.
  • Operated heavy and complex equipment requiring skill and the exercise of independent judgment.
Years of Experience
Experience
2-5 Years
Experience Level
Level
Junior
Education
Education
High School Diploma

Roller Operator Resume

Objective : Roller Operator with 5 years of experience in checking the rollers every week for any possible defects in the machines. To operate a self-propelled machine with either steel drums or solid rubber wheels for compacting hot mix asphalt.

Skills : Operating The Roller, Management Skills.

Description :

  • Reported any problems to the Foreman, Superintendent, Safety Manager, or Human Resources Manager.
  • Followed direction of Foreman as to daily tasks and expectations for each specific project or Jobsite.
  • Performed minor servicing and maintenance of equipment; referred major problems to the supervisor.
  • Performed daily pre-and-post inspections with appropriate documentation in compliance with company policies.
  • Assisted in training less-experienced employees on the proper operations, servicing, and repair of equipment to further their abilities.
  • Operated equipment safely and efficiently under a variety of working conditions.
  • Rolled and smoothed out the road to make it safe to drive on.
Years of Experience
Experience
2-5 Years
Experience Level
Level
Junior
Education
Education
Certificate In Welding