Controls Technician Resume Samples

A Control Technician is a professional who is responsible for handling quality assurance, product assurance, and examining data during the development process. Even though the product may vary from company to company, the job description for this post will remain the same. Some key duties listed on the Controls Technician Resume are – diagnosing and repairing complex control systems, providing assistance to sketch engineering drawings and modifications, ensuring safety at the workplace, providing guidance on electronic operating control systems, reading and understanding mechanical plans and drawings and documenting work procedures.

The summary of skills commonly found on successful resumes is – basic understanding of the company’s codes and regulations, operational knowledge of electronic control systems, proficiency with MS Office Suite, and the ability to follow safety rules and regulations. This position necessitates the applicants to have at least an engineering degree in the relevant fields.

 

Controls Technician Resume

Objective : Skilled maintenance technician/programmer with twenty-four years' experience in the installation, maintenance, troubleshooting and repair of industrial automated machinery.

Skills : HVAC Technician

Description :

    1. Serves as a communications troubleshooter contracted by the Pentagon Building Management Office.
    2. Conducts operational testing of new and modified systems.
    3. Performs preventive maintenance on various types of equipment, to include fan coil units, induction units.
    4. Installs new systems, perform major , modifications, troubleshooting, diagnostics, and major repairs to existing systems.
    5. Installs pre-engineered software, checks out control systems, start-up and commission systems and performs functional performance tests.
    6. Coordinates with Building Operations Command Center (BOCC) to facilitate positive solutions to complaints from building clients in a timely manner.
    7. Fine-tunes the control loop on air handler units by manipulating the PIB, integral time, and error and to achieve the correct temperature set point to within one degree.
Years of Experience
Experience
2-5 Years
Experience Level
Level
Executive
Education
Education
Associate In Aviation


Controls Technician III Resume

Headline : Draw on past experiences in a technical/mechanical environment, and the ability to organize people, resources and processes to achieve positive, team-oriented results.

Skills : Bending, System Instillation check out and commission, Understanding schematics/blueprints.

Description :

    1. Use machine prints, sketches, schematics, diagrams, safety codes, manuals, and manufacturer's handbooks for troubleshooting, building, repairing, etc.
    2. Troubleshoots, maintains, modifies and replaces all types of electrical components.
    3. Uses various measuring and testing equipment to troubleshoot, modify, repair electrical circuits and electrical equipment.
    4. Serve as a center of expertise and assistance for Maintenance Technicians and Manufacturing Engineers in maintaining production equipment.
    5. Assist during startups and breakdowns on Electrical/Electronic/Controls issues.
    6. Troubleshooting, design and modification of Electrical/Electronic Equipment to include PLC's, PC's, Servos, Robots and various other control devices.
    7. Assist Engineers and Manufacturing personnel in logic of machine programming and debug.
    8. Investigate, analyze, and evaluate assembly and welding station controls, make modifications as needed and feedback information design, etc.
Years of Experience
Experience
5-7 Years
Experience Level
Level
Executive
Education
Education
Electronics Engineering Technology


Controls Technician II Resume

Headline : A position in Maintenance or Engineering in an environment that will challenge my imagination and problem solving skills. Training and procedure development Project development and scheduling Equipment reliability improvement Commissioning of new equipment Process improvements.

Skills : AC & DC Drive Technician, PLC Apprentice Technician, Robotics Apprentice Technician, Team Oriented and Can Work Unsupervised, Determined to Complete Task at Hand, and Able to Learn Quickly.

Description :

    1. Troubleshoots, maintains, inspects, modifies and repairs heating, ventilation systems, air conditioning systems and equipment.
    2. Implements and facilitates the Energy Management System (EMS) and HVAC controls and Indoor Air Quality.
    3. Writes, debugs, codes analyzes and enhances programs to balance energy management with comfort control.
    4. Evaluates preliminary mechanical design plans and specs for remodels, upgrades or new construction.
    5. Monitors work done by outside contractors for adherence to state and federal Code Requirements and reports back to supervisor.
    6. Ability to read and interpret engineering and architectural plans and specifications.
    7. Practical knowledge of engineering methods and techniques.
    8. Extensive knowledge of construction practices, methods, techniques, costs, materials, and equipment.
Years of Experience
Experience
5-7 Years
Experience Level
Level
Executive
Education
Education
Bachelor Of Science

Controls Technician I Resume

Summary : To obtain a challenging position in a growth oriented company. Knowledgeable in autocad, Programmable logic controls, Able to generate electrical schematics, Trouble shoot to component level.

Skills : Forklift experience, Ability to read electrical.

Description :

    1. Commission DDC, front-end workstations and servers, and electric controls.
    2. Supervise and inspect installation of DDC control system components.
    3. Start-up and checkout controlled equipment for proper operation.
    4. Ability to write programs to carryout a given sequence of operations for controlled equipment, and create detailed and animated graphics to show the functionality of a system.
    5. Commissioning of systems to ensure proper functionality and compliance with sequence of operations.
    6. Ability to use installation or as-built drawings and documentation where possible to troubleshoot systems.
    7. Develop and maintain a cooperative working relationship with the company's team of managers, engineers and technicians, the client and other consulting engineers.
    8. Maintain personal accessibility through phone and email.
Years of Experience
Experience
7-10 Years
Experience Level
Level
Consultant
Education
Education
Bachelor's In Physics

Controls Technician/Consultant Resume

Summary : To ensure that the installment, maintenance, troubleshooting and repair of HVAC components and systems are done effectively and with minimal hassles.

Skills : Fabrication, Print Reading, Machine Maintenance, Electrical, Programing, Safety.

Description :

    1. Building a new Titanium tubing mill to upgrading safety systems on existing mills.
    2. Work with VLC, RS Logix, Control Logix, Factory Talk, Mitsubishi, PicPro and DSM programming software.
    3. Work with Device Net, Ethernet, and Profibus communication systems.
    4. Maintenance Technician grade 5 Install, build, modify, and maintain the equipment necessary to manufacture stainless steel tubing and pipe.
    5. Tasked with the daily support of production, which includes emergency maintenance of equipment as well as monthly and yearly preventative maintenance as scheduled.
    6. Skills used Allen Bradley micrologix plc integration and wire termination for loop-powered control devices.
    7. Build and integrate control panels for water re-use applications.
Years of Experience
Experience
10+ Years
Experience Level
Level
Senior
Education
Education
Industrial Maintenance

Industrial Controls Technician Resume

Summary : To effectively contribute and develop proficient results, in an ET/IT position, for a true productive environment.

Skills : Inventory Analysis, PM And Work Order Database Management, Various Certifications.

Description :

    1. Designed metering and controller equipment utilized for various usage.
    2. In-house involvement was from design to shipment.
    3. Various low voltage circuitry, solid-state controls in multi-phase systems signaled with array lines.
    4. Ran QC, point to point and troubleshoot various issues with the equipment prior to shipment, or within a warranty repair aspect.
    5. Head of the trainer and demonstration unit department, which consisted of portable units that field and classroom settings utilized in many industries.
    6. QC our vast cabling and harnesses department that was produced to enable controllers to communicate out of the house fluidly.
    7. Completion of control systems for hydraulic fracking and James Hardie board water treatment process.
Years of Experience
Experience
10+ Years
Experience Level
Level
Senior
Education
Education
Bachelor Of Science

Lead Controls Technician Resume

Headline : Currently exploring the possibility of obtaining a position as a Controls Technician, in a challenging environment. Provided opportunities for growth and advancement. As well as a place can utilize experience and skills toward becoming a valuable team member.

Skills : Providing diagnostics or repair services on climate control systems.

Description :

    1. Controls Tech Supports all customers through thorough understanding of equipment, systems and business risk mitigation at mission critical facilities.
    2. Proactively responds to potential equipment issues.
    3. Diagnoses and repairs complex control system malfunctions requiring extensive knowledge of a variety of electronic or digital controls systems and ability to test and write modifications in multiple languages of systems software.
    4. Provides solutions to very complex control system problems by troubleshooting.
    5. Manages assigned work to meet professional and efficient execution, of time and customer satisfaction.
    6. Provides energy related recommendations for customers.
    7. Consults with the customer as a result of data gathered and site assessments.
Years of Experience
Experience
5-7 Years
Experience Level
Level
Executive
Education
Education
Diploma

Associate Controls Technician Resume

Summary : Seeking position as Project Technician where can use skills on HVAC Controls and Building Management Systems.

Skills : Laser/Punch Turret Setup Operator, Adept robot training.

Description :

    1. Developed control database based on mechanical specification.
    2. Startup and test different control devices based on control design specifications.
    3. Developed campus controls logic for building and campus applications.
    4. Developed Building Management Systems User Interface based on Niagara Framework.
    5. Trained in software engineering with Niagara software (AX, R2).
    6. Software engineering includes general project management, Field controller programming (Schneider Electric I/A Series Controllers using Workplace Tech), engineering network controllers (ENC/UNC).
    7. Training provided by Automatic Controls Engineering (Schneider Electric Partner).
Years of Experience
Experience
7-10 Years
Experience Level
Level
Management
Education
Education
Bachelor Of Science

Controls Technician/Electrician Resume

Headline : Seeking a career in the industrial or services industries where knowledge of electrical troubleshooting, hardworking, and unyielding commitment to process improvement can effectively contribute to the successful and profitable operation of the company.

Skills : Microsoft office, Microsoft excel, Soldering, rs logix 500, multisim.

Description :

    1. Daily duties include maintaining and keeping the production floors running in top-performing order.
    2. Getting pass down information from the previous shift's controls technician as to what controls issues may have arisen that day.
    3. Addressing issues with PLC glitches, I/O cards analog card troubleshooting.
    4. Logging on to Allen-Bradley 500 software via Ethernet or directly into CPU.
    5. Replacement of proximity sensors, limit switches or any other input device.
    6. Replacing output devices like solenoids, valves electric and air actuated.
    7. Replacement of VFD or changing parameters for new motors. 
    8. The calibration on RTD and pressure sensors tied into the production process.
Years of Experience
Experience
5-7 Years
Experience Level
Level
Executive
Education
Education
Bachelor Of Science

Controls Technician/Supervisor Resume

Summary : Conscientious and organized individual with exceptional time management ability. Personable team player with superior communication and interpersonal skills.

Skills : Microsoft office, Microsoft excel, Soldering, rs logix 500, multisim.

Description :

    1. Troubleshooting of PLC programs and all I/O associated with the conveyor.
    2. Program PLC enhancements for conveyor as needed.
    3. Troubleshoot barcode scanners, perform preventative maintenance on barcode scanners, and replace barcode scanners as needed.
    4. Troubleshoot print and apply machines, perform preventative maintenance, and assist production with any issues related to performance of print and apply systems.
    5. Assist maintenance technicians with troubleshooting of mechanical devices, electrical motors, and any electrical device on the conveyor systems.
    6. Perform routine preventative maintenance on control panels.
    7. Including all high voltage and low voltage devices located within the control panel.
Years of Experience
Experience
10+ Years
Experience Level
Level
Senior
Education
Education
Bachelor Of Science

Controls Technician/Coordinator Resume

Objective : Experience in system installation for HVAC, monitoring and control including individual systems and devices, inter-connection, systems programming including graphical development for user interface.

Skills : Microsoft Office, High Voltage, Low Voltage, PLC, PAC, HMI, SCADA, Distributed Controls System DCS, Cotnrols, Cotnrols, Instrumentation.

Description :

    1. Ran and terminated wires for energy management controls.
    2. Programmed Controls to control HVAC equipment to the customers desired temperature.
    3. Interacted with the customer to fulfill all expectations.
    4. Created and updated AutoCAD drawings for both submittals and asbuilts.
    5. Ran Cat5E cabling to Rack and terminated Energy Management Controls to Server for remote access for the customer.
    6. Keep up with hours for the workweek and submitted them weekly to office staff.
    7. Keep company vehicle clean and washed Accomplishments Successfully completed dozens of projects to the customer's satisfaction.
    8. Skills Used Strong communication abilities Efficient wire pulling abilities Strong work ethic.
Years of Experience
Experience
2-5 Years
Experience Level
Level
Junior
Education
Education
Diploma

Controls Technician Resume

Summary : Experience mostly on the install side of building automation such as pulling wire, installing and terminating devices, building panels, installing and replacing thermostats, running conduit, braiding and saudering, changing components on residential and commercial equipment, minor troubleshooting preventive maintenance and service.

Skills : Microsoft office.

Description :

    1. Installing and terminating Honeywell, Distech, LonWorks, and Prolon controllers.
    2. Installing and terminating pressure and temperature sensors.
    3. Installing and terminating thermostats and zone stats and relays.
    4. Installing dampers, damper actuators and got and chilled water actuators.
    5. Installing power supplies and transformers.
    6. Installing cameras, card readers, Motion sensors, glass break sensors, door strikes and meg-locks for security and access control.
    7. Reading blueprints, product literature, and job scopes.
Years of Experience
Experience
7-10 Years
Experience Level
Level
Consultant
Education
Education
Diploma