Equipment Maintenance Technician Resume Samples

Description :

1. Performed scheduled preventative maintenance services on all mechanical systems equipment and components.
2. Replaced worn components before the mechanical breakdown occurred.
3. Maintained preventative maintenance logs on all equipment and systems.
4. Developed a parts replacement file containing all components of all systems that are presently in use with all necessary data.
5. Assisted other maintenance personnel, when required, and directed their use in emergency repairs involving mechanical systems.
6. Maintained and took a periodic inventory of parts, materials, and components as directed.
7. Cross-trained other personnel in a visual and sound inspection of equipment to gain a timely reporting response to systems troubleshooting.

Experience

5-7 Years

Level

Executive

Education

Masters

Description :

1. Read the processed sheet and set up a manual to determine the test program required and setup specifications.
2. Inserted test probe card in wafer probe equipment.
3. Inserted floppy disk or magnetic tape into a slot on test equipment and pushes buttons on the test equipment or types commands on a keyboard to enter the test program.
4. Placed sample wafer from specified wafer lot on test equipment chuck, using vacuum and tweezers.
5. Observed the wafer through a microscope attached to wafer probe equipment and turns knobs on equipment to align and position wafer circuit under probe card.
6. Activated test equipment to make a trial run to ensure the correct equipment set up and informs the equipment operator that set up is complete.
7. Removed and sharpens worn probes, using hand tools and burnishing blade.

Experience

5-7 Years

Level

Executive

Education

Electronics

Description :

1. Ran diagnostic tests for the tester units. Maintain spare parts inventory.
2. Reported directly to the maintenance manager on any and all maintenance concerns, including repairs, parts, and supplies. 
3. Conferred with operators and observed tests and evaluated the operation of machinery and equipment to diagnose the cause of the malfunction.
4. Disassembled machinery and equipment to remove parts and make repairs. Inspected parts for defects, such as breakage, or excessive wear.
5. Repaired, replaced, adjusted, and aligned components of machinery and equipment.
6. Cleaned and lubricated parts, tested runs, repaired machinery, and equipment to verify the adequacy of repair.
7. Responsible for repair to all equipment in the facility Responsible for schedule and performance preventive maintenance.

Experience

10+ Years

Level

Senior

Education

Automotive

Description :

1. Responsible for equipment repair, maintenance, and conversions.
2. Provided equipment modifications and installations while monitoring effectiveness.
3. Identified and corrected deviations from accepted practice or expectations, ensuring quality control.
4. Communicated directly with Engineers, Supervisors, and Technicians, which ensured timely critical information was delivered in a timely manner.
5. Provided and received pass downs which consistently met fast-paced production schedules.
6. Participated in weekly production meetings which ensured key information was exchanged.
7. Shared knowledge/experience with other team members which led to continuous Improvement.

Experience

5-7 Years

Level

Executive

Education

Associate Of Applied Science

Description :

1. Performed scheduled preventive maintenance. Performed repairs on all Probe equipment in a timely manner.
2. Coordinated maintenance activities with production supervision to enable production to meet their goals.
3. Provided verbal and written pass on information to oncoming shift technicians at shift change.
4. Assisted Equipment Engineering with equipment installs and de-installs Equipment Maintenance Technician.
5. Operated all Background equipment and process all production lots to meet production goals.
6. Coordinated maintenance activities with production supervision to enable production to meet their goals.
7. Provided verbal and written pass on information to oncoming shift technicians at shift Change.

Experience

10+ Years

Level

Senior

Education

BS

Description :

1. Performed equipment maintenance at four Google offices. Member of the Google Video Conference SME Team.
2. Provided outstanding customer service and basic hardware troubleshooting.
   
3. Maintained an inventory of accessories and assets.
4. Performed repairs and preventive maintenance on High Reach Equipment Kept records of repair and maintenance of equipment.
   
5. Contracted to perform repairs, maintenance and preventive maintenance on CNC production equipment.
6. Reviewed performance statistics and make recommendations for operational and equipment improvements.
7. Scheduled, planned and coordinated Preventative and Corrective maintenance efforts.

Experience

7-10 Years

Level

Management

Education

Bachelor Of Science

Description :

1. Responsible for mechanical and electrical repairs of automated production equipment, including screen printers, pick and place, insertion.
2. Performed preventive maintenance and calibration on a scheduled basis using Datastream tracking software.
3. Programmed and program debug using equipment manufacturer's software.
4. Assisted process engineers in process development and debug.
5. Performed operator training and certification. Calibration and repair of torque assembly drivers.
6. Participated in continuous improvement activities, such as Kaizens and SGA's (small group activity).
7. Performed repairs and preventive maintenance on High Reach Equipment Kept records of repair and maintenance of equipment.

Experience

7-10 Years

Level

Management

Education

Associate In Applied Science

Description :

1. Coordinated daily department activities in order to maximize equipment utilization and support production needs.
2. Established preventative maintenance schedules. Generates maintenance logs and other operations metrics.
3. Forecasted operating costs of the department and directs the preparation of budget requests.
4. Reviewed and establishes material, equipment, and manpower resource requirements.
5. Coordinated maintenance activities with other functional groups such as engineering and operations.
6. Selected and developed personnel to ensure the efficient operation of the departmental function.
7. Administered safety programs in order to provide a safe and clean workplace for employees.

Experience

10+ Years

Level

Senior

Education

Information Systems

Description :

1. Provided upgrades and replacements for malfunctioning or dated hardware.
2. Monitored trouble ticket queue and route tickets amongst team members.
3. Managed Video Conference room inspections/resets, and Tandberg testing/troubleshooting.
4. Setup new hires with computer and accessory equipment and collected and restocked equipment for exit employees.
5. Managed CDB host records, update, delete and modify and created new corp hosts for Windows machines via Terminal.
6. Telecom supported with Avaya desk phones configuration and telephone deployment.
7. Resolved customer issues using the ticketing system and meet the service level agreement.

Experience

5-7 Years

Level

Executive

Education

Certification

Description :

1. Performed electrical and mechanical troubleshooting.
2. Dismantled, adjusted, repaired, and assembled equipment in order to perform P.M.
3. Emergency repaired when problems arose.
4. Assisted the engineering dept with R&D problems. Performed gas bottle/tank replacement when needed.
5. Responded to any hazmat/emergency problems that came up.
6. Performed preventive maintenance, diagnostics and repairs on all production equipment.
7. Worked on vacuum, electro-mechanical, pneumatic, hydraulic and RF systems.

Experience

5-7 Years

Level

Executive

Education

BS

Description :

1. Repaired all downed machines in Stack Manufacturing.
2. Created preventive Maintenance instructions for toolsets and documents.
3. Executed and tracked preventive maintenance schedules.
4. Reviewed the spares inventory and ensures replenishment.
5. Troubleshoot electrical and Eurotherm errors.
6. Programmed Watlow controller for temperature.
7. Responsible for the repair of all equipment. Maintained spare parts inventory.

Experience

2-5 Years

Level

Junior

Education

Business Management