Metal Framer Resume Samples

A Metal Framer is responsible for preparing equipment and selecting suitable metal studs for securing frames and tracks. The job duties commonly listed on the Metal Framer Resume indicate the following – studying construction specifications to determine the installation requirements and procedures; preparing equipment and tools, measuring and cutting metal runners, studs, and furring channels to required sizes; installing horizontal and vertical metal studs to frames; measuring and cutting drywall boards onto the frames; cutting tidy openings into boards for electrical outlets, vents, and fixtures; supervising general construction workers as needed, and ensuring compliance with construction industry-specifications and safety standards.

To ensure success in this field, the following skills and abilities are needed – solid knowledge of fasteners, such as studs, nails, screws, and anchors; keen attention to detail, experience in overseeing general construction workers; and solid knowledge of construction industry safety specifications and regulations. A high school diploma or GED is mandatory. Apprenticeship or training in the field of the construction industry is as well needed.

 

Metal Framer Resume example

Metal Framer Resume

Summary : To obtain Metal Framer employment where my skills and abilities can be utilized and the opportunity to grow is available.

Skills : Basic electric, Plumbing, Carpentry, drywall, Framing.

Description :

    1. Verified conformance of workpieces to specifications, using squares, rulers, and measuring tapes.
    2. Aligned and fit parts according to specifications, using jacks, turnbuckles, wedges, drift pins, pry bars, and hammers.
    3. Moved parts into position, manually or with hoists or cranes.
    4. Positioned, aligned, fit, and weld parts to form complete units or subunits, following blueprints and layout specifications, and using jigs, welding torches, and hand tools.
    5. Studied engineering drawings and blueprints to determine materials requirements and task sequences.
    6. Set up and operated fabricating machines, such as brakes, rolls, shears, flame cutters, grinders, and drill presses, to bend, cut, form, punch, drill, or otherwise form and assemble metal components.
    7. Examined metal stock or workpieces to be processed to ensure that specifications are met.
    8. Moved materials and finished products, using large cranes.
Years of Experience
Experience
7-10 Years
Experience Level
Level
Management
Education
Education
High School Diploma


Metal Framer Resume

Objective : To obtain a Metal Framer position with an organization that will provide the opportunity for professional growth and personal development.

Skills : Adobe Creative Suite, Microsoft Office.

Description :

    1. Developed, implemented and maintained various manufacturing plans, Bill of Materials, work instructions and illustrations to define and document as-built configuration.
    2. Assisted with development and integration of suppliers, processes, materials, data and technology to meet manufacturing and delivery requirements.
    3. Assisted in reviewing supplier data to ensure manufacturing related requirements are met. Identifies tooling requirements and initiates tooling orders based on manufacturing and engineering requirements.
    4. Assisted in tooling dispositions.
    5. Investigated and resolved manufacturing related issues of limited scope.
    6. Assisted with producibility assessments for part or product designs.
    7. Assisted in providing input to design, manufacturing processes and manufacturing technologies to meet cost and schedules.
            Years of Experience
            Experience
            0-2 Years
            Experience Level
            Level
            Entry Level
            Education
            Education
            9 Th Grade


            Metal Framer Resume

            Summary : Over 3 years of experience with metal stud framing applications. Prospective candidates must be able to provide a high quality product, read and understand drawings, and work as a team to maintain production.

            Skills : Drywall Hanger, Painting, Metal Framer, Carpentry, Warehouse.

            Description :

              1. Cut metal or wood framing and trim to size using cutting tools.
              2. Installed horizontal and vertical metal or wooden studs to frames so that the wallboard can be attached to interior walls.
              3. Measured and mark surfaces to lay out work, according to blueprints or drawings using tape measures, straightedge or squares, and marking devices.
              4. Removed existing plaster, drywall, or paneling, using crowbars and hammer.
              5. Cut and screwed together metal channels to make the floor or ceiling frames, according to plans for the location of rooms or hallway.
              6. Developed work statements and sequencing of events to support delivery commitments.
              7. Assisted in the review, maintenance and monitoring of internal documents.
                Years of Experience
                Experience
                7-10 Years
                Experience Level
                Level
                Management
                Education
                Education
                High School Diploma

                Metal Framer Resume

                Summary : As a Metal Framer and Drywaller, will be responsible for working within the framework of a team. Hang drywall on walls and ceilings, cutting to fit.

                Skills : Proficient in MIG, TIG, stick for steel, SS, and Aluminum.

                Description :

                  1. Studied and interpreted assembly instructions.
                  2. Fabricated and assembled structural metal products.
                  3. Read and interpreted blueprints and sketches.
                  4. Interpreted measurements.
                  5. Operate equipment, including but not limited to lathes, mills, drill press, press-breaks, shears, and cutting tables.
                  6. Assembled and installed metal framing.
                  7. Read blueprints and other specifications to determine method of installation, work procedures, and material and tool requirements.
                    Years of Experience
                    Experience
                    7-10 Years
                    Experience Level
                    Level
                    Management
                    Education
                    Education
                    High School Diploma

                    Metal Framer Resume

                    Summary : Metal Framer prepare metal studs for designated purposes, secure wall frames, and drywall the framed sections.

                    Skills : Experience with PDM, CAPP or CMES.

                    Description :

                      1. Patched drywall to remove any seams and fill gaps.
                      2. Supported activities at all Applied Medical facilities and job-sites, as directed.
                      3. Lay out reference lines and points, compute position of framing and mark position through the use of a chalk line.
                      4. Suspended angle iron grid and channel iron from ceiling.
                      5. Installed metal or wood studs horizontally and vertically for wallboard attachment with the use of hand tools.
                      6. Catted metal or wood framing, angle and channel iron, and trim to size, with the use of cutting tools.
                      7. Fabricated box headers and king stud assemblies.
                    Years of Experience
                    Experience
                    7-10 Years
                    Experience Level
                    Level
                    Management
                    Education
                    Education
                    Degree

                    Metal Framer Resume

                    Summary : As a Metal Framer, responsible for preparing equipment, selecting suitable metal studs for securing frames and tracks, and covering secured frames with drywall boards.

                    Skills : Good physical condition and stamina.

                    Description :

                      1. Used blueprints, hand and power tools to erect the frames of walls and ceilings out of lumber or other building materials.
                      2. Erected and assembled floors, walls and ceilings using the necessary equipment, tools, material and supplies.
                      3. Lay out and cut openings for windows, doors and vent areas.
                      4. Installed sheet metal panels, molding, exterior parts and accessories using hand and power tools.
                      5. Fastened panels to frame and trim to shape, using the necessary tools, equipment and materials.
                      6. Followed safety rules and regulations established by Cleveland Construction, Inc.
                      7. Followed safety protocol and OSHA regulations on a commercial job site.
                    Years of Experience
                    Experience
                    7-10 Years
                    Experience Level
                    Level
                    Management
                    Education
                    Education
                    GED

                    Metal Framer Resume

                    Summary : Extensive experience in metal stud framing and contribute expertise to team. Outstanding metal stud framers take pride in the quality of their work and are able to supervise other construction team workers.

                    Skills : Drywall, Carpentry, Framing, Metal stud, Framer.

                    Description :

                      1. Installed all framing components; tracks, studs, sheathing to specific standards
                      2. Followed and listened to specific interior and exterior framing instructions
                      3. Communicated with foreman of any immediate discrepancies for framing or sheathing
                      4. Worked well individually and in a team setting, Works safely around others
                      5. Paid attention to specific details for scope of work
                      6. Followed all safety guidelines from Suburban, OSHA and general contractor specifics
                      7. Reports any project or health hazards to foreman that may arise near immediate work area
                    Years of Experience
                    Experience
                    7-10 Years
                    Experience Level
                    Level
                    Management
                    Education
                    Education
                    High School Diploma

                    Metal Framer Resume

                    Summary : Metal Framer is to provide management oversight for all phases of commercial construction or renovation projects, including coordinating workers, material, and equipment, ensuring that specifications are being followed.

                    Skills : Drywall finishing, Drywall hanging, Finish carpentry, Rough carpentry.

                    Description :

                      1. Followed Standard Operating Procedures (SOPs) and Company programs.
                      2. Supported shrink and safety programs.
                      3. Interacted with others in an accepting and respectful manner; remains positive and respectful, even in difficult situations; promotes commitment to the organization vision and values; projects a positive image and serves as a role model for others.
                      4. Participated in the truck un-load and stocking processes to ensure truck standards are followed and completed within budget.
                      5. Operated cash register and execute cash handling to standards.
                      6. Acknowledged customers, help locate product and provide solutions.
                      7. Assisted with Omni channel processes.
                    Years of Experience
                    Experience
                    7-10 Years
                    Experience Level
                    Level
                    Management
                    Education
                    Education
                    High School Diploma

                    Metal Framer Resume

                    Summary : Extensive benefits program, dynamic team atmosphere and strong core values help create the best environment for our staff and the best service for our clients.

                    Skills : Basic computer skills and Basic measuring skills.

                    Description :

                      1. Measured, cutter and fitted drywall for installation on walls and ceilings.
                      2. Positioned and secured drywall to metal studs.
                      3. Cut and installed corner bead to corners.
                      4. Filled joints, holes and cracks with finishing compound.
                      5. Framed walls and ceilings using light gauge and structural steel studs.
                      6. Measured and marked cutting lines on framing, drywall, and trim.
                      7. Installed blanket installation in-between studs and tacks plastic moisture barrier over installation.
                      8. Assembled and installed metal framing and decorative trim for windows, doorways and vents.
                    Years of Experience
                    Experience
                    7-10 Years
                    Experience Level
                    Level
                    Management
                    Education
                    Education
                    GED

                    Metal Framer Resume

                    Summary : As a Metal Framer, trim rough edges from wall to maintain even joints, fit and fasten wallboard or sheetrock into specified position.

                    Skills : Ability to operate the framing equipment and glass cutter.

                    Description :

                      1. Studied construction specifications to determine installation requirements and procedures.
                      2. Prepared equipment and tools, including scaffolding, ladders, tape measures, straightedges, hand tools, and power tools.
                      3. Chalk lined references lines and points to level metal frames and furring channels.
                      4. Measured and cut metal runners, studs, and furring channels to required sizes.
                      5. Installed horizontal and vertical metal studs to frames to attach wallboards.
                      6. Measured, cut, fitted, and fastened drywall boards onto the frames.
                      7. Cut tidy openings into boards for electrical outlets, vents, and fixtures.
                    Years of Experience
                    Experience
                    7-10 Years
                    Experience Level
                    Level
                    Management
                    Education
                    Education
                    GED