Metrology Engineer Resume Samples

A Metrology Engineer specializes in Science/engineering-related measurements. Roles and responsibilities listed on the Metrology Engineer Resume include the following – calibrating instruments, designing new tools, and systems of measurements; interpreting data, researching the science of measuring; adjusting or redesigning measurement capability to minimize errors; developing calibration methods and techniques based on principles of measurement science, and accuracy and precision requirements; directing engineering, quality and laboratory personnel in design, and manufacture. Other core duties include –evaluating new calibration methods and procedures; using statistics to analyze measurement standards and processes; and recommending calibration standards.

Employers pick resumes highlighting the following skills and abilities – experience with physical and chemical processes and complex analytical equipment; ability to prioritize and accomplish goals, familiarity with requirements of accreditation bodies, and proficiency in providing metrology support to both pharmaceutical manufacturing and R&D areas. An Engineering degree in electrical/mechanical engineering along with calibration training is commonplace among job applicants.

 

Metrology Engineer Resume example

Metrology Engineer Resume

Summary : Highly qualified Metrology Engineer with experience in the industry. Enjoy creative problem solving and getting exposure on multiple projects, and I would excel in the collaborative environment on which your company prides itself.

Skills : Software Testing, Metrology, Operations Research, Professional Engineer.

Description :

    1. Worked with clients in the pharmaceutical industry for compliance with FDA regulations in the Metrology Department: Provide compliant procedures and method to FDA regulation in the Metrology Department.
    2. Developed and implemented corrective action plans to address deficiencies such as Non-Conformances, CAPA, and FDA 483 and Warning Letters with successful results.
    3. Developed quality policies and procedures as related to calibration.
    4. Provided assistance to the Metrology Department by reviewing new and existing calibration methodologies (technical and departmental SOP) for compliance with internal and external policies Project Planning including cost (time and material) and labor.
    5. Communicated with vendors for IM&TE calibration information.
    6. Provided engineering analysis and guidance for metrology issues.
    7. Implemented data and records requirements for metrology department information database.
Years of Experience
Experience
7-10 Years
Experience Level
Level
Management
Education
Education
B.S. In Mechanical Engineering


Metrology Engineer Resume

Objective : To obtain a position that I can use my experiences, education, and skills but also a position that will allow me to learn new skill sets and gain more understanding of manufacturing/supplier quality migration and performance management.

Skills : Solidworks, ProEngineer, AutoCAD, PC-DMIS, Quindos, MMIV, MCOSMOS CMM Manager, CAM Measure, Polyworks, Abaqus, ANSYS, FloWorks, MATLAB, MAPLE, SPSS, SAS, Minitab, SPC, Android Development, Graphic Design, Adobe Photoshop, MacOS, Windows, Linux, UNIX, iOS.

Description :

    1. Included but not limited to the following: Daily, Weekly, and Monthly reviews of temperature monitoring systems at Wright Medical locations in the U.S., Canada, and the UK that are in place for ambient temperature control of biologic product.
    2. Created and revised all applicable documentation to properly establish, implement, maintain, and sustain accessibility and compliance of temperature monitoring documentation.
    3. Supported internal and external audits including but not limited to AATB, BSI, & FDA by providing data and reports as requested in a timely manner.
    4. Ensured all temperature monitoring excursions are found, reviewed, and completed to specifications and in a timely manner.
    5. Prepared and tested new calibration procedures.
    6. Created datasheet templates for new instruments and tools.
    7. Performed capability studies on standards used for calibration of measurement and test equipment's.
Years of Experience
Experience
2-5 Years
Experience Level
Level
Executive
Education
Education
Associate Of Applied Science In Applied Science


Metrology Engineer Resume

Summary : Responsible for installing, maintaining and monitoring access control computer equipment and peripherals, the facility's alarm system, security monitoring equipment, environmental temperature chambers, A/V and UPS equipment and the building's public address system.

Skills : 3D CAD Modeling Proficiency, Microsoft Office, CMM, Automotive Manufacturing, Manufacturing.

Description :

    1. Researched and developed measurement processes, methods, and procedures for calibration of various instruments and test equipment.
    2. Performed calibration requirements analysis to determine laboratory standards appropriate to meet or exceed minimum Test Uncertainty (TUR) requirements for metrology applications.
    3. Supervised a team of calibration lab technicians and monitored the lab's compliance with quality regulations and policy.
    4. Performed data review and quality verification of calibrations performed by the lab technicians.
    5. Provided technical training and consultation on calibration methods, procedures, application of the calibration process, and various metrology machines to the lab technicians, and lab customers.
    6. Responsible for metrology equipment programming, maintenance, and technical documentation.
    7. Subject Matter Expert for CMM and Vision system technologies.
Years of Experience
Experience
7-10 Years
Experience Level
Level
Management
Education
Education
M.S. In Mechanical Engineering

Metrology Engineer Resume

Summary : To obtain a challenging and dynamic Metrology Engineer position in the engineering/manufacturing industry where I can apply and grow my technical skills in a fast-paced, cross-functional environment.

Skills : Solidworks, ProEngineer, AutoCAD, PC-DMIS, Quindos, MMIV, MCOSMOS CMM Manager, CAM Measure, Polyworks, Abaqus, ANSYS, FloWorks, MATLAB, MAPLE, SPSS, SAS, Minitab, SPC, Android Development, Graphic Design, Adobe Photoshop, macOS, Windows, Linux, UNIX, iOS.

Description :

    1. Led and organized work in the Engineering Lab in conjunction with achieving CLS department goals.
    2. Developed, maintains, and monitors a work-in-progress tracking system; setting up and tracking Return Material Authorizations (RMAs); developing technical instructions; developed a training program for engineers and technicians; ordering parts, etc.
    3. Provided engineering technical knowledge, support, and guidance across all departments at CLS, as requested.
    4. Developed rapport with on-site Nuclear Procurement Engineering Group (PEG) engineers to make clarifications and corrections on pending PEG packages possible.
    5. Communicated daily with site personnel and PEG groups, providing quality work packages for engineering lab personnel that meet customer expectations by providing quality results.
    6. Performed component dedication testing on quality-related nuclear devices and components per specific requirements as listed in the PEG package for the nuclear sites.
    7. Failured analysis on a wide range of electrical and physical components.
Years of Experience
Experience
10+ Years
Experience Level
Level
Senior
Education
Education
Bachelor Of Science In Electrical Engineering

Metrology Engineer Resume

Objective : Metrology Engineer, Imaging Scientist, Chemical Engineer with extensive experience in writing MATLAB algorithms, GUI's, tools, and Documentation in support of R&D. Specialize in remote or short-term on-site consulting for a wide range of engineering projects. Proven capabilities and customer satisfaction.

Skills : Microsoft, Labview, Mathematica, Comsol, LaTex, Linux.

Description :

    1. Provided Corporate Metrology/Calibration technical support for Abbott Lake County sites.
    2. Provided Corporate Global Metrology/Calibration technical support for Abbott sites worldwide.
    3. Upgraded Lab's capability by qualifying a Laser Micrometer thus measuring time was decreased from 30 to less than 5 sec.
    4. Designed SPRT probe holders for safe handling; also upgraded dissolution apparatus by using Agilent standards plus worked with validation department to validate the Tool-Makers microscope.
    5. Reviewed existing and wrote/rewrote new procedures then provided technical training to Technicians and Engineers to assure compliance.
    6. Utilized tools such as DOE (Design of Experiments), FMEA, Decision Focus Analysis, Measurement System Analysis, Advanced SPC, and Gage R&R ANOVA for various projects.
    7. Installed a Verifier Asphere Interferometer into manufacturing.
Years of Experience
Experience
2-5 Years
Experience Level
Level
Executive
Education
Education
Bachelor Of Science

Metrology Engineer Resume

Summary : Leading failure analysis and root-cause investigations of defects and discontinuities related to casting materials and processes, and also Developing expert level training requirements for technicians and operators depending on the equipment and processes.

Skills : Semiconductor, Metrology, Maintenance, Manufacturing, Engineering.

Description :

    1. Provided metrology and inspection support for all plants, which included the Huntsville, Al.
    2. Responsible for the calibration and certification of test measurement equipment, plus diagnostic equipment including Laboratory Standards.
    3. Audited suppliers for compliance with MIL-STD-45662a, ANSI/NCSLz540-1 19994, ISO-100012, and ISO9001/02.
    4. Analyzed metrology data and provided assessment results to the company & customers, which included statistical analysis for programs that required analysis.
    5. Built a 3.39 and 10.6 Micron dual-band interferometer as well as a 2.5-meter off-axis polychromatic MTF bench.
    6. Conducted capability studies.
    7. Designed gages and fixtures using Solidworks.
Years of Experience
Experience
7-10 Years
Experience Level
Level
Management
Education
Education
MS

Metrology Engineer Resume

Headline : To obtain a full-time Metrology Engineer position that will utilize my Electrical Engineering background with a focus on micro/nanoelectronics, systems, manufacturing, and testing.

Skills : See Additional Information, MS Office.

Description :

    1. Developed inspection routines for Coordinate measuring machines.
    2. Troubleshoot common programs written in PC-Demis & Metrology XG/Silma.
    3. Liaisoned between plant engineering and off-site programming personnel.
    4. Prioritized workload based on production/engineering needs.
    5. Worked in cross-function groups including Quality engineers, welding engineers, design engineers, machine operators, and layout inspectors.
    6. Inspected product to current GD&T standards.
    7. Worked with various product types including sheet metal, stampings, weldments, machined components, and in various stages of assembly.
Years of Experience
Experience
5-7 Years
Experience Level
Level
Executive
Education
Education
AAS In Quality Technology

Metrology Engineer Resume

Objective : Operating all types of Zeiss measuring machines including programming using Zeiss application software; setup and staging of parts; accuracy and repeatability verification; etc.

Skills : Engineering Skills, Metrology.

Description :

    1. Developed methods, either standard or unique, to perform testing and failure analysis in electronic interconnect devices.
    2. Provided reports and presentations that are thorough and well-thought-out.
    3. Assumed ownership of multiple metrology and characterization instruments at the Xperi lab. 
    4. Operated the tools, help other operators, schedule preventive maintenance, and oversee consumable inventory.
    5. Performed research on topics of interest, develop theories and prove or disprove such theories by employing appropriate characterization techniques.
    6. Used innovative approach in engineering tasks and work with the team to create novel solutions in related fields when applicable.
    7. Demonstrated solid understanding of materials physics as well as semiconductor back-end-of-line processes.
          Years of Experience
          Experience
          2-5 Years
          Experience Level
          Level
          Junior
          Education
          Education
          Associate Of Applied Science In Applied Science

          Metrology Engineer Resume

          Headline : Hardworking, organized, Metrology Engineer professional with a proven background delivering sensible business technology solutions on time and under budget while working as a team member or team leader.

          Skills : CMM Programmer, PC-DMIS, and Zeiss Calypso.

          Description :

            1. Oversaw lab operations.
            2. Participated in APQP activities and PPAPs.
            3. Participated in corrective action activities and root cause analysis.
            4. Researched and purchased equipment and train lab personnel on the proper use.
            5. Worked with customers and suppliers to develop measuring techniques and resolve dimensional issues.
            6. Programmed Brown and Sharpe Global Performance DCC CMMs with PC-DMIS using CAD models and or part prints, including offline programming.
            7. Performed, scheduled, and tracked gauge calibrations and R&R studies.
          Years of Experience
          Experience
          5-7 Years
          Experience Level
          Level
          Executive
          Education
          Education
          BS In Communications

          Metrology Engineer Resume

          Objective : Seeking a Metrology Engineer position with a company that will allow me to utilize my education in engineering and manufacturing work experiences (professional and/or technical) in a challenging team-based environment.

          Skills : Managing Skills, Writing Skills.

          Description :

            1. Designed, tested, and purchased parts for semiconductor measurement equipment.
            2. Maintained: ADE dimensional measurement and sorting equipment; E+H MX wafer geometry gauge; X-ray diffraction (XRT) meter; SPV iron measuring gauge; Nikon laser-dot and oxygen-measuring microscopes; Notch depth measuring gauge; Edge Profile edge and diameter measuring gauge; NanoSpec poly and LTO thickness (PVD) measuring gauge.
            3. Wrote calibration and PM procedures.
            4. Inspected and repaired obsolete circuit boards for gauges.
            5. Trained technicians to calibrate and repair equipment.
            6. Tested and developed processes to improve product yield.
            7. Responsible for drawing reviews of new test methods of various optics from windows to aspheres.
          Years of Experience
          Experience
          2-5 Years
          Experience Level
          Level
          Executive
          Education
          Education
          MS