Piping Design Engineer Resume Samples

Description :

1. Responsible for leading the design and development of piping layouts for [type of projects, chemical plants, refineries] using [CAD software, AutoCAD 3D].
2. Responsible for conducting stress analysis to ensure piping systems meet safety and regulatory requirements.
3. Responsible for collaborating with multidisciplinary teams to integrate piping designs into overall project plans.
4. Responsible for coordinating with vendors and participating in the selection of piping materials, ensuring compliance with project specifications.
5. Responsible for providing technical expertise during construction and commissioning phases, resolving design-related issues.
6. Responsible for contributing to the conceptualization and detailed design of piping systems, considering factors such as fluid dynamics, heat transfer, and material compatibility.
7. Responsible for collaborating with process engineers to optimize piping layouts for improved efficiency and ease of maintenance.

Experience

10+ Years

Level

Senior

Education

Bachelor's degree in Mechanical Engineering

Description :

1. Ensured that piping designs comply with industry codes, standards, and regulatory requirements.
2. Stayed informed about updates to relevant codes and standards.
3. Provided technical support during the construction phase, including responding to site queries, conducting site visits, and resolving design-related issues that may arise.
4. Implemented and adhered to quality assurance procedures to ensure that piping designs meet the required quality standards.
5. Worked towards optimizing costs associated with piping materials, fabrication, and installation without compromising safety or quality.
6. Maintained accurate and up-to-date documentation of all design-related activities, ensuring clarity and traceability of the design process.
7. Identified opportunities for process improvement in the piping design workflow.

Experience

7-10 Years

Level

Management

Education

Bachelor's degree in Mechanical Engineering

Description :

1. Led the design and development of piping layouts for industrial projects using computers.
2. Aided Design (CAD) software, ensuring compliance with industry standards and project specifications.
3. Conducted stress analysis on piping systems to ensure they meet safety and regulatory requirements, identified potential stress points, and proposed design modifications to enhance system integrity.
4. Collaborated with vendors and participated in the selection of piping materials, considering factors such as material compatibility, corrosion resistance, and cost-effectiveness.
5. Considered fluid dynamics and heat transfer principles in the design process to optimize piping layouts for efficient fluid flow and heat exchange.
6. Prepared and reviewed Piping and Instrumentation Diagrams (P&IDs) to communicate the design intent and illustrate the interconnection of process equipment and instrumentation.
7. Generated detailed isometric drawings that provide a three-dimensional representation of piping components, facilitating accurate fabrication and installation.

Experience

5-7 Years

Level

Executive

Education

Bachelor's degree in Mechanical Engineering

Description :

1. Provided design sketches and developed piping routes as per project specifications and requirements, prepared and checked piping flex packages before flex calculations, and checked 3-D PDMS modeling of piping, structure, and equipment. 
2. Met corporate and global manufacturing personnel and process safety goals.
3. Reviewed and feedback piping basic and detailed design drawings and specs completed by 3rd party or vendor.
4. Collaborated with multidisciplinary teams, including process engineers, structural engineers, and project managers, to understand project requirements.
5. Led a team of CAD designers and planned the activities.
6. Managed follow-up of modifications and relations with the other sections (layout and piping calculation mainly) and the piping team in France.
7. Implemented best practices to enhance the efficiency and effectiveness of piping design processes.

Experience

2-5 Years

Level

Executive

Education

Bachelor's degree in Chemical Engineering

Description :

1. Provided engineering design for process piping and utility piping systems in support of nuclear and non-nuclear projects at Y-12 and Pantex.
2. Cost-estimated bills of material and man-hour estimates, statements of work, design criteria, and title II engineering deliverables including preparation of calculations (equipment, valve, and pipe sizing) and analyses, construction specifications & drawings, and equipment specifications.
3. Designed systems such as potable water and fire-protection supply systems, gases, acid, and caustic fluids, brines, cryogenics, steam and condensate, hot and chilled water systems, chillers, boilers, cooling towers, and vacuum systems.
4. Performed walk-downs in the existing plant facilities to generate design documents.
5. Managed and performed various aspects of piping design including piping arrangement drawing, isometric drawing, piping list, BOM preparation, piped support drawing piping insulation standard.
6. Coordinated and communicated technical issues among various groups including the US and UK.
7. Understood AP piping engineering standards, spec, international industry piping engineering codes, and local codes.

Experience

10+ Years

Level

Senior

Education

Bachelor's degree in Mechanical Engineering

Description :

1. Conducted cryogenic piping engineering and detailed design work for assigned projects.
2. Supported project proposal estimation, project execution, manufacturing QA/QC, and as-built drawing. 
3. Initiated piping design changes as necessary.
4. Coordinated and communicated technical issues among various groups including AP  Shanghai Engineering Centers and Local Design Institute.
5. Acted as a consultant in piping/equipment arrangement engineering areas of expertise.
6. Coordinated plot plan design review meeting and related design issue tracking & closeout.
7. Designed stormwater, potable water, and wastewater pipelines and pumping stations.

Experience

7-10 Years

Level

Management

Education

Bachelor's degree in Mechanical Engineering

Description :

1. Supported on-site piping construction for technical issues and provided resolution suggestions.
2. Maintained and developed piping design work process, ensuring it is implemented appropriately.
3. Determined design strategy, Consults on engineering codes and principles.
4. Participated in project execution and commercial strategies on multiple projects.
5. Led in problem-solving on significant issues.
6. Worked closely with proposal development engineers (PDE) and commercial people to support new bidding opportunities timely and efficient.
7. Modeled hydraulics of stormwater and distribution/collection system operations.

Experience

7-10 Years

Level

Executive

Education

Bachelor's degree in Mechanical Engineering

Description :

1. Directed activities to ensure that construction, installation, and operational testing conform to functional specifications, recognized codes and standards, and client requirements.
2. Maintained effective communication, verbally and written, with project team members, regulatory agencies, and with the client.
3. Worked under minimal supervision, work is reviewed for adequacy on completion.
4. Assisted the Lead in employing cost-competitive engineering techniques to develop the most cost-effective total project solution for the execution of the discipline engineering work.
5. Performed and checked calculations, specified equipment, and solved problems of moderate engineering complexity.
6. Managed and performed various aspects of piping design including piping arrangement drawing, Isometric drawing, piping list, BOM preparation, piping support drawing, and piping insulation standard.
7. Contributed to the development of AP standards and procedures.

Experience

5-7 Years

Level

Executive

Education

Bachelor's degree in Mechanical Engineering

Description :

1. Developed, maintained, and tracked cost estimates (material and engineering work hours) for all stages of the project life cycle.
2. Effectively planned and organized work including setting priorities for Piping Engineers and
3. Designers to meet project milestones for the piping portion of capital projects provided technical piping engineering support across functions.
4. Ensured that environmental, Safety, and Loss Prevention principles were used in the design and embedded in our Global Piping Work Process.
5. Coached and mentored Engineers and Designers.
6. Traveled to sites including international locations for field verification, field measurements, field engineering, construction support, and engineering support at third-party companies.
7. Worked in a multi-discipline, multi-location, team environment with both face-to-face communication and virtual software.

Experience

5-7 Years

Level

Executive

Education

Bachelor's degree in Mechanical Engineering

Description :

1. Understood discipline interfaces and how to influence impacts to the benefit of the project.
2. Actively engaged in the maintenance of P&IDs.
3. Used coaching methods and a consultative style to guide others with problem solving and technical queries.
4. Extended the role to the wider disciplines taking responsibility for the design of the plant.
5. Shared design effort, ensuring targets are met or exceeded.
6. Provided expertise in pipe support selection and the preparation of Special Pipe Support designs.
7. Hands-on approached with responsibility for all piping design and layout in an assigned area including setting piping layout concepts, assuring quality and consistency, and ensuring that safety, operation, maintenance, and construction requirements are incorporated.

Experience

7-10 Years

Level

Management

Education

Bachelor's degree in Mechanical Engineering