Principal Piping Designer Resume Samples

A Principal Piping Designer is responsible for producing and maintaining piping deliverables in accordance with industry standards. Typical work activities associated with the post are listed on the Principal Piping Designer Resume as – assisting in preparing CTR’s and man-hour estimates, creating and responding to technical queries, carrying out site surveys both on and offshore, carrying out 3D modeling and design activities of piping systems and supports, checking detailed design drawings of piping systems and supporting in accordance with industry standards, providing technical input during detailed engineering of projects, and providing support and input into the preparation of technical files, and providing support and input into the preparation of certification documentation.

Job Knowledge and skills include – experience in the oil and gas industry, the ability to demonstrate previous experience in the use of AutoCAD 2D and 3D software, good working knowledge of piping codes and standards, and relevant offshore mandatory requirements. The job demands a relevant engineering degree from job applicants.

Principal Piping Designer Resume example

Principal Piping Designer Resume

Summary : Over 34 years of piping design experience; roles and responsibilities include Design Supervisor, Lead Designer, Checker and Sr. Designer/Drafter. Experienced in the Petroleum refining, chemical, gas transmission, and manufacturing industries. Duties including development of engineering and construction job scopes, preparation of engineering/construction estimates, design supervision and job tracking, checking, and development of PFD's, P&ID's, UFD's, Equipment Arrangement, Piping plans and Sections, Isometrics, and Pipe Spool Drawings.

Skills : Piping Design And Related, Mechanical Design, 3d Design.

Description :

    1. Designed Coordinator & Design Supervisor (all disciplines).
    2. Entired refinery designed in bolt up modules for Aeroflot air shipping, & enclosed for extreme cold weather operation.
    3. Finley leased expansion, North Midway Sunset Field, Taft, CA.
    4. Worked was for a retrofit project at DuPont Washington Works.
    5. Produced double line isometric piping circuit drawings of the entire piping system.
    6. Performed piping design on a hydrochloric acid project for DuPont / Chemours Louisville Works.
    7. Led designer on OTL12 FS2 Pipeline Renewal Project.
Years of Experience
Experience
10+ Years
Experience Level
Level
Senior
Education
Education
Bs In Engineering Technology


Principal Piping Designer Resume

Summary : Over 40 years experience in piping design and related activities. Served as client rep, design supervisor, checker, lead designer, model builder, and field liaison on projects in petro-chemical and related industries. Served as client representative to optimize piping design for a polyethylene production facility.

Skills : Bentley Plant V8i Bentley/Rebis Autoplant: 2D and 3D Piping, P&ID and Isometric CADWorx: 2D and 3DPiping, P&ID and Isometric. Advantage: Piping, P&ID and Isometric.

Description :

    1. Worked for MPG Piping Group.
    2. Assigned to various projects: Marathon, Garyville.
    3. Coordinated with Area Supervisors and Designers for a proper interface between disciplines.
    4. Duties included designing and placing pig launcher in existing facility and routing associated piping to tie-in to existing piping.
    5. Experinced working with E3D & PDMS. Producing plans and Isometrics.
    6. Able to overlay into 3D model.
    7. Experienced with Excel and Word software.
        Years of Experience
        Experience
        10+ Years
        Experience Level
        Level
        Senior
        Education
        Education
        High School Diploma


        Principal Piping Designer Resume

        Summary : Principal Piping Designer with 20+ years of experience combining technical, mechanical and design project management strengths to meet complex piping design challenges. Providing detailed drafting and design solutions utilizing multiple 3D platforms such as Bentley AutoPLANT, Civil 3D & CADPipe modeling with laser scan technology facilitating project success. Coordinating with equipment mfgr, engineering project managers & owner to provide a seamless transition between concept & construction through concise, adaptive design.

        Skills : 3D Modeling, Exreaction, Surveying, CAD Standards.

        Description :

          1. Generated working 3D models and drawing deliverables with AutoPLANT from laser scanning software, existing plant records & field surveying consisting of Plans, specifications, P&ID's & isometrics with boms along with all associated documentation for diverse process plants following strict regulatory & local guidelines working closely with project managers & lead engineers.
          2. Conducted onsite & remoted progress reviewed and field verification/inspection on diverse projects ensuring compliance to client, company & regulatory standards.
          3. Involved in all phases of projects, from man-hour estimates to deliverables and construction support.
          4. Worked across disciplines to establish company-wide CAD standards procedure, Evaluating established conventions & guidelines for consistency & cross-discipline & software compatibility.
          5. Guided subordinate team members through CAD practices & assisting in 3D model concepts & training.
          6. Led Piping designer, duties include Support front end project development, plant layout and estimating.
          7. Experienced using LFM scan data and Recap data. 
        Years of Experience
        Experience
        7-10 Years
        Experience Level
        Level
        Management
        Education
        Education
        Associate's

        Principal Piping Designer Resume

        Headline : Principal Piping Designer with over 29 years experience in managing and detail design in the following industry areas: Petrochemical/Oil Refining & Gas Processing Crude & Natural Gas Pipeline Pump & Compressor Stations, Terminals & Storage Facilities Mining/Material Processing (Pot Ash, Gold, Coal & Salt) Power Industry (Combined Cycle, Nuclear, Coal & Geo-Thermal) Nuclear/Hazardous Waste (Decontamination & Decommissioning) An asset to any project and very knowledgeable in additional engineering disciplines such as mechanical, structural, civil, electrical and instrumentation & controls with familiarity of engineering standards ANSI B31.

        Skills : Piping Department Manager, Principal Piping Designer, Lead Piping Designer, Piping Sytems, Management & Estimating, Welding/Fabrication, 3D CADD, Safety Coordinator.

        Description :

          1. Responsible for estimating, design, layout & checking projects including visits to client sites for small capital projects to define scope, tie-points, process & P&IDs.
          2. Managed design teams from 1-12 designers and drafters.
          3. Spent four months on client site managing 5-7 piping designers along with 6-8 drafters & designers from multi-disciplined team to rebuild a crude unit that was down because of a fire.
          4. Set up piping specs and followed design to help oversee construction effort for 3 1/2 months.
          5. Responsible for equipment arrangements, piping layout, design, and checking.
          6. Interfaced with client engineering and operations on site rerouting piping and creating isometrics for construction.
          7. Assigned to a grassroots vaccine facility plant for Medimmune, Inc.
        Years of Experience
        Experience
        5-7 Years
        Experience Level
        Level
        Executive
        Education
        Education
        Associate Of Applied Science

        Principal Piping Designer Resume

        Headline : Over 18 years of experience in piping engineering design using various 3D cad software like Autocad Plant 3D, Cadworx, PDS, and PDMS. Application of all engineering standards with respect to piping engineering. Working on a refinery, oil and gas facilities, petrochemical plants.

        Skills : Autocad, PDMS, PDS, Microstation, SPPID, Offices, HASS.

        Description :

          1. Reviewed specifications, drawings, material requirements, and vendor equipment documentation from both within the discipline as well as from other disciplines for compliance with project requirements and actively seek discrepancy resolution.
          2. Developed 3D CAdworx piping and equipment models.
          3. Developed 2D Piping plans and Section Details.
          4. Prepared and complete piping drawings such as; isometric, extract .c2 files for stress analysis, special pipe support details, and structural support.
          5. Interfaced with engineers and design leads from other disciplines Interface with the client and other disciplines at project meetings Ability to lead projects and supervise along with leading a team of designers and drafters Creates drawing area layout of pumps, vessels, and heat exchangers Do field survey and walkdowns.
          6. Developed and As-built P&ID's Understands and is able to layout underground piping systems as well as non-steel piping systems.
          7. Reviewed layouts and conceptual and detailed designs and fabricator drawings.
        Years of Experience
        Experience
        5-7 Years
        Experience Level
        Level
        Executive
        Education
        Education
        B.S.

        Principal Piping Designer Resume

        Summary : Over 26 years of experience in piping design and drafting: Coordinator of process diagrams: supervision of flow diagram drafting group which produced PFD, P&ID, and MFD drawings as well as logic and cause and effect diagrams. Responsible for checking of all flow diagrams, extensive interfacing with a project, process, control system, and piping leads during the development of flow diagrams.

        Skills : Proficient In AutoCad, AutoCad 3D Software, PDMS 3D.

        Description :

          1. As-built existing facility drawings.
          2. Supervised the production of piping design packages for various clients.
          3. Coordinated between various disciplines to complete final package for submitting to clients.
          4. Developed process drawings, detail piping design, plan drawings, isometrics and MTO.
          5. Insured that client standards are followed and implemented.
          6. Regularly met with client to address design package contents and status.
          7. Addressed and resolved any unforeseen problems that arise during the design and construction phase.
        Years of Experience
        Experience
        10+ Years
        Experience Level
        Level
        Senior
        Education
        Education
        MS

        Principal Piping Designer Resume

        Summary : Over 25 years of experience in piping design and checking. Using client and industry standards and specs I strive to develop designs that are safe, user friendly, and constructible. Working upstream, midstream, and arctic as well as at a variety of refineries, paper mills and chemical plants around the country has given me a wide range of experience to fall back on to achieve this goal.

        Skills : PDMS, PASCE, PDS, PDMS Draft, AutoCAD, Auto-Plant, Facet, Pro-Iso, Flexcad, Microstation, Cadpipe, Cadworx.

        Description :

          1. Checked Marlotherm area on Huls Project.
          2. Went to field on Cape field phase.
          3. Led piper on Cape Ind.
          4. Designed on Kimberly Clark Boiler house w/ compressors, water treatment, water chillers, and deaerator.
          5. Checked filter area on K.C.
          6. Designed and checked on Toray Poly Film Plant.
          7. Ensured adherence to Industry codes and standards as well as Client practices and procedures.
        Years of Experience
        Experience
        10+ Years
        Experience Level
        Level
        Senior
        Education
        Education
        GED

        Principal Piping Designer Resume

        Summary : Experienced includes 25+ years as a Senior Piping Designer, Lead Piping Designer, Principal Piping Designer, and Checker. Currently looking for new opportunities in Oil & Gas, Power, or Mining. I consider myself a working lead who can perform walk down, FEED studies, estimates, 3D modeling, Isometrics, detail design, checking, and oversee construction of process & power piping systems.

        Skills : Plant Layout, PDS, S3D, PDMS, Vessel Orientation, All Process Plant Equipment.

        Description :

          1. Responsible for estimating, design, layout & checking projects including visits to client sites for small & mid capital projects to define scope, tie-points, process & P&IDs.
          2. Worked on projects in business groups: Energy & Chemicals, Mining, and Power.
          3. Worked on upstream, midstream & downstream projects.
          4. Spent 4 months on client site to rebuild crude unit that was down due to a fire.
          5. Created piping spec's and oversaw construction effort for 3 1/2 months.
          6. Responsible for checking IFC piping ISO package.
          7. Completed 3D Piping and equipment Model as well as structural steel platform of a Unloading Facility of light and heavy oil for ALON Energy.
        Years of Experience
        Experience
        10+ Years
        Experience Level
        Level
        Senior
        Education
        Education
        MS

        Principal Piping Designer Resume

        Headline : As a Principal Piping Designer, Experienced using LFM scan data and Recap data, and also to overlay into 3D model, Experienced with Excel and Word software.

        Skills : Software Skills, Modeling Skills.

        Description :

          1. Ran Clash check reports and provide progress/design maturity on weekly basis.
          2. Supervised GID designers and attend meetings with GID (we have daily meetings in the morning).
          3. Interfaced with Client and present model in weekly Marine systems meeting.
          4. Extracted piping ISOs from E3D and Material take-offs.
          5. Applied good interpersonal skills, liaising with the client and members of other disciplines.
          6. Worked within the provisions and guidelines of the client and company Quality Assurance systems. 
          7. Complied with client specifications.
        Years of Experience
        Experience
        5-7 Years
        Experience Level
        Level
        Executive
        Education
        Education
        B.S.

        Principal Piping Designer Resume

        Summary : Responsible for Complying with all guidelines, policies, and procedures established by CCI Industrial Services and clients while on shift, on-call, or attending training.

        Skills : Designing Skills, Maintenance Skills.

        Description :

          1. Ensured all work conducted in his / her area is properly permitted.
          2. Maintained compliance with required HSE.
          3. Maintained 100% Safety Standards and Accountability in all areas or mandatory/regulatory Ensures workforce is working safely and efficiently.
          4. Ensured the resources and commit to HSE is of top priority for all employees.
          5. Related to and work with personnel in all levels of an organization.
          6. Established and maintained rapport and strong working relationship with co-workers and client.
          7. Built integrity, honesty, and trust with stakeholders, clients.
          8. Ensured safe work.
                            Years of Experience
                            Experience
                            10+ Years
                            Experience Level
                            Level
                            Senior
                            Education
                            Education
                            High School Diploma