Shop Hand Resume Samples

A Shop Hand is responsible for assisting customers and increasing customer service satisfaction levels. While the day-to-day duties may vary from shop to shop, the Shop Hand Resume describes certain core tasks that are commonly carried out – answering to inquiries, stocking shelves; helping in loading and unloading process, handling transactions, helping customers in locating products, reporting to managers, solving complaints; handling returns, stocking shelves when stock runs low, and replacing expired products with fresh stock.

As this is an entry-level position, the following skills will suffice – strong customer service skills, exemplary communication skills, physical ability to stand and work for long time, stamina to move and lift heavy items, self-confidence, passion to learn the job, the ability to work among group of workers; and resilience to stress. Formal education is not required. However, possessing a high school diploma will be useful.

 

Shop Hand - Part Time Resume

Headline : To obtain a career where the acquired skills established throughout the years in the oil field and warehouse can be utilized and to gain new knowledge. To acquire a challenging position to prove the prolific talents and skills and to be a trustworthy professional. Excellent communication including independent correspondence, good planner, self-initiator, quick learner, Co-operative and hard working.

Skills : Hauling And Backing Trailers, Forklift Operation, Painting, Some Heavy Equipment Knowledge, Landscaping.

Description :

    1. Maintain all machines, such as keep them full of coolant and water, fill oil reservoirs every morning before work begins, maintain a clean machine at all times.
    2. Shoveling out metal shavings from each machine and dumping into metal hoppers.
    3. Wiping down all machines is a must when everything was completed.
    4. Maintaining a clean work environment at all times.
    5. Sweeping all shop floors, keeping cranes up at the desired and safe height, moving parts from shop to shop and keeping finished parts on a correct rack until time to stack on pallets.
    6. Maintaining proper maintenance on each forklift such as keeping fueled up with diesel and keep a record on any malfunctioning parts of the lift and sending it to my supervisor.
    7. Hauling full hoppers from machines out and dumping in the metal recycling dumpsters.
    8. Moving pallets of finished parts and also the movement of new pieces of metal from the yard to the shop for fabrication.
Years of Experience
Experience
5-7 Years
Experience Level
Level
Executive
Education
Education
GED


Welder/Shop Hand Resume

Summary : To work in a creative and challenging environment using cutting edge technologies where one could constantly learn and successfully deliver solutions to problems & to give the optimum solution by proper use of all resources available. Seeking a suitable & responsible position as Supervisor/Charge Hand within an Organization where one can utilize their diverse experience & interpersonal skills.

Skills : Welding, Patience, Honesty, Communication

Description :

    1. Use hand tools such as screwdrivers, pliers, wrenches, pressure gauges, and precision instruments, as well as power tools such as pneumatic wrenches, lathes, welding equipment, and jacks and hoists.
    2. Inspect brake systems, steering mechanisms, wheel bearings, and other important parts to ensure that they are in proper operating condition.
    3. Adjust and reline brakes, align wheels, tighten bolts and screws, and reassemble equipment.
    4. Raise trucks, buses, and heavy parts or equipment using hydraulic jacks or hoists.
    5. Perform routine maintenance such as changing oil, checking batteries, and lubricating equipment and machinery.
    6. Test drive trucks and buses to diagnose malfunctions or to ensure that they are working properly.
    7. Examine and adjust protective guards, loose bolts, and specified safety devices.
    8. Attach test instruments to equipment, and read dials and gauges to diagnose malfunctions.
Years of Experience
Experience
10+ Years
Experience Level
Level
Consultant
Education
Education
Bachelors of Science


Valve Tech/Shop Hand Resume

Headline : Seeking a challenging career with an organization that can best utilize the skills, abilities, education and past work experience. Seeking a challenging career in your esteemed organization & looking forward to being a part of a dynamic team of highly qualified professionals & having abundant scope & recognition for hard work & sincerity.

Skills : Hauling And Backing Trailers, Forklift Operation, Painting, Some Heavy Equipment Knowledge

Description :

    1. Weld components in flat, vertical, or overhead positions.
    2. Operate safety equipment and use safe work habits.
    3. Layout, position, align, and secure parts and assemblies prior to assembly, using straightedges, combination squares, calipers, and rulers.
    4. Examine workpieces for defects and measure workpieces with straightedges or templates to ensure conformance with specifications.
    5. Recognize, set up, and operate hand and power tools common to the welding trade, such as shielded metal arc and gas metal arc welding equipment.
    6. Weld separately or in combination, using aluminum, stainless steel, cast iron, and other alloys.
    7. Clamp, hold, tack-weld, heat-bend, grind or bolt component parts to obtain required configurations and positions for welding.
    8. Select and install torches, torch tips, filler rods, and flux, according to welding chart specifications or types and thicknesses of metals.
Years of Experience
Experience
5-7 Years
Experience Level
Level
Executive
Education
Education
Bachelors of Science

Lead Shop Hand Resume

Headline : To obtain an entry-level position with a chosen organization, that will allow the skills to add to the growth of the organization, while at the same time increase the skills for advancement within the chosen organization. To work with a prestigious organization that will provide the environment to utilize effective communication and problem-solving skills. Work with a Team Environment and build solid Interpersonal relationship.

Skills : Problem Solving, Detailed Oriented, Good Leadership And Management, Excellent Communication Skills, Excellent Time And Management And Organization Skills, Construction Of Equipment.

Description :

    1. Provided general maintenance which included troubleshooting, plumbing electrical and light construction in and around the warehouse.
    2. Operating heavy machineries such as Forklifts, excavators, front end loaders and backhoes.
    3. Enforced OSHA safety regulations and safety on various trades; steam lifters plumbers, welders, insulators ext.
    4. Responsible for all the shipping and receiving of products.
    5. Control of inventory maintaining and organization of the merchandise and warehouse.
    6. Operating heavy machineries such as Forklifts, excavators, front end loaders and backhoes.
    7. Keeping the work area clean and making sure production stayed moving are common responsibilities they all shared.
    8. Worked in part manufacturing as well as overall final assembly both in a shop environment as well as in the field.
Years of Experience
Experience
5-7 Years
Experience Level
Level
Executive
Education
Education
High School

Junior Shop Hand Resume

Objective : To find a successful life-long career in an esteemed organization so that the employees may grow professionally while earning a good reputation amongst their peers. Seeking a position that will utilize the skills while offering the chance for advancement in the future.

Skills : Welding, Patience, Honesty, Communication

Description :

    1. Reassemble machines after the completion of repair or maintenance work.
    2. Start machines and observe mechanical operation to determine efficiency and to detect problems.
    3. Inspect or test damaged machine parts, and mark defective areas or advise supervisors of repair needs.
    4. Lubricate or apply adhesives or other materials to machines, machine parts, or other equipment, according to specified procedures.
    5. Install, replace, or change machine parts and attachments, according to production specifications.
    6. Dismantle machines and remove parts for repair, using hand tools, chain falls, jacks, cranes, or hoists.
    7. Collaborate with other workers to repair or move machines, machine parts, or equipment.
    8. Read work orders and specifications to determine machines and equipment requiring repair or maintenance.
Years of Experience
Experience
2-5 Years
Experience Level
Level
Junior
Education
Education
High School

Shop Hand, General Resume

Objective : Shop Hand with more than four years working for and assisting managing retail establishments. Recognized for delivering unparalleled customer service. A verifiable track record of success backed by impeccable references. Effective communicator with excellent negotiation skills, with strong leadership qualities and analytical power.

Skills : Microsoft Office, Microsoft Word, Excel, Management, Customer Service, Computer Skills.

Description :

    1. Receive and count stock items, and record data manually or using a computer.
    2. Pack and unpack items to be stocked on shelves in warehouses.
    3. Verify inventory computations by comparing them to physical counts of stock, and investigate discrepancies or adjust errors.
    4. Clean and maintain supplies, tools, equipment, and storage areas in order to ensure compliance with safety regulations.
    5. Determine proper storage methods, identification, and stock location based on turnover, environmental factors, and physical capabilities of facilities.
    6. Examine and inspect stock items for wear or defects, reporting any damage to supervisors.
    7. Provide assistance or direction to other warehouse workers.
    8. Align and secure holding fixtures, cutting tools, attachments, accessories, or materials onto machines.
Years of Experience
Experience
2-5 Years
Experience Level
Level
Junior
Education
Education
Bachelors of Science

Shop Hand/ Trainer Resume

Headline : Looking for suitable assignments in a dynamic organization having ample scope for carrier enhancement and a professional growth offering challenging task which enhances the ability & optimized potentials. Looking forward to directing the commitments towards the growth and development of the organization.

Skills : SAP, Bridge Crane Operator, Forklift Operator, Backhoe Operator, Welder, Emergency Response team.

Description :

    1. Assist in CRT and casing tong maintenance and repairs.
    2. Drive to rig locations to deliver trucks and equipment as needed.
    3. Read work orders and receive oral instructions to determine work assignments and material or equipment needs.
    4. Record the number of units handled and/or moved, using daily production sheets or work tickets.
    5. Use forklift and pallet jack to move freight, stock, or other materials to and from storage or production areas, loading docks, and/or delivery vehicles.
    6. Install protective devices, such as bracing, padding, or strapping, to prevent shifting and/or damage to items being transported.
    7. Attach slings, hooks, or other devices to lift cargo and guide loads.
    8. Maintain equipment storage areas to ensure that inventory is protected and accounted for.
Years of Experience
Experience
5-7 Years
Experience Level
Level
Executive
Education
Education
High School

Part-time Shop Hand Resume

Headline : To pursue a highly rewarding career, seeking a job in a challenging and healthy work environment where one can utilize the skills and knowledge efficiently for organizational growth. To utilize the academic skills for contribution to the organization and to develop new skills for career development and professional mission accomplishment.

Skills : Problem Solving, Detailed Oriented, Good Leadership And Management, Excellent Communication

Description :

    1. Perform PSV testing utilizing certified test equipment and complete all QA / QC documentation as required by the VR program (if skilled).
    2. Perform hands-on workshop and / or on-site disassembly, inspection, reporting, cleaning, and reassembly of valves and actuators.
    3. Machine material and / or parts with various machining equipment.
    4. Ensure work and used materials are in compliance with manufacturer specifications.
    5. Read and interpret schematics for assembly, repair, and reassembly as required including completion of applicable quality documentation in either paper or electronic form.
    6. Perform failure assessments and make recommendations to the on-site Bay Valve Service supervisor as required.
    7. Perform day-to-day and routine safety observations and inspections.
    8. Operated shear and break constantly cutting different gauge sheets of stainless metal as well as bending the sheets to make various parts.
Years of Experience
Experience
5-7 Years
Experience Level
Level
Executive
Education
Education
G.E.D

Junior Shop Hand Resume

Objective : Skilled in installation, pre-commissioning, calibration, and maintenance of all kinds of oil field mechanical equipment in oil & gas fields. Well versed in pressure relief valves, safety valves, mechanical valves, valve actuators. To upgrade the knowledge in the field maintenance at every step in the corporate ladder and thereby give the best to an organization, which can offer a challenging job commensurate with my interest and make it a win-win combination.

Skills : Welding, Forklift, Excellent Time And Management

Description :

    1. Received equipment at the company store location that required rebuild work.
    2. Tore down and disassembled each air hammer brought to our store location.
    3. Cleaned and performed precision measurements on hammers to assess whether the tool can be rebuilt and safely reused or not.
    4. Painted, prepped and reassembled air hammers to excellent working conditions.
    5. Provided feedback on the status of hammers to the supervisor and kept them informed of any issues that arose.
    6. Worked closely with peers and offer to cross-train as necessary on all relevant features of our products.
    7. Worked closely with coworkers to ensure a safe working environment and report any possible safety issues to the supervisor.
    8. Helped develop solutions to local problems. Safely and properly operate and inspect machines, vehicles, and/or engines to diagnose defects.
Years of Experience
Experience
2-5 Years
Experience Level
Level
Junior
Education
Education
High School

Lead Shop hand Resume

Summary : To be employed as a full-time employee with a job that is willing to work with an academic and military schedule. Pursuing a company that provides great work experience, environment, and a chance to progress in pay and opportunity. To work in a value-based, professionally managed, development-oriented organization, contributing to its growth by working effectively & efficiently & do the continual improvement.

Skills : Grind Metal, Cut Metal, Tag Metal Together, Monitoring & Inspecting Skills, Fire Safety, And C.P.R.

Description :

    1. Cleaned, painted and stamped serial numbers on assets to be used on the rig.
    2. Filled out work orders for assets to be repaired at machine shops and kept track when they were returned.
    3. Performed general shop maintenance and organization.
    4. Assisted coordinators by making sure we could fill their tool orders by keeping the necessary materials and equipment available.
    5. Ensured timely truck deliveries of assets to rig sites.
    6. Was responsible for entering the correct serial and part numbers and their corresponding prices for tools and motors Lost in Hole.
    7. Providing quality assurance by logging proof of inspection for tools and assets going back and forth to the job sites.
    8. Driving forklift, sky track, and other equipment as required.
    9. Accurately inspects all iron and equipment for defects, washed-out parts, etc.
Years of Experience
Experience
10+ Years
Experience Level
Level
Consultant
Education
Education
Bachelors of Science

Shop hand Resume

Objective : Intents to build a carrier with leading corporate of hi-tech & challenging work environment with committed and dedicated people which will help me to explore oneself fully and realize the potential. Excellent communication & interpersonal skills with strong analytical, team-building, problem-solving and organizational abilities.

Skills : Delivery Driver, Shipping And Receiving Class B CDL Air Brakes.

Description :

    1. Ordered and verify if items are available in stock. Pull orders from storage areas and compare them with order forms.
    2. Check products to ensure working order and quantity.
    3. Choose appropriate packing materials and containers and pack products in accordance with product safety protocols.
    4. Make sure that each container is sealed using glue or nails and are labeled with appropriate information.
    5. Load containers onto forklifts and drive them to the delivery pallet.
    6. Assist in unloading containers from the forklifts and loading them on delivery trucks or vans.
    7. Drive the delivery van to retail outlets or accompany truck driver to the destination.
    8. Move material around the facility on forklifts, loading and unloading racks with material.
Years of Experience
Experience
2-5 Years
Experience Level
Level
Junior
Education
Education
Diploma