Weaver Resume Samples

A Weaver interlaces hair strands in a prescribed sequence, using weaving fixture and sews weft. The most common work activities are listed on the Weaver Resume as follows – attaching threads of designated color and texture to rods and pegs of weaving fixture; sewing free end of a cord to end of weft with matching thread; turning pegs to tighten threads; inspecting belting and removing loose filling threads; pulling strands straight; cutting and knotting thread ends; looping the end of cord and sewing remaining seam to loop; cutting warp threads to specified length using tape measures.

The most sought-after skills for the post include the following – knowledge of cotton and thread texture; ability to calculate yarn requirements; ability to operate both conventional and modern weaving machines for making cloth and bedding; and strong knowledge of method evaluation. Relevant certification is commonly required.

Weaver Resume example

Weaver Resume

Summary : weaving are observed or watches for looms stopped by automatic stop-motion device. Threads warp through guides and heddles, over rollers and wax bars.

Skills : Artist, Marketing, Sales.

Description :

    1. Responsible for driving a reach truck to do replants for pickers, and doing put-a-ways.
    2. Responsible for knowing all different types of grass, weeds, lawn care products, and general lawn care.
    3. Operated a company vehicle which consisted of cleaning, refueling with a company credit card, and daily inspections.
    4. Responsible for the movement of several deferent types of products, as well as some manufacturing.
    5. Operated machines that made cloth for clothes Accomplishments
    6. Closed down Skills Used Hand tools teamwork troubleshooting and problem-solving.
    7. Created custom-designed handwoven fabric. Weaved yarn together to run through a machine to make seatbelts.
Years of Experience
Experience
7-10 Years
Experience Level
Level
Management
Education
Education
BS


Weaver II Resume

Headline : To obtain a position within a company so that may utilize skills and expert experience in quality.

Skills : Strong decision making skills, Management.

Description :

    1. Performed routine preventative maintenance to ensure that building systems operated effectively.
    2. Collaborated with the previous shift to ensure a smooth workflow and efficient organization operations.
    3. Followed standards and procedures to maintain a safe work environment.
    4. Prepared and administered preventative maintenance work orders.
    5. Communicated operational issues and changes to supervisor on a regular basis.
    6. Responsible for teardowns and setups, 
    7. Responsible for changing parts out and using various types of instruments to measure parts to keep in blueprints specification.
Years of Experience
Experience
5-7 Years
Experience Level
Level
Executive
Education
Education
Diploma


Weaver III Resume

Summary : Established company while utilizing skills. Ability to learn precision skills is a must. Worked in a fast pace and multi- task environment therefore I'm a fast learner.

Skills : Machine Operator, Technical Skills.

Description :

    1. Operated a battery of Jacquard looms weaving multiple widths of intricately.
    2.  Designed narrow fabrics such as sheets, pillowcases, and comforters.
    3. Observed weaving to detect exhausted filling packages and defects in cloth resulting from worn chip in the pattern design.
    4. Replaced exhausted filling and leno packages.
    5. Pulled out filling to remove defects in weaving (dead, broken mis-picks).
    6. Replaced defective shuttles, tension springs, drop wires and heddle eyes using hand tools.
    7. Operated loom equipped with automatic stop motion to stop looms as yarn or warp end breaks or after weaving a specified number of picks.
Years of Experience
Experience
10+ Years
Experience Level
Level
Senior
Education
Education
Diploma

Weaver/Representative Resume

Summary : Machine Operator with positive attitude and a commitment to safety, quality, customer service and lean manufacturing.

Skills : Manufacturing, Operating Skills.

Description :

    1. Inspected products to ensure that specifications are met and to determine if machines need adjustment.
    2. Observed woven cloth to detect weaving defects.
    3. Examine looms to determine causes of loom stoppage, such as warp filling, harness breaks, or mechanical defects.
    4. Notified supervisors or repair staff of mechanical malfunctions.
    5. Set up, or set up and operate textile machines.
    6. Performed textile processing and manufacturing operations such as winding, twisting, knitting, weaving.
    7. Monitored operations, and make adjustments as needed.
Years of Experience
Experience
7-10 Years
Experience Level
Level
Management
Education
Education
Diploma

Weaver III Resume

Summary : Seeking to build a career with a reputable corporation. Ensured construction quality and maintain customer satisfaction, Basic knowledge of protocol and regulations.

Skills : Machine Operator, Communication Skills.

Description :

    1. Observed cloth being woven to detect weaving defects.
    2. Removed defects in cloth by cutting and pulling out filling.
    3. Examined looms to determine the cause of loom stoppages, such as warp, filling, harness breaks, or mechanical defects.
    4. Broken end and threads yarn through drop wires, heddle eyes, and reed dents to repair warp breaks, using reed hook.
    5. Pulled out the broken filling and pushes shuttle through the shed to insert new pick and repair filling breaks.
    6. Notified Loom Fixer of mechanical defects.
    7. Marked or cuts cloth when sufficient yardage has been woven.
Years of Experience
Experience
10+ Years
Experience Level
Level
Senior
Education
Education
Diploma

Weaver/Co-ordinator Resume

Summary : A challenging position, utilizing abilities developed through experience and education, with an opportunity for professional growth and responsibility.

Skills : Forklift Operator, Pallet Jack.

Description :

    1. Operated looms equipped with automatic motions to stop loom at yarn breaks or after weaving a specified number of picks.
    2. Followed specifications to reed and install reeds into various looms.
    3. Replaced defective shuttles, tension springs, and shuttle eyes, using hand tools.
    4. Replaced defective heddles and doups, using hand tools on shuttle looms.
    5. Draw in warp yarn according to specifications.
    6. Installed leases rods and knot tying warp as necessary.
    7. Pulled yarn off-loom inspect fabric to check for any mistakes woven into fabric reach daily weaver expectation goal.
Years of Experience
Experience
7-10 Years
Experience Level
Level
Management
Education
Education
Criminal Justice

Lead Weaver Resume

Summary : Seeking employment that would allow to use skills and experience to support a company while welcoming advancement opportunities.

Skills : Operating Skills, Critical Thinking.

Description :

    1. Removed defects in cloth by cutting and pulling out filling.
    2. Inspected products to ensure that specifications were met and to determine if machines need adjustment.
    3. Observed woven cloth to detect weaving defects.
    4. Guided, needled, and rolled off machines for weaving, knitting, or other processing.
    5. Examined looms to determine causes of loom stoppage, such as warp filling, harness breaks, or mechanical defects.
    6. Notified supervisors of repair staff of mechanical malfunctions.
    7. Operated textile machines that performed textile processing and manufacturing operations such as weaving.
Years of Experience
Experience
7-10 Years
Experience Level
Level
Management
Education
Education
Diploma

Asst. Weaver Resume

Objective : Seeking long-term full-time employment while gaining opportunities to learn and build experience in a field with opportunity to advance.

Skills : Pharmacology, Machine Operator, Customer Service.

Description :

    1. Performed repairs to burners, brakes, pinwheels, rapier cutters, and various other hardware with hand tools.
    2. Operated looms and checked fabric for flaws according to customer specifications.
    3. Gained experience with air pressure ball valves.
    4. Secured broken warp or selvage ends as needed to maintain running efficiency.
    5. Checked to ensure that all ends are drawn incorrectly to follow weaving patterns.
    6. Ensured the waste selvedge is running properly.
    7. Maintained a safe, clean and organized work environment.
Years of Experience
Experience
2-5 Years
Experience Level
Level
Junior
Education
Education
Information Technology

Associate Weaver Resume

Objective : Interlaces hair strands in prescribed sequence, using weaving fixture, and sews weft to mounting cord to make hair pieces, such as switches and braids

Skills : Analytical Skills, Management.

Description :

    1. Operated a chain-link fence machine. Also had to make minor repairs whenever needed.
    2. Ran the fence that was the hardest to make. Cleaned the entire plant weekly, got into the habit of keeping a clean and organized work area.
    3. Demonstrated mechanic skills because they had to work on the machines daily.
    4. Demonstrated patience, because sometimes it took hours to figure out what was causing the problem.
    5. Cleaned and set up Creel with Bobbins to get ready to start up the loom.
    6. Fed each Carbon End into their respective eyeholes by number.
    7. Set up a shuttle by placing filled Quill into fiber shuttle.
Years of Experience
Experience
2-5 Years
Experience Level
Level
Junior
Education
Education
Diploma

Weaver Resume

Objective : Applied for the Administrative and Clerical or Paralegal/Secretary positions. Work well with others and would love the chance to show skills and experience.

Skills : Machine Operator, Forklift operator, Quality Assurance.

Description :

    1. Observed woven cloth to detect weaving defects.
    2. Operated textile machines that performed weaving processing.
    3. Stopped machines when specified amounts of products have been produced.
    4. Inspected machinery to determine whether repairs are needed.
    5. Examined looms to determine the causes of loom stoppage or mechanical defects.
    6. Recorded information about work completed and machine settings.
    7. Priced the new merchandise. Woved place-mats, napkins, rugs, shrugs, shaw's, baby blankets.
Years of Experience
Experience
2-5 Years
Experience Level
Level
Junior
Education
Education
High School