An Aircraft Engine Mechanic takes responsibility for maintaining, repairing and replacing the mechanical and electronic parts of the aircraft. The job description and duties listed on the Aircraft Engine Mechanic Resume include tasks such as – conducting preventive maintenance by inspecting engines, instruments, and accessories; conducting aircraft inspections, keeping records of maintenance operations, inspecting aircraft engines, checking worn out parts and defective components; repairing the aircraft surfaces, inspecting wings and tail; and undertaking specialized services.
The most sought-after skills for the post include the following –comprehensive knowledge of aircraft systems, the ability to solve complex mechanical problems, a sound knowledge of various tools and its functions, a strong work ethic and the ability to work accurately. While there are no pre-set educational requirements, these mechanics enter the profession through their skills and on-the-job training.
Summary : Performs various tasks using appropriate tools and equipment either working independently or as a team working items within the ASM classification.
Skills : Maintenance Troubleshooting & Repair, Metal Working.
Description :
Performed depot level overhaul and repair for the F-402 low-pressure compressors.
Diagnosed and calculated the rotating components on Schenck and Hoffman's dynamic balancing machines.
Used to verify the unbalance of specific components.
Maintained, inspected, and document all components that are to be placed on the testing machinery that may cause inaccurate results and contact Quality Assurance and the Estimator and Evaluator if any discrepancy is found.
Performed trade theory such as the use of precision measurement equipment that requires accuracy without deviation to close tolerances in accordance with written specifications.
Verified part numbers and serial numbers utilizing component history card records and immediately contact support personnel of any discrepancies.
Maintained manuals, blueprints, drawings, and engineering instructions to perform my duties.
Experience
10+ Years
Level
Senior
Education
Associate In Applied Science
Jr. Aircraft Engine Mechanic Resume
Objective : Assists mechanics in technical or non-technical functions related, but not limited to: aircraft interiors, cargo bins, A/C wheels and brakes, components, aircraft systems, aircraft engine repairs, and avionics systems according to Delta and FAA specifications.
Skills : Effective Communicator, Microsoft Office, Team Leader.
Description :
Tested and evaluated a variety of aircraft turbine engines and components in one or more test cells.
Moved engine next inline via monorail system to the assigned test cell.
Positions engine in test cells working opposite sides with the other mechanic to attach fuel lines, oil lines, vibration sensors, throttle cables and to secure proper load absorbing devices such as water brake.
Maintained surveillance of test cell equipment and provides visual inspection and analysis of control panel instruments to assure proper calibration and operation.
Calibrated all instruments prior to each test run.
Inspected engine exterior, various fuel, oil, air, and electric lines.
Installed engine air, and electric lines.
Installed engine in the test cell and assures that related test accessories are properly adjusted and in place.
Experience
2-5 Years
Level
Junior
Education
Transportation
Sr. Aircraft Engine Mechanic Resume
Summary : Aircraft Engine Mechanic practices safety-conscious behaviours in all operational processes and procedures.
Performed, Maintained aircraft engine, and Auxillary powered engines.
Inspected, tested, troubleshoot, repair on aircraft.
Performed small shop duties over the journey-level mechanics in the duty section.
Scheduled within the work center and planned daily work of subordinates about 25% of time Reads blueprints/drawings interprets T.O.s.
Installed/removed, test inspects various engine components, troubleshoots and fixes engine-related problems.
Performed aircraft electrical sat com mods and secret need to know installs and structural modifications to B-2 aircraft.
Performed preventative maintenance and inspections on rotary-wing aircraft.
Experience
10+ Years
Level
Senior
Education
Certificate In Technical
Aircraft Engine Mechanic I Resume
Objective : Processing and Manufacturing, Transmission, Engine Production - Performs disassembly and assembly.
Disassembles using standard issue tooling, aircraft engines, transmissions, gearboxes, hydraulic components, fuel controls and rotor blades. Reassembles using standard and special tooling on aircraft engines, transmissions, gearboxes, hydraulic components and fuel controls to a serviceable state of condition.
Skills : Technician, Mechanic.
Description :
Troubleshoot malfunctioning engines and interrelated propulsion system components, determined the degree of disassembly or certification required, repair or replace defective components, diagnostic computers, and associated hardware.
Analyzed malfunctions using schematic and wiring diagrams, blueprints, manufacturer's specifications, computer diagnostics data, inspection findings, trending data and aircrew debriefs.
Performed engine run operation on installed and uninstalled engines, troubleshoot malfunctions or verify findings.
Removed and installed engines and auxiliary power units.
Operated, Automated Ground Test Systems (AGETS), trouble-shoot and repair aircraft jet engines.
Evaluate that the engine is running within acceptable parameters for safe operation in the aircraft.
Troubleshoot, modified, repaired, and performed sequential disassembly and assembly of gearboxes and auxiliary power units.
Performed evaluations that must be accomplished at critical points in the repair/build-up process using a variety of quality characteristics, consisting of complete systems or components and assemblies that undergo many steps in a repair process and have highly critical tolerances.
Performed scheduled and special evaluations on installed engines, auxiliary power units, and associated airframe-mounted systems.
Experience
2-5 Years
Level
Junior
Education
Associates In Aviation
Aircraft Engine Mechanic III Resume
Summary : To find and interpret appropriate disassembly/assembly procedures in pertinent technical manuals, blueprints, manufacturers specifications or similar sources. Requires skill in use of a number of jigs, fixtures, stands, mechanics' hand tools,
Skills : Technician, Mechanic.
Description :
Inspected, maintained, modified, tested, repaired and build-up various propellers, engines and equipment to include but not limited to; turboprop engines, jet engines, small gas turbine engines, missile turbo engines and engine repair support equipment (SE).
Troubleshoot and repair engine malfunctions according to technical and engineering data.
Reviewed maintenance worksheets (RBDX) during the course of engine buildup to ensure correct engineering specifications are met.
Inspected and certified engines before installation in the aircraft to ensure maximum performance is achieved.
Performed both partial and full power engine runs while the engine is installed in aircraft and/or a jet engine test cell.
Serviced, maintained and operated the jet engine test cell which is used to troubleshoot electrical, hydraulic, fuel and thrust issues in aircraft engines.
Used tools and equipment to include, but not limited to precision dial and feeler gauges, common hand tools, millimeters, oscilloscopes, vacuum tube voltmeters, temperature control test sets, jigs, fixtures, scales, and generators.
Ordered supplies, parts, equipment and tools as necessary to ensure items are on-hand to maximize production levels.
Reviewed requisitions, supporting documents and reference material to determine the supply action required in the event an item was placed on backorder.
Experience
7-10 Years
Level
Management
Education
MA
Aircraft Engine Mechanic II Resume
Headline : Responsible for inspecting, training personnel, and performing organizational, intermediate and depot level maintenance/modification on contract units, sub-systems, support equipment and related weapons system.
Skills : Mechanic, Management skills.
Description :
Performed tear down, build up, overhaul, and troubleshooting on Pratt & Whitney [] turbofan engines for the 138th Fighter Wing's F-16C fighter aircraft fleet.
Performed routine maintenance in back shop facility.
Performed tear down and build up of inlet fan, low pressure turbine, high pressure turbine, gearbox, and augmenter modules.
Experienced in repairing engine fan and compressor blades.
Tasked with engine troubleshooting on flight line during engine operation.
Experienced in Engine Data Download System to diagnose engine fault codes and malfunctions.
Performed post maintenance test runs on engines at engine test cell.
Performed routine borescope inspections on engines according to USAF technical orders using rigid and flexible fiber optic borescopes.
Performed engine pre-installation inspections before motor was installed into aircraft.
Experience
5-7 Years
Level
Executive
Education
Bachelor Of Arts
Asst. Aircraft Engine Mechanic Resume
Objective : Aircraft Engine Mechanic repair engines, sheet metal, structural, hydraulic, electrical, power train and general mechanical maintenance of moderate difficulty, required to meet the assigned missions. Makes repairs to aircraft and follows direction of higher graded workers. The Aircraft Mechanic I troubleshoots malfunctions in aircraft structure, landing gear, flight surfaces and controls, anti-icing, pneudraulic, engines, auxiliary power unit, and ventilation and heating systems
Skills : Engine Knowledge, Technician.
Description :
Performed Line maintenance (On-call and Scheduled) work on various customers' aircraft.
Performed routine maintenance and airworthiness releases (within the scope of Approval) returning aircraft to service.
Responsible for servicing, inspecting, and maintaining aircraft, aircraft engines, and associated components; effectively performs work to meet deadlines and performance goals.
Troubleshoot systems; disassemble, repair, and reassemble sections and components
Maintained full functioning equipment according and approved Technical Data provided by the customer.
Ensured all departing aircraft are safe in accordance with FARs and the air carrier/manufacturer manuals and all work performed is properly documented.
Performed line maintenance duties, activities and maintenance tasks as assigned.
Collaborated and communicated with the air carriers maintenance control center as required.
Experience
2-5 Years
Level
Junior
Education
MA
Associate Aircraft Engine Mechanic Resume
Headline : The primary purpose of this position is to certify acceptable performance, test, repair, trouble-shoot, operationally check and modify aircraft turbine and auxiliary power units, and associated propulsion system components.
Skills : Product Knowledge, Management skills.
Description :
Performed routine and preventative maintenance on aircraft engines in compliance with aircraft manuals, technical data, and service bulletins.
Conducted routine and special inspections as required.
Carried both minor and major maintenance functions as needed, such as properly lubricating engine components, cleaning, inspecting and testing engine parts, and replacing engines and propeller assemblies.
Read and interpret maintenance manuals and aircraft schematics for the purpose of diagnosing malfunctioning and damaged components, and correctly repairing or replacing components.
Verified completed work meets standards and aircraft engines are ready for operation.
Maintained aircraft maintenance forms to ensure proper documentation of all maintenance activities performed.
Tested operation of engines and aircraft systems using various test equipment such as propeller balance analyzers and engine performance calculators.
Operated forklifts and indoor overhead cranes in compliance with all safety procedures and policies.
Operated small gas engines installed in aircraft, as well as various powered ground support equipment.
Experience
5-7 Years
Level
Executive
Education
High School Diploma
Lead Aircraft Engine Mechanic Resume
Summary : The purpose of this position is to certify acceptable performance, test, repair, troubleshoot, operationally check, and modify aircraft turbine and auxiliary power units, and associated propulsion system components.
Performed maintenance and operations checks on various aircraft engine assemblies, components, and airframe systems.
Followed technical diagrams and manuals for modifying, troubleshooting, assembling, and disassembling landing gears, flight control, ground support equipment, and hydraulic components.
Overhauled the forward and aft transmissions by disassembling and assembling, meanwhile performing standard procedures to test for leaks, vibrations, and unusual noises, repairing as needed
Overhauled and repaired the pilot valves as well as the Fuel Flow Dividers to conform to standard flow rates.
Disassembled and assembled the afterburner and the afterburner actuators using the standard testing equipment to detect leaks and to ensure proper travel.
Overhauled and tested the Propeller Torque Sensor using standard testing procedures.
Inspected, removed, and installed Flight Control Surfaces while checking for cracks, corrosion, and any abnormalities.
Experience
10+ Years
Level
Senior
Education
Master's
Aircraft Engine Mechanic Resume
Objective : Performs removal, repair, installation, inspection, and operational check of installed and uninstalled F-100 aircraft engines and propulsion system components. Assists in aircraft movement using applicable towing equipment and technical orders.
Skills : Aircraft Mechanic, Trouble shooting.
Description :
Received and processed aircraft engine/components, compressors and or turbine rotors.
Examined work order and appearance of the engine component, to diagnose and determine the nature of overhaul.
Performed repair and or modification by evaluating engine performance.
Conducted inspections on unique/ complex engines.
Analyzed pilot/aircrew and or test cell's comments concerning deficiencies in the performance of aircraft, engine, special test equipment or other systems to determine the cause of the malfunction.
Removed QEC components and all other external plumbing, accessories and test equipment.
Identified test or nonstandard equipment to assure special handling.
Creating an account is free and takes five seconds.
You'll get access to the PDF version of this resume template.
Choose an option.
Sign up with Google
Sign up with Facebook
Sign up with Linkedin
This helps us make sure you're human and prevents spammers from abusing our services.
By continuing, you agree to our Privacy Policy and Terms.
Unlock the Power of Over 10,000 Resume Samples.
Take your job search to the next level with our extensive collection of 10,000+ resume samples. Find inspiration for your own resume and gain a competitive edge in your job search.
Get Hired Faster with Resume Assistant.
Make your resume shine with our Resume Assistant. You'll receive a real-time score as you edit, helping you to optimize your skills, experience, and achievements for the role you want.
Get Noticed with Resume Templates that Beat the ATS.
Get past the resume screeners with ease using our optimized templates. Our professional designs are tailored to beat the ATS and help you land your dream job.
