Certified Welder Resume Samples

As a Certified Worker, the person will lay, fit and fabricate metal pieces or components and assemble it to form a structure. A Certified Welder Resume gives a list of the following duties and responsibilities – reading blueprints and drawings, taking measurements and planning the layout and procedures; using the appropriate welding equipment based on requirements, setting components for welding as per specifications, operating angle grinders and preparing the part that is to be welded; and welding components using semi-automatic or manual welding equipment; and testing the welded surface.

To make a career in this line of work, job applicants will require the following traits – experience and proficiency in using various types of welding equipment and procedures; experience in using electrical and manual tools; and knowledge of safety standards pertaining to the occupation. A high school diploma, apprenticeship program, and a professional welding certification are the minimum qualification expected on resumes.

Certified Welder Resume example

Certified Welder Resume

Objective : To bring efficient skills, experience, and knowledge related to the certified welding field and continue to make a healthy advancement in the career. Knowledgeable about the mechanisms related to milling, threading, shaping, drill press machines, etc.

Skills : Welding, Forklift experience, Never officially certified.

Description :

    1. Used appropriate welding tools for completing different tasks such as amplifying or decreasing the size of metal objects, filling gaps or openings, amending roughened or damaged parts Welder fitter on Bolster Jig.
    2. Read blueprints and execute the project by making sure all components and parts were on site and ready.
    3. Worked closely with engineers to make sure the project was correct and any changes that need to be made.
    4. Checked all torch lines for potential problems.
    5. Responsible for bringing the tank in and lifting it with the crane, setting the tank according to the blueprint and tack it.
    6. Cut the head brace to fit between the tank head pad and the draft seal allowing for no more than a 1/16 ' gap.
    7. Cleaned and maintained the metal components with the help of various tools, namely portable grinder, wire brush, etc., and important procedures like chemical bath Performed other duties that include initiating the power supply, preheating the usable metals, etc.
Years of Experience
Experience
2-5 Years
Experience Level
Level
Junior
Education
Education
Diploma


Certified Welder III Resume

Objective : Over twenty years experience in Maintenance. Searching for an organization, industry or facility that can offer security, benefits and a retirement package as well as an organization.

Skills : Certified Welder, Mig, Inner Shield, ARC.

Description :

    1. Operated safety equipment and use safe work habits.
    2. Weld components in flat, vertical, or overhead positions.
    3. Obtaine required configurations and positions for welding.
    4. Detected faulty operation of equipment or defective materials and notify supervisors.
    5. Operated manual or semi-automatic welding equipment to fuse metal segments.
    6. Used processes such as gas tungsten arc, gas metal arc, flux-cored arc, plasma arc, shielded metal arc, resistance welding, and submerged arc welding.
    7. Monitored the fitting, burning, and welding processes to avoid overheating of parts or warping, shrinking, distortion, or expansion of material.
    8. Examined workpieces for defects and measure workpieces with straightedges or templates to ensure conformance with specifications.
    9. Recognized, set up, and operated hand and power tools common to the welding trade, such as shielded metal arc and gas metal arc welding equipment.
Years of Experience
Experience
2-5 Years
Experience Level
Level
Junior
Education
Education
Certified Welder


Certified Welder II Resume

Objective : Certified Welder, with extensive knowledge of MIG, stick weld, structural welding, crane operation and metal fabrication, reading and interpreting blueprints, drawings and diagrams, operating heavy equipment, supervising crews and maintaining proper safety standards.

Skills : Welding, Painting.

Description :

    1. Executed daily operations of equipment and machinery use.
    2. Fused parts together, sealed tension points and added metal to build up parts.
    3. Guided and directed flame and electrodes on and across work pieces to straighten, bend, melt and build up metal.
    4. Selected, positioned and secured torch, cutting tips and welding rod, according to type, thickness, area and desired temperature of metal.
    5. Ignited torch and regulated flow of gas and air to obtain desired temperature, size and color of flame.
    6. Filled cavities and corrected malformation in lead parts and hammered out bulges and bends in metal work pieces.
    7. Examined work pieces for defects and measured work pieces with straightedge and template to ensure conformance with specifications.
    8. Connected hoses from torch to tanks of oxygen and fuel gas and turned valves to release mixture.
Years of Experience
Experience
2-5 Years
Experience Level
Level
Junior
Education
Education
Vocational

Certified Welder I Resume

Objective : Manufactured steel buildings, start to finish. Complete manufacturing and assembly of transport trailers. Eight years of required schooling to obtain journeyman certification while working with residential and commercial wiring.

Skills : Security, Welder,Forklift experience, Never officially certified.

Description :

    1. Assembled hoisting equipment or rigging, such as cables, pulleys, or hooks, to move heavy equipment or materials.
    2. Bolt aligned structural steel members in position for permanent riveting, bolting, or welding into place.
    3. Connected columns, beams, and girders with bolts, following blueprints and instructions from supervisors.
    4. Cut, bended, or weld steel pieces, using metal shears, torches, or welding equipment.
    5. Drived drift pins through rivet holes to align rivet holes in structural steel members with corresponding holes in previously placed members.
    6. Erected metal or precast concrete components for structures, such as buildings, bridges, dams, towers, storage tanks, fences, or highway guard rails.
    7. Fabricated metal parts, such as steel frames, columns, beams, or girders, according to blueprints or instructions from supervisors.
Years of Experience
Experience
2-5 Years
Experience Level
Level
Junior
Education
Education
Diploma

Certified Welder/Fitter Resume

Objective : Responsible for assembling and/or finish welding structural steel beams ranging from 50 lbs to 10,000 lbs. Person will be required to maintain tolerances within the Structural Weld Manual using tape measure, square.

Skills : Welder, Technician, Operator.

Description :

    1. Read specifications or blueprints to determine the locations, quantities, or sizes of materials required.
    2. Verified vertical and horizontal alignment of structural steel members, using plumb bobs, laser equipment, transits, or levels.
    3. Connected columns, beams, and girders with bolts, following blueprints and instructions from supervisors.
    4. Hoisted steel beams, girders, and columns into place, using cranes, or signal hoisting equipment operators to lift and position structural-steel members.
    5. Bolt aligned structural steel members in position for permanent riveting, bolting, or welding into place.
    6. Fabricated metal parts, such as steel frames, columns, beams, or girders, according to blueprints or instructions from supervisors.
Years of Experience
Experience
2-5 Years
Experience Level
Level
Executive
Education
Education
GED

Asst. Certified Welder Resume

Headline : To obtain and maintain a position with an organization that will allow to utilize the welding pipe fitting, boatman, and management skills that acquired, as well as gaining new and challenging ones.

Skills : Very driven, Strong military leadership, Problem solving, Multi tasking, Customer service, Computers.

Description :

    1. Joins, fabricates, and repairs metal and other weldable material by applying appropriate welding techniques.
    2. Interprets blueprints, specifications, diagrams or schematics to determine appropriate welding process.
    3. Inspects completed welds to determine structural soundness.
    4. Operates safety equipment and use safe work habits.
    5. Weld components in flat, vertical, or overhead positions.
    6. Detects faulty operation of equipment or defective materials and notify supervisors.
    7. Operates manual or semi-automatic welding equipment to fuse metal segments, using processes such as gas tungsten arc, gas metal arc, flux-cored arc, plasma arc, shielded metal arc, resistance welding, and submerged arc welding.
    8. Removes rough spots from work pieces, using portable grinders, hand files, or scrapers.
Years of Experience
Experience
5-7 Years
Experience Level
Level
Executive
Education
Education
Technician

Certified Welder/Technician Resume

Objective : Analyze inspection data to identify root causes for weld defects and work with weld engineering and weld experts to define best practices to reduce the number of defects.

Skills : Welder,Forklift experience, Never officially certified.

Description :

    1. Responsible for managing construction and personnel to ensure quality installation for their assignments.
    2. Read blueprints and specifications to determine the scope of work: locations, quantities, and sizes of materials required.
    3. Identified safety risks and the precautions required to eliminate those risks.
    4. Prepared, fabricated, installed, and fit pipe to specifications.
    5. Installed valves, hangars, supports, flanges inside the piping system according to plans and applicable specifications.
    6. Completed all required projects before deadlines.
    7. Assembled components per blueprint specification using MIG welder/oxygen-acetylene torch.
    8. Assembly and welding of Locomotives Certified Welder for Air Brake Piping Systems.
Years of Experience
Experience
2-5 Years
Experience Level
Level
Executive
Education
Education
Diploma

Certified Welder/Mechanic Resume

Headline : Seeking employment with a progressive organization where skills and knowledge will be challenged while offering the opportunity to build a long-term career with the Company.

Skills : Welding, Aluminum welding, overhead crane, Torch, Plasma cutter, Fabrication.

Description :

    1. Performed quality production welding of utility vehicles manually and Robotically.
    2. Implemented Operator Method Sheets (OMS) for new employees and department Crossovers.
    3. Created Job Safety Analysis to warn operators of potential hazards.
    4. Developed Total Production Maintenance to provide documentation for Maintenance operators to minimize downtime.
    5. Consistently evaluated standard workflow to eliminate non-value procedures.
    6. Allocated parts to assist with heavy duty weld area.
    7. Oversaw special projects while monitoring other employees.
Years of Experience
Experience
5-7 Years
Experience Level
Level
Executive
Education
Education
Mechanical

Certified Welder/Electrician Resume

Summary : Dedicated professional with more than fifteen years experience in helping businesses thrive. Extensive work in Manufacturing, Communications, Troubleshooting and Project Planning.

Skills : Stick, Fluxcore, Mig, Tig.

Description :

    1. Tacked and weld tubing to meet company and customer requirements.
    2. Back up Weld Leader during vacations and sick days.
    3. Trained new welders when hired into the department.
    4. Able to MIG and TIG stainless steel, aluminum, and mild steel.
    5. Did special projects for the company that includes transport racks and custom parts for tubing benders.
    6. Worked with leaders and management to ensure quality products are produced.
    7. Used of multiple power and hand tools to ensure proper fit-ups to meet requirements.
Years of Experience
Experience
7-10 Years
Experience Level
Level
Management
Education
Education
Cerification In Computer

Lead Certified Welder Resume

Objective : To bring efficient skills, experience, and knowledge related to the certified welding field and continue to make a healthy advancement in the career.

Skills : Welding, Forklift experience, Never officially certified.

Description :

    1. Used appropriate welding tools for completing different tasks such as amplifying or decreasing the size of metal objects, filling gaps or openings, amending roughened or damaged parts Welder fitter on Bolster Jig.
    2. Put draft seals and webs in the jig and welded them.
    3. Read blueprints and execute the project by making sure all components and parts were on site and ready.
    4. Worked closely with engineers to make sure the project was correct and any changes that need to be made.
    5. Checked all torch lines for potential problems.
    6. Responsible for bringing the tank in and lifting it with the crane, setting the tank according to the blueprint and tack it.
    7. Cut the head brace to fit between the tank head pad and the draft seal allowing for no more than a 1/16 ' gap.
Years of Experience
Experience
2-5 Years
Experience Level
Level
Junior
Education
Education
Diploma