CNC Laser Operator Resume Samples

Description :

1. Worked for Advanced Laser Cutting Corp. Advanced Laser Cutting is a small job shop.
2. Cut wooden furniture parts for high-end furniture companies, such as Kindel, Stickley, Harden, John Widdicomb, and Alexis.
3. Accustomed to working with tolerances of a thousandth of an inch.
   
4. Set up the work area, and using CAD to make changes to G-code programs.
5. Screwed drives and motors on various woodshop equipment such as the table saw belt sander and a drill press.
6. Re-arranged the shop several times, giving the opportunity to be involved in bending conduit and pulling wire.
7. Listened to machines during operation to detect sounds such as those made by dull cutting tools or excessive vibration and adjust machines.
   

Experience

7-10 Years

Level

Management

Education

Diploma

Description :

1. Fixed common issues regarding cut quality by centering laser, replacing tip, cleaning the lens, adjusting focus, feed rate, and correcting standoff.
2. Inspected parts to match a blueprint using calipers, Tesa, micrometer, tape measure, and pin Gage's.
3. Moved sheet steel sizes up to 60" by 120" utilizing an overhead crane for thicknesses ranging from 20GA to 3/8".
4. Operated a pin-marking machine or Bridgeport (chamfering) alongside a CNC laser.
5. Completed paperwork for material usage, fill out job cards, and computer transactions for labor tickets.
6. operated machine: "Trotec Speedy 500" - production worker - screen printing, - pad printing, - thermo-lamination, - sandblasting.
7. Set up, operated and inspected the first piece to make sure the part was ok to continue to run the job.

Experience

0-2 Years

Level

Entry Level

Education

Technology

Description :

1. Set up and maintained an Expo Laser combo CNC machine.
2. Programmed and adjust feed rates to ensure premium quality parts.
3. Corrected various mistakes on a blueprint contracted through PACCAR that burned holes inconsistently.
4. Problem-solved was a huge part of the day when having to maintain a machine.
5. Physical strengthed with some sheets being up to inch thick and feet long.
6. Operated multiple machines simultaneously. Skill with numbers was important as well as basic knowledge of a computer.
7. set a 3-D Mazak Fabri gear, operated a Crone overhead crane, licensed forklift driver, read blueprints to meet specifications, use calipers.

Experience

2-5 Years

Level

Junior

Education

GED

Description :

1. Performed daily machine startup and shutdown procedures on CNC cutting equipment.
2. Staged raw materials at each work-center for the day's production.
3. Maintained daily dust collector service and associated logbook in assigned area and report equipment deficiencies.
4. Loaded material into the machine, programming machine to cut specialty hinges, forklift.
5. Entered programs and operated CNC laser, Plasma table and water jet table, Checked tolerances of the cut parts with calipers.
6. Responsible for set up, operation, and maintenance of CNC laser and reactor.
7. Changed gas banks as needed, changed and adjusted lenses and cutting heads as needed.

Experience

7-10 Years

Level

Management

Education

Computer Networking

Description :

1. Set up and operated the NTX series of carbon dioxide lasers.
   
2. Manufactured various components from steel, stainless steel, aluminum, neoprene, and silicone rubber.
3. Operated Bliss punch press, plasma cutter, and shear on several occasions.
4. Received Laid off due to a reduction in staff.
5. Shipped and handled CNC Mitsubishi laser operator 5 axis minor fabrication work.
6. Operated CNC Sheet Metal Laser, inspecting the quality of parts in accordance with quality standards and per the art print.
7. Operated overhead crane, forklifts, and overhead vacuum lifts.

Experience

10+ Years

Level

Senior

Education

Business Management

Description :

1. Set up and operated 1000 watt and 1500 watt Mazak NTX series carbon dioxide lasers.
2. Lasered to manufacture various components from steel, stainless steel, aluminum, neoprene, and silicone rubber.
3. Operated Bliss punch press, plasma cutter, and shear on several occasions.
4. Set up and operated watt Mazak NTX series carbon dioxide laser.
5. Cut various components from steel, stainless steel, and aluminum.
6. Prepared pallets with done parts and move them to the next station.
   
7. Set up and operated Triumph CNC laser. 
   

Experience

10+ Years

Level

Senior

Education

Business Management

Description :

1. Prepared machines for a workday, check work orders, equipment, supplies, and tools.
2. Planned workday by schedule work orders by type of material/sickness.
3. Find and transported the necessary material for a workday, either by forklift or overhead crane.
4. Maintained a safe work environment by following safe practices and adhering to safety policies.
5. Verified programs for correct work order numbers, identifying, and correct any issues.
6. Performed 1st part quality control, make adjustments if necessary.
7. Filled paperwork and enter data on the computer after done with work order.

Experience

7-10 Years

Level

Management

Education

GED

Description :

1. Duties include downloaded cutting programs to Trump lasers, setting up lasers by adjusting lenses to focus properly.
2. Operated forklift for transporting various sheets of stainless and hot roll steel ranging in size from four feet to ten feet.
3. Operated various machines to process steel parts. and repairing various mechanical issues that may arise.
4. Supervised and trained employees on the laser and other machines.
5. Ensured quality control and proper parts tracking to various departments.
6. Worked with management to constantly improve manufacturing processes and increase productivity.
7. Proved team leader with excellent performance reviews.

Experience

7-10 Years

Level

Management

Education

Business Management

Description :

1. Loaded PCB panels onto table securing them, insuring proper drilling into each respective location.
2. Cleaned lens using a special solution, taking special care as not to scratch the lens.
3. Reported engineering to receive and download new programs onto the CNC for new production runs.
4. Received production travelers and go to the inventory to grab appropriate panels.
5. Ran E-test ensuring all PCBs have no defects.
6. Graduated NEMCC with a certificate in machine tool and die.
7. Set-up operated Roffin laser machines. Document and visual 100% inspect parts.

Experience

5-7 Years

Level

Executive

Education

Diploma

Description :

1. Set-up and operated a CNC laser machine to cut stainless metals.
2. Inspected parts for quality after each customer's order.
3. Read blueprints and drawings and tape measurements, gauges, and precision tools.
4. Selected programs for cutting parts per customer's order and specifications.
5. Changed the cutting tools, replaced the empty plasma cylinder. Followed instructions well and work well with other coworkers.
6. Operated shear machine and forklift for moving heavy materials.
7. Assisted and help out in other depts as needed to resolve issues and problems.

Experience

5-7 Years

Level

Executive

Education

Certificate

Description :

1. Checked vertical of a laser beam and read the material checklist.
2. Burned rotary and flat boards and also steel according to paperwork for each job.
3. Finished check products to meet standard specs.
4. Cleaned nozzle and inner and outer cup also area for next shift in the mourning.
5. Got the job is done when the expected time frame.
6. Tried to resolve a problem to the best of ability.
7. Able to square and fix x and y access and shadow marks to make a clean cut.

Experience

10+ Years

Level

Senior

Education

High School