CNC Setter Resume
Summary : As a CNC Setter, set up and operated CNC machines including lathes, mills, and routers to produce precision parts according to engineering drawings and specifications.
Skills : Technical Knowledge, Blueprint Reading.
Description :
- Performed tool changes, tool offsets, and machine adjustments to ensure optimal performance and production efficiency.
- Troubleshooted machine malfunctions and make necessary adjustments to maintain production uptime and quality standards.
- Adhered to safety protocols and procedures to ensure a safe working environment for all team members.
- Prepared CNC machines for operation by installing tools, fixtures, and workpieces according to job specifications and blueprints.
- Loaded and modified CNC programs to control machine operations, including setting tool paths, cutting speeds, and tool changes.
- Operated CNC machines to produce precision components by monitoring machine performance, adjusting settings as needed, and ensuring accurate dimensions and surface finishes.
- Contributed technical expertise and drive production efficiency in a manufacturing environment.
Experience
10+ Years
Level
Senior
Education
High School Diploma
CNC Setter Resume
Summary : As a CNC Setter, responsible for operating CNC machines to produce machined components as per production schedules and quality standards, guaranteed a safe working environment.
Skills : Tooling Skills, Measurement Skills.
Description :
- Ensured that CNC and relevant manual machines within the CNC production areas are producing components as efficiently as possible, from design drawings to the standards required by Quality Assurance.
- Worked with the Cell Leader/Manufacturing planning and other members of the team, schedule work through relevant machining cells, using all relevant scheduling tools.
- Ensured that materials are available at the machine, in the correct quantities and to the correct specifications (Diameter, bore, length).
- Maintained data accuracy throughout all aspects of the role, reporting all errors using the correct procedure.
- Loaded of CNC programs.
- Ran and checked 1st off(liaising with quality when relevant).
- Machined batch complete to required standard.
Experience
7-10 Years
Level
Management
Education
High School Diploma
CNC Setter Resume
Headline : As a CNC Setter, responsible for loading and unloading workpieces, monitored machine operation, responsible for conducting first-piece inspections and in-process checks to verify dimensions and quality specifications.
Skills : Programming Basics, Problem-Solving.
Description :
- Operated CNC machines such as lathes, mills, routers, and machining centers to produce precision components according to engineering specifications.
- Experienced in selecting and installing cutting tools, performing tool changes, tool offsets, and adjustments to maintain optimal cutting conditions and minimize tool wear.
- Read and interpreted engineering drawings, blueprints, and technical specifications to ensure accurate machining processes and dimensional accuracy of finished parts.
- Identified and troubleshooted machine malfunctions, tooling issues, program errors, or quality deviations, and implement corrective actions to maintain production efficiency and quality assurance.
- Experienced with CNC programming languages (G-code, M-code), CNC control systems, machine tooling, cutting parameters, speeds and feeds, and basic understanding of machining processes and materials.
- Collaborated with team members, supervisors, engineers, and quality control personnel.
- Conveyed information clearly regarding production processes, issues, and solutions.
Experience
5-7 Years
Level
Executive
Education
High School Diploma
CNC Setter Resume
Objective : As a CNC Setter, responsible for assisting in tool setup and tool changes as needed to support production workflow, responsible for collaborating with team members and supervisors to meet production targets and resolve technical issues.
Skills : Attention to Detail, Safety Awareness.
Description :
- Performed tool changes, tool offsets, and adjustments to maintain optimal cutting conditions and prevent tool wear or breakage.
- Conducted quality checks and inspections using precision measuring tools such as calipers, micrometers, and gauges to verify part dimensions and adherence to quality standards.
- Performed routine maintenance tasks on CNC machines, such as cleaning, lubricating, and replacing worn parts, to ensure proper functionality and longevity of equipment.
- Adhered to safety protocols and procedures, including wearing appropriate personal protective equipment (PPE), to maintain a safe working environment and prevent accidents or injuries.
- Recorded production data, machine settings, and quality inspection results in logs or electronic systems for traceability and quality assurance purposes.
- Worked closely with machine operators, supervisors, and quality control personnel to meet production targets.
- Resolved technical issues, and ensure smooth workflow in the manufacturing environment.
Experience
2-5 Years
Level
Executive
Education
High School Diploma
CNC Setter Resume
Summary : As a CNC Setter, assisted with training of new employees when necessary, used a wide variety of gauges and measuring equipment calibrated in metric or imperial units (including CMM machine, if relevant).
Skills : Understanding of CNC machines, CNC.
Description :
- Operated HAAS DT1, HAAS DM2 and XYZ 1510 and 1020 machines with Siemens 828d controller.
- Operated CNC and manual manufacturing equipment to produce acceptable product per work instructions.
- Used wobbling edge finder / Renishaw probe / 3D taster.
- Maintained quality and safety standards, in line with company policy.
- Kept records of works and times.
- Maintained equipment, supplies and a clean working environment.
- Used precision measurement equipment to check machined parts against drawings.
Experience
10+ Years
Level
Senior
Education
High School Diploma
CNC Setter Resume
Headline : As a CNC Setter, liaised with engineering, with regards to all aspects of machines components for new products to include programming, fixturing.
Skills : CNC Machine Operation, Tool Setup and Calibration.
Description :
- Ensured all production processes conform to current quality standards.
- Manufactured parts in time to satisfy customer demand, strived to improve production processes.
- Trained of Operators on how to operate ABB robots and recover from an error state or emergency stop.
- Monitored hourly performance and identify shortfalls, liaising with Production
- Supervision and reporting, raising red flags where required.
- Promoted the companies HSE policies across the department and plant and adhere to all Health and Safety Environmental requirements.
- Produced machine parts by programming, setting up and operating a Computer Numerical Control (CNC) machine.
Experience
5-7 Years
Level
Executive
Education
High School Diploma
CNC Setter Resume
Headline : As a CNC Setter, experienced with stock management practices and housekeeping standards, understood and followed technical drawings, with accuracy.
Skills : Blueprint Reading and Interpretation.
Description :
- Responsible for setting up and programming all assigned CNC machines, properly and correctly.
- Responsible for preparing, editing, and reviewing all CNC programs, in a timely manner.
- Responsible for analyzing, interpreting, and utilizing all given engineering drawings, efficiently.
- Responsible for operating CNC lathes and produced prototype and complex components, as ordered.
- Responsible for inspecting CNC machinery and assisted with routine maintenance activities.
- Responsible for selecting and using appropriate measuring and inspection instruments, carefully.
- Responsible for identifying and reporting all equipment problems and work issues to authorized personnel.
Experience
5-7 Years
Level
Executive
Education
High School Diploma
CNC Setter Resume
Headline : As a CNC Setter, responsible for monitoring and maintaining the stock control of work-related equipments and supplies, responsible for implementing and adhering to established housekeeping standards at workplace.
Skills : Quality Control and Inspection.
Description :
- Carried out planned tasks in accordance with contract/requirements on services and associated systems.
- Carried out tasks within allotted time limits.
- Ensured compliance with quality standards, policies and procedures, codes and legislation including health and safety.
- Immediately reported problems, failures that may impact on the organisation and/or its clients, customers to Line Manager.
- Contributed towards the smooth running of the team.
- Adhered to all organisation policies and procedures.
- Performed basic maintenance tasks.
Experience
5-7 Years
Level
Executive
Education
High School Diploma
CNC Setter Resume
Headline : As a CNC Setter, Observed machine operation to verify accuracy of machine settings and to detect malfunctions or out-of-tolerance machining, using precision measuring instruments such as micrometer and dial caliper.
Skills : Problem-solving and Troubleshooting.
Description :
- Performed machine adjustments such as off-sets or setting tapers and basic preventative maintenance such as changing coolants, filters.
- Programmed and set up CNC to complete new product/different functions change the tooling of the CNC machine.
- Adjusted machine control, including part process.
- Verified first piece inspection using appropriate measuring instruments generally monitor the work being undertaken and completed, testing and taking agreed critical measurements to identify problems and the need for adjustment and to immediately make any adjustments as necessary.
- Posted edit CNC programme to fine tune process for optimum performance.
- Undertook agreed CNC inspection.
- Built and maintained strong professional relationship with all employees.
Experience
5-7 Years
Level
Executive
Education
High School Diploma
CNC Setter Resume
Objective : As a CNC Setter, Carried out preventative maintenance on machines, including lubrication, checking levels, making routine and minor adjustments.
Skills : Safety Procedures and Compliance, Communicational Skills.
Description :
- Experienced in set up, programming, and maintenance of CNC machines.
- Created, edited, and reviewed CNC machine programs, efficiently.
- Maintained accurate data/records/documentation associated with your work.
- Used resources and control expenses to meet agreed budgetary controls.
- Read and interpreted technical drawings to determine machine set-up and production methods.
- Notified appropriate person of deviation when needed.
- Inspected parts for defects as part of in-process inspection, recorded results, adjusted program.
Experience
2-5 Years
Level
Executive
Education
High School Diploma
