Control Engineer Resume Samples

A Control Engineer ensures that the plants in the manufacturing sector deliver the best products in an efficient manner. The key roles listed on the Control Engineer Resume lists the following – checking the plant processes, designing and implementation improvements, planning preventive maintenance, troubleshooting issues, working with other department to detect problems and implement effective solutions, maintaining quality and safety standards; creating test procedures, providing technical support and collaborating with the engineering and scientist teams.

To work at this pivotal role, employers want to see a certain amount of abilities and skills on the resumes, and such are – technical proficiency in various software applications, strong cause-effect analytical abilities, outstanding communication abilities, and the ability to work under stressful conditions. It is possible to enter this profession with an HND, GED, or through higher apprenticeship inappropriate subjects. However, a postgraduate qualification would be advantageous.

 

Control Engineer Resume example

Control Engineer Resume

Summary : Over 3 years experience in vehicle dynamic system analysis and suspension system design. Proficient in TensorFlow, machine learning and deep learning including CNN, logistic regression, SVM, and etc. Outstanding communication skills with team members, self-motivated to work hard.

Skills : Computer Skills, Excel.

Control Engineer Resume Example

Description :

  1. Monitor the loads, generator voltage, ampere, RPM, penstock pressure and system voltage.
  2. Report to Operation Superintendent any abnormalities observed during operation.
  3. Log the hourly reading of different instruments needed in the operations.
  4. Maintain electrical systems for meat processing equipment manufacturing company Motor Control, relay logic, PLC, Phase shift welders, Impulse RF induction units, grinding, punching operations and troubleshoot custom boards to component level Design and build custom controls for new processes.
  5. Troubleshoot and punch-list clear environment and iba PDA.
  6. Install and test a basic electrical circuit for a chemical mixing system Install the computer programs that ran the system.
  7. Worked as a farmhand on our own farm and on a farm doing everything from digging and maintaining ditches to mowing lawns and repairing fences.
Years of Experience
Experience
7-10 Years
Experience Level
Level
Consultant
Education
Education
Diploma


Sr. Control Engineer Resume

Headline : To provide knowledge, experience and skills to achieve organizational and corporate objectives, with responsible attitude and prompt service, always looking to do best at all.

Skills : Python, C, C++, Matlab, Simulink, Julia, Linux, Autocad, UG, Solidworks, PID, Model Predictive Control, Machine Learning.

Sr. Control Engineer Resume Sample

Description :

  1. Related to the electronics area of the whole plant.
  2. Control and Instrumentation: sensors of different physical parameters.
  3. Controllers, electronic valves, and logic programming on PLC (Mitsubishi); configurable controllers (ASI Controls) and programmable controller modules (PCM from the Trane Company).
  4. Configuration of Supervisory Control and Data Acquisition (SCADA) based system using several human-machine interfaces (HMI) develop.
  5. Use DDE and OPC communication for data sharing using different types of manufactures.
  6. Installation of air handler and humidifier controllers with PID loops for temperature and humidity control for the Clean Room process.
  7. Serve as consulter in the integration of water waste and water treatment monitoring system; RO, DI and concrete-lined waste pit using controllers to get data and show that in an HMI display; improving environmental parameters.
Years of Experience
Experience
5-7 Years
Experience Level
Level
Executive
Education
Education
Automation


Jr. Control Engineer Resume

Headline : Designed operator control systems (with input from the operators), designed screens for the operators and integrated the HMI system into the PLCs controlling the process. 6 years managing and training maintenance electrical technicians, troubleshooting electrical control systems and upgrading the capabilities of continuous rolling lines.

Skills : CX Progamming, Machine Troubleshooting, Start-up Assistance Of Machinery, Machine Maintenance, Electrical Troubleshooting Of Machinery, VFD Drive.

Jr. Control Engineer Resume Model

Description :

  1. Design control logic for use with various programmable controllers on production equipment.
  2. Perform field service function at customer location using engineering ability to diagnose and solve problems.
  3. Wiring, start-up and debug of special machinery.
  4. Develop AutoCAD electrical schematics and maintain the engineering design of electrical control panels conforming to UL 508 standards, for Vision control plate bending equipment used in newspaper and commercial printing industry.
  5. Perform construction support, equipment checkout, start-up support and field service program modifications.
  6. Collaborate with the foreign suppliers to deliver qualified compliant Star Trackers Communicated design changes and details with specialty engineering (survivability, reliability, thermal, dynamics).
  7. To ensure the sensor unit will meet performance requirements and endure space environment throughout its design life Investigate unit test failures to find the root cause and ultimately determine whether a repair/rework is necessary.
Years of Experience
Experience
5-7 Years
Experience Level
Level
Executive
Education
Education
Associates Of Science

Control Engineer III Resume

Summary : Electrical Engineer with 3+ years of experience working with various companies in the electrical industry. Excellent interpersonal and communication abilities, and possess a wide range of technical skills.

Skills : PLC Programming, HMI Programing.

Control Engineer III Resume Format

Description :

  1. Write Ladder programs for PLC's for sheet metal processing automation systems.
  2. Create HMI control screens for various automation components.
  3. Create and update electrical schematics using AutoCAD - Creating B.O.M.s, Engineering Change Notices, and reports for new and existing projects.
  4. Work as part of the system integration team on new system installations & upgrades.
  5. Travel to customer sites for installs, additions, upgrades, and training.
  6. Work on research and development for future automation projects.
  7. Meet and work with vendors to acquire new hardware and software.
Years of Experience
Experience
7-10 Years
Experience Level
Level
Consultant
Education
Education
Electrical Engineering

Control Engineer II Resume

Summary : Highly motivated and professionally trained Electrical Engineer with extensive experience and practicum seeks a position within the industry where specialized skills and abilities may be used to contribute to state-of-the-art product development and research.

Skills : Electrical Engineering, Instrumentation, HVAC, Estimation, Graphic Design, Control Drawing.

Control Engineer II Resume Example

Description :

  1. Create logic for program design using Mitsubishi PLC.
  2. Design equipment programs using Ladder, Function Block, IEC Start-up LCD Equipment.
  3. Troubleshoot and Monitor program problems of LCD process machines.
  4. Participate in customer meetings and advise programming problems.
  5. Responsible for the operation of the utility department while on shift.
  6. Complete special projects as assigned.
  7. Develop Control Engineer training program bringing new engineers online faster.
Years of Experience
Experience
7-10 Years
Experience Level
Level
Management
Education
Education
Master's In Robotics

Control Engineer II Resume

Summary : Control and Automation Engineer with more than 6 years of experience between Integrated Maintenance Services Company and Oil Refinery Maintenance. Committed, dedicated and passionate understanding the philosophy and knowledge of the different standards and concepts covering but not limited to Safety Instruments Systems.

Skills : Allen Bradley RS Logix 500., Allen Bradley RS Logic 5000., Siemens Simatic Step 7, GE Fanuc Proficy Machine Edition 8, Autocad.

Control Engineer II Resume Format

Description :

  1. Template cameras systems integration for SIGMA ALIMENTOS, programming Siemens PLC's and HMI's.
  2. Assembly Control Panel and collaborate programming Siemens S7-300 and HMI KTP600 with Step 7 and WinCC, using temperature sensor RTD PT- 100 with a PID control for cooling part of the process.
  3. Elaborate engineer drawing "As Built" and Manuals.
  4. Sewage treatment control system, for fire prevention system, Collaborate with an engineering team for the logic control, using Siemens S7-300 and HMI KTP100 including configuration networks and repeaters for PROFIBUS DP.
  5. Collaborate with the design of fire prevention system covering detection and sprinklers system using NFPA standards such as NFPA 13,70, 72.
  6. Elaborate engineer drawing "As Built" and Manuals.
  7. Provide control maintenance and project support for paper machine production.
Years of Experience
Experience
10+ Years
Experience Level
Level
Senior
Education
Education
Bachelor Of Science

Control Engineer II Resume

Summary : Responsible Control Engineer with Five years of experience in end to end project execution for control system. Passionate about engineering applications. Interfaced control system with final control element.

Skills : PLC Programming, Designing & Detailing, Engineering, Motor Control, Electrical, Instrumentation.

Control Engineer II Resume Sample

Description :

  1. Earn contracts form clients by preparing quantitative Techno-Commercial project proposal.
  2. PLC & HMI modifications and DCS interface.
  3. Learn programming of Siemens that reduce dependencies of external factors.
  4. Commission six RIO panel for ALSTOM project.
  5. Full fill customer requirement of Form four Type two Motor Control Center for the first time in firm.
  6. Test MCC panel at Vendor facility with third party Inspector.
  7. Design and Procure VFD Starter panel for 185kW and 75kW motor.
  8. Interface End user DCS with PLC that help in material management and now follow as trend to provide as utility.
Years of Experience
Experience
7-10 Years
Experience Level
Level
Management
Education
Education
Master Of Science

Control Engineer I Resume

Summary : Strong interests in electrical engineering industry with experience. As personality, strong positive can do attitude encourages to keep going in the complicated and stressful environments.

Skills : Labview, Solidworks, Autocad, Allen Bradley PLC, Mitsubishi PLC Programing, Microsoft Office.

Control Engineer I Resume Sample

Description :

  1. Build a monitoring and control Micro-grid System design.
  2. Test devices and circuit wiring by using Oscilloscope, Function Generators,Power Supply and Multimeter.
  3. Install and link all the data acquisition devices to the Lab View system.
  4. Design interface and block diagram to measure all the devices data and control the power flow for a small Grid system based on Lab View software.
  5. Combine NI hardware devices, Relays and other devices with wires and ground protection in the system.
  6. Solve fluctuation problem by using multiple filters in Lab View design.
  7. Design and Procure VFD Starter panel for 185kW and 75kW motor..
Years of Experience
Experience
7-10 Years
Experience Level
Level
Management
Education
Education
Electrical Engineering

Lead Control Engineer Resume

Headline : Experienced electrical controls and automation engineer with expertise in electrical, mechanical, hydraulic and power control systems, PLC and HMI programming, Auto Cad, Robotics, machine and facility design, leadership and management.

Skills : Allen Bradley ControlLogix Programming, Testing and.

Lead Control Engineer Resume Example

Description :

  1. Lead plant engineer for PLC programming, new automation machines, and repair.
  2. Design and build automated Poke Yoke check fixtures with PLC controls for laser weld and part detection, interference pins and other check fixtures.
  3. Generate new automated equipment to outline functions.
  4. Program HMI using Factory Talk View for visual interface touch screens and controls.
  5. Wire diagrams and wire harness equipment design using Autocad.
  6. Perform research and development of new systems, processes, machines, tools, and equipment.
  7. Program PLC, HMI, and Robot controls for welding machines, robotics, and test fixtures.
Years of Experience
Experience
5-7 Years
Experience Level
Level
Executive
Education
Education
Certificate

Control Engineer Resume

Summary : To obtain a challenging position commensurate with experience in the field of Management and Controls.

Skills : TGML Graphics, LonMaker, Vista Controller and Bacnet, DDC , Building Automation System and Access Control.

Control Engineer Resume Format

Description :

  1. Work on the Baggage Screening System in accordance with FAA regulations.
  2. Work closely with airport authority personals and agents on site.
  3. Utilize the latest Allen Bradley Control-Logix 5550 Processor and Control-Net platform.
  4. Bring online Redundancy backup system.
  5. Commission all ticket counters and tracking of bags on the sort system.
  6. Train Electricians and Airport maintenance employees.
  7. Utilize processor for the Collectors and Momentum TSX (171-CCS_760-00) for the ARMs.
Years of Experience
Experience
7-10 Years
Experience Level
Level
Management
Education
Education
Electrical Engineering