A Corrosion Engineer provides material selection and corrosion management advice to the project team and acts as a consultant when it comes to material selection and drafting corrosion mitigation strategies. While duties vary based on the employer’s requirements, the following are certain core duties mentioned on the Corrosion Engineer Resume – collecting and analyzing project technical specifications, liaising with major material and equipment suppliers, defining of anticorrosion strategy using proper chemical treatment or CRA; transferring of the corrosion strategy to the team responsible for painting and coating design, and defining laboratory experimental work in the corrosion field.
The nature of the job demands the following job skills – solid experience in process and utilities of petroleum refineries, chemical process plants; and good knowledge of written and spoken English; and in-depth knowledge of metal selection and corrosion protection; and qualifications with welding. A bachelor’s degree in chemical or metallurgical or mechanical is required.
Objective : A proven and personable Process Engineer with over 30 years experience. Experienced as both a design team leader and client representative in the areas of process design, technical support for onshore and offshore oil and gas, sulfur, and chemical processing for facilities on four continents. Skilled in development of Conceptual, FEED, and detailed designs for both brownfield and greenfield projects.
Skills : Electrical Troubleshooting, Communication SKills, Researching Skills.
Description :
Maintained,read and installed rectifiers.
Surveyed, and conducted remedial work for transmission system.
Supported of the Integrity Team Lead, develop and achieve the MR&I Corrosion budget and schedule.
Managed monthly project accruals/forecast and other project accounting and reporting activities.
Reviewed and approved contractor invoices.
Ensured proper document retention and ensure all project and survey data, records, and reports are in the Pipeline Compliance Software (PCS).
Recognized operating deviations and abnormal operating conditions, makes notifications and takes appropriate corrective actions.
Experience
2-5 Years
Level
Junior
Education
BS In Aviation Support Equipment
Corrosion Engineer Resume
Objective : Materials and Corrosion Engineer with 3 1/2 years of experience in oil gas and excellent education. Technical competences include metallurgy and welding of steels, NDT, materials selection and corrosion prevention. Italian native speaker, fluent in English and French. Advanced computer skills. Self-starter who enjoys playing in a team and solve problems analytically. Resident in Maryland.
Skills : Process Engineering, Process Management.
Description :
Designed, installed, and tested systems to reduce corrosion of energy industry assets.
Created QA/QC manuals for Bechtel/Chevron AST facility in Mississippi.
On-site reported with field sketches for as-built CAD drawings and O&M manuals.
Troubleshoot systems by video conference call with Technicians and Engineers.
Used customer requirements to determine the most cost-effective system in accordance with their project requirements.
Provided marketing materials and technical assistance by conference call.
Created Bills of Material (BOM) for manufacturing.
Experience
2-5 Years
Level
Executive
Education
BS In Mechanical Engineering
Corrosion Engineer Resume
Summary : Responsible for Following up to ensure the quality of work, and also Using technical resources and tools (Alegro Field Data PC, Fluke Digital Multimeters, Coating Holiday Detector) to perform assigned work.
Skills : Microsoft Office, Autocad, C++, Python, Matlab, Visual Basic, Arcgis, E2G API RBI, Aspen HYSYS, Lotus Notes.
Description :
Performed field survey such as soil resistivity, current requirement for oil well casing, analyze collected data and provide recommendations for corrosion mitigation.
Designed new cathodic protection systems and upgrade existing ones to mitigate corrosion of well casings, crude oil flowlines, crude oil and high/ low pressure gas transmission pipelines; in addition to tank bottoms, internal surfaces of water tanks, jetties and Platforms.
Reviewed, recommended and monitored the organic chemical corrosion inhibitors used to mitigate internal corrosion of vessels and gas and/or condensate transit lines.
Supervised the installation of corrosion monitoring coupons/ probes on various pipelines while on-line.
Reviewed and specified Paint and coating materials as per company standards.
Performed field Inspection using different testing instruments.
Supervised and distributed work force, assign the daily tasks.
Experience
10+ Years
Level
Senior
Education
B. Sc. In Materials Engineering
Corrosion Engineer Resume
Headline : Responsible for Developing and maintaining positive team member relations centered on mutual trust, dignity, respect, fairness, consistency, two-way communication, teamwork, and harmony.
Functioned as the Asset & Operations Integrity (A&OI) Chemical Treatment and Corrosion Engineering Technical Representative for Production Operations, Production Engineering, and First Delivery Teams.
Responsible for managing corrosion and chemical treatment programs for 10,000+ E&P facility locations and upwards of 300 annual new drill E&P facility locations Coordinate and approve specialty chemical treatment requests including gas, water and deposit analyses.
Responsible for operational oversight of global chemical suppliers Champion Technologies, Inc.
Wrote Level 2 truck treating procedure that was adopted by SJBU.
Reviewed and approved 2500 invoices monthly.
Reported to Reliability Group Manager with the responsibility to perform corrosion analysis of piping and equipment of REC Silicon, Moses Lake.
Created database for corrosion analysis of piping and equipment for the entire plant.
Experience
5-7 Years
Level
Executive
Education
MBA In Business Administration
Corrosion Engineer Resume
Objective : Performance-driven engineer with experience in fabrication, material selection, plastics, and simulation of 3D plastic parts. Have worked on several projects ranging from welding of oil distribution pipelines, platforms for Exxon Mobil, pressure vessel, and SolidWorks Plastic simulation of injection-molded 3D printed parts. A result-driven and detail-oriented engineer.
Skills : Solidworks, Agile, Waterfall, Microsoft Office.
Description :
Collaborated with other members of the integrity team to ensure subsea pipelines and structures were properly inspected and maintained with the pipeline databases being periodically updated and risk ranked.
Determined types of coating to be used for pipelines in order to mitigate corrosion.
Designed cathodic protection system for pipelines as part of a team.
Calculated corrosion allowance for pipelines so as to know the life span of the pipe.
Produced material selection reports.
Performed corrosion prediction studies for up-stream and down-stream applications.
Participated in establishing a testing protocol for the persistence of chemical inhibitors.
Experience
2-5 Years
Level
Executive
Education
Mechanical Engineering
Corrosion Engineer Resume
Objective : Corrosion Engineer with reliability engineering experience in petrochemical refineries. Very familiar with root cause failure analysis (RCFA), damage mechanism identification, ASME Section VIII Div 1, B31.3, and fitness for service evaluations (API 579). Management experience in a variety of settings, commercial, government, and military. Self-starter up for any challenge.
Skills : Microsoft Office, Autocad, Public Speaking.
Description :
Performed CIS (Close Interval Surveys) on a high-pressure gas pipeline to analyze the cathodic protection and possibility of corrosion.
Reviewed, analyzed, and troubleshoot possible failures with an unprotected steel pipe.
Utilized AutoCAD to draw Cathodic Protection systems for clients.
Analyzed and troubleshoot cathodic protection deficiencies in large gas line distribution circuits.
Reported and procedure writing to/for clients.
Simulated corrosion occurrences in wet pipelines and predicted general corrosion rates.
Experience
2-5 Years
Level
Executive
Education
BS In Civil Engineering
Corrosion Engineer Resume
Objective : Corrosion Engineer with 2+ years of experience in Preparing and updating Corrosion Control Standard Operating Procedures and Corrosion Control Guidelines to support program and team development.
Skills : MS Office, Planning Skills, Multitasking.
Description :
Included management of titanium alloy corrosion and mechanical testing programs as well as production, customer, and sales support.
Gained experience in the fields of metallurgy, materials, and mechanical engineering.
Responsible for the management of the corrosion lab which includes high temperature, high pressure (autoclave), and electrochemical testing.
Worked directly supported the Technical Marketing Group which seeks to penetrate new markets for the use of titanium alloys in corrosive environments.
Co-authored a paper titled Stress Corrosion Behavior of Ru Enhanced Alpha-Beta Titanium Alloys in Methanol Solutions presented at the National Association of Corrosion Engineers (NACE) annual conference in San Diego, California.
Developed and maintained working knowledge of MPC and regulatory mechanical integrity, corrosion management, and inspection standards.
Participated in investigation or root cause failure analysis as assigned and accurately identify corrosion mechanisms and establish inspection programs to monitor those mechanisms.
Experience
2-5 Years
Level
Executive
Education
BS
Corrosion Engineer Resume
Objective : To establish a long-term career in a company where I may utilize my Corrosion Engineer professional skills and knowledge to be an effective Associate Program Manager and inspiration to those around me.
Created or improved corrosion management processes by applying management systems to assure the integrity and enhance accuracy, efficiency, and compliance for areas of responsibility.
Assisted in timely selection of material upgrades for replaced items, especially heat exchangers, piping, rotating equipment components, machinery components, etc.
Provided support and/or coordination of the technical design basis for local refinery projects.
Assisted in management of inspection programs at the refinery, including Risk-Based Inspection, Integrity Operating Windows, Positive Material Identification, Fitness for Service, etc.
Oversaw mechanical testing and failure analysis performed by third party companies/consultants.
Assisted Area Teams in corrosion gap analysis for refinery units.
Reviewed, maintained, and updated the local Materials & Damage Mechanism Drawings (Corrosion PFD/CMDs).
Experience
2-5 Years
Level
Junior
Education
Ph.D. In Chemical Engineering
Corrosion Engineer Resume
Summary : Accumulated more than 7 years of valuable research and engineering experience by working in full-time and part-time positions at the materials and corrosion departments of several research institutes and companies. These experiences have granted me a broad set of technical and business skills.
Skills : MS Office, Planning Skills, Multitasking, Engineering Skills.
Description :
Actively participated in company-sponsored Refinery Advisory Groups and ensure that programs at the Ohio Refining Division meet industry and corporate standards.
Established equipment baseline life expectancies and assist in timely selection of material upgrades for replacement items (i.e. - a heat exchanger and piping components).
Compiled and monitored our chemical treating vendor corrosion coupons/thickness monitoring probe data with the Tech Service and Operations Departments.
Participated in completing incident investigations and follow up on recommendations as assigned.
Undered the direction of a Project Manager, design and specification of materials for cathodic protection systems including impressed current and galvanic anode systems for pipelines and other metallic structures.
Used industry standard calculations for design.
Used industry-standard calculations differentiating between grounds for galvanic anode systems.
Experience
7-10 Years
Level
Management
Education
BS
Corrosion Engineer Resume
Headline : Responsible for Ensuring proper application of methods and procedures, modify as appropriate, and also Performing economic evaluations of alternative methods of cathodic protection and corrosion control.
Skills : PCS CPDM, Microsoft Office.
Description :
Supported field staff involved in testing and installation.
Maintained technical knowledge in this field.
Designed and/or maintained key dashboards and metrics to support safety, quality, delivery, and cost visibility as part of the operational control process.
Designed complete CP projects, inclusive of Impressed Current Cathodic Protection (ICCP) systems.
Ensured company personnel and contractors are qualified to perform Covered Tasks.
Kept informed of new developments and requirements affecting Hess for the purpose of recommending changes in the process.
Provided project teams direction on CP requirements (example, new sacrificial anode system, new ICCP system, connecting to existing CP systems, etc.).
Creating an account is free and takes five seconds.
You'll get access to the PDF version of this resume template.
Choose an option.
Sign up with Google
Sign up with Facebook
Sign up with Linkedin
This helps us make sure you're human and prevents spammers from abusing our services.
By continuing, you agree to our Privacy Policy and Terms.
Unlock the Power of Over 10,000 Resume Samples.
Take your job search to the next level with our extensive collection of 10,000+ resume samples. Find inspiration for your own resume and gain a competitive edge in your job search.
Get Hired Faster with Resume Assistant.
Make your resume shine with our Resume Assistant. You'll receive a real-time score as you edit, helping you to optimize your skills, experience, and achievements for the role you want.
Get Noticed with Resume Templates that Beat the ATS.
Get past the resume screeners with ease using our optimized templates. Our professional designs are tailored to beat the ATS and help you land your dream job.
