Engineering Technologist Resume Samples

An Engineering Technologist undertakes responsibility for analyzing and modifying new and existing engineering technologies and applies them in the testing and implementation of engineering projects. While the actual duties and responsibilities vary from industry to industry, the following are certain core and common duties that are listed on the Engineering Technologist Resumeanalyzing existing technology; making recommendations on improving existing technologies, running technology through testing procedures and notes findings; preparing drawings of new technologies; and evaluating the results of analyses.

While actual technical qualifications vary based on the engineering stream, the following are certain skills that are universally common and needed – strong math knowledge and skills, technical designing skills, the ability to read and understand manuals and schematics, and strong familiarity with computers and electronics. Usually, a bachelor’s degree in a related engineering discipline is needed, however, some states accept training gained through Vocational education and training.

Engineering Technologist Resume example

Engineering Technologist Resume

Summary : Respected and self-motivated Engineering Professional. Experience managing large-scale projects from the requirements gathering phase to completion. Highly skilled in tracking details, communicating deadlines, and following-up with customers to ensure on-time completion. Ability and interest in learning and incorporating new technology.

Skills : National Instruments PXI I/O O VME I/O O LabVIEW.

Description :

    1. Windows system administration for the Electrical Community Laboratory's 150 clients and 10 servers.
    2. Supported user accounts maintenance, NTFS permissions, DNS and DHCP server configurations, Active Directory.
    3. Installation of UNIX on 14 new Sun Netra T5220 servers including hardware configuration and repair.
    4. Configured for I/O system development.
    5. Hardware supported for VME and National Instruments (NI) based IO systems.
    6. Designed to implementation of these systems.
    7. Developed a new LabVIEW I/O Executive for the NI I/O.
Years of Experience
Experience
10+ Years
Experience Level
Level
Senior
Education
Education
AAS in Electrical Technology


Engineering Technologist Resume

Summary : Twenty-eight years of automotive experience in product design, quality, and repair. Expertise in assisting engineers in product development including design, quality containment actions, and material cost reviews to meet long-term goals. Proficient in reading and interpreting schematics and prints, Lead vehicle builds and quality containment actions at customer build sites.

Skills : Solidworks, Creo, Autodesk Inventor, Microsoft Office, NX, Autocad.

Description :

    1. Performed evaluation, characterization, and forensic analysis of PDC cutters and HPI diamond impregnated material for use in oil field drill bits.
    2. Operated various analytical equipment for cutter evaluation: Scanning Electron Microscope (SEM), Keyence 3D Scanner, Leitz, and Zeiss microscopes.
    3. Oversaw laboratory testing, data processing, and presentation of data.
    4. Made recommendations to management for field testing of cutters, when warranted.
    5. Received positive feedback from Product Management due to successful outcome from low-cost cutter project in which the company saved $3M annually as compared to amount previously spent on Genesis II cutters.
    6. Led a project that implemented a new test procedure for screening TSP diamond material; efforts raised incoming material quality standards which led to improved bit life and increased margins.
    7. Used Visio and AutoCAD for electrical and facility drawings.
Years of Experience
Experience
10+ Years
Experience Level
Level
Senior
Education
Education
BBM


Engineering Technologist Resume

Summary : Leading project for sourcing and evaluation of low-cost PDC cutter from alternate (non-premium) supplier for use in new Genesis II product which created significant New Product Revenue (NPR) by competing in price-sensitive markets where the company wasn't competitive previously.

Skills : Microsoft Access, OFM, WellView, OpenWells, BOLO, RIO, LOWIS, DSS, IHS Enerdeq.

Description :

    1. Prepared initial draft of AFEs and track AFE approval status and proper API numbers.
    2. Used MS Project to create and maintain schedules with completion percentages, new forecast start and completion dates, and forecast duration of projects.
    3. Used WellView to track costs of projects and timing of projects, also extract historical data from the backend of WellView to run queries to fit the engineer's needs.
    4. Assisted engineers with cost tracking by collecting cost data from field locations and using BOLO.
    5. Assembled and filed project data from vendors and fabricators.
    6. Prepared an initial draft of PO's and contract award letters and assemble exhibits in proper file format.
    7. Issued Requests for Proposals, track bids, and prepared bid summary.
    8. Collected cost data from work locations and prepare cost reports.
Years of Experience
Experience
10+ Years
Experience Level
Level
Senior
Education
Education
Associate of Specialized Business

Engineering Technologist Resume

Summary : Engineering Technologist with 34+ years background in Oil Field Drill Bit Research. Core competencies include Test Development, Materials Testing, and Data Analysis as well as excellent communication and time management skills. Handles tasks with accuracy and efficiency. Able to work independently and in a team environment.

Skills : Microsoft Office, Office Assistant, Phone, Customer Service, Microsoft SQL Server, SAP, Microsoft Visio, Javascript, Data Entry.

Description :

    1. Responsible for evaluating PDC cutters from alternate (non-premium) suppliers for use in Genesis II product.
    2. Source/evaluate/test a lower cost-cutter that replaced the premium cutter.
    3. Product Management commented they would now save more than previously spent on Genesis II cutters.
    4. Responsible for testing and evaluation of other diamond materials for PDC and impress bits: HPI posts, TSP's, synthetic, and natural diamond grit.
    5. Evaluated matrix and binder materials to improve performance and wear properties for impregnated drill bits.
    6. Outcome from our tests was the launch of the 'Iver' impregnated drill bit which won Hart's E&P Award for Engineering Innovation for 2014.
    7. Received three Patents regarding impregnated drill bit innovation.
Years of Experience
Experience
10+ Years
Experience Level
Level
Senior
Education
Education
BBM

Engineering Technologist Resume

Summary : Driven, self-disciplined individual seeking long term employment with a growing, stable company. Seeking work that will challenge the skill set and also complements hard-working nature.

Skills : Communication Skills, Troubleshoot, Designing Skills.

Description :

    1. Interfaced with jet engine design engineers to ensure facility readiness for engine testing.
    2. Designed signal conditioning systems to read turbine flowmeters, pressure transmitters, thermocouples, and other sensors.
    3. Designed testing facility installations and upgrades.
    4. Designed included PLC systems (and related software), fuel/water pumps, high voltage switchgear, and distribution panels - Manage electrical contractors installing electrical systems.
    5. Troubleshoot electrical gear, up to 6.9kV systems.
    6. Cooperated with fellow engineers to implement design practices for hardware and software.
    7. Designed and constructed took place over 3 years.
Years of Experience
Experience
10+ Years
Experience Level
Level
Senior
Education
Education
ME in Electrical Engineering

Engineering Technologist Resume

Summary : Seeking an Engineering Technologist position, which will use experience, high standard of work ethics, and excellent interpersonal skills to the benefit of the employer.

Skills : Research And Development, Technology Transfer, Process Design, Product Development, Microsoft Office, Lotus Notes, Testing Equipment Chemical, And Physical, Environmental Health & Safety.

Description :

    1. Responsible for operating, performing preventative maintenance, troubleshooting, and repairing all live-fire/laser target systems and Vehicle Detection Systems.
    2. Trained in the use of class 'C' pyrotechnics, which is used extensively.
    3. Provided support for MILES equipment repair and maintenance when needed.
    4. Installed highly sophisticated electrical systems in a variety of vehicles used by the Transportation Safeguards Division.
    5. Reconfigured the 'stock' vehicle electrical systems to meet mission requirements.
    6. Held a DOE 'Q' clearance.
    7. Built and modified electrical harness assemblies and form-board layouts.
Years of Experience
Experience
10+ Years
Experience Level
Level
Senior
Education
Education
Resistance and Education

Engineering Technologist Resume

Summary : Seeking to obtain an Engineering Technologist position in the Computer Information Systems field, where education and experience will ensure company growth.

Skills : ARIES, Access, Word.

Description :

    1. Expeditionary Forensics Engineering Tech Lead.
    2. Provided direct physical support to the Navy and Army customers and technical support to multiple Labs, from initial site planning and layout to Power Generation, distribution, and HVAC layout along with certifying that all equipment is compliant and ready for operation.
    3. Provided and performed all installations of Expeditionary Forensics shelters, power generation equipment, and the power grid.
    4. Installed, troubleshoot test, and performed precision measurements related to technical issues and repair electronic lab equipment, install and terminate all electrical cabling systems such as power cables and cabling for IT Networks and make repairs as needed.
    5. Provided planning for emergency back-up power via generator (Caterpillar C-15) or battery.
    6. Participated in the review of engineering change proposals, trouble and failure reports, and corrective action reports.
    7. Provided recommendations for action.
    8. Assisted in analyzing system deficiencies, take a responsible position in proposal preparation, identify and control of parts inventory and requisitions to replenish inventory, shipping assets to and from the theatre.
Years of Experience
Experience
7-10 Years
Experience Level
Level
Management
Education
Education
Certificate

Engineering Technologist Resume

Summary : Dedicated Controls Engineer with over 6 years experience. Extensive skills in PLC/HMI/SCADA programming. Certified AutoCAD Professional with a specialty in AutoCAD Electrical for control cabinet and MCC design. Self-motivated with strong organizational and communication skills.

Skills : ESRI ArcGIS, Smallworld, Microsoft Office Excel, Publisher, Outlook, OneNote, Sharepoint, ERDAS Imagine, Q GIS, TransCAD, Written Correspondence, Regulatory Compliance Telecommunications, Read And Understand Site Development CAD Designs, SQLite.

Description :

    1. Provided technical expertise and guidance in the identification, analysis, and resolution of problems in the area of expertise.
    2. Principally, designed electric infrastructure in new communities and subdivisions.
    3. Created a design of infrastructure, into Expert Designer, utilize an EGIS (Smallworld) for creating maps, and using the work management system for running reports.
    4. Managed the work assigned.
    5. Ensured an accomplishment of business goals and objectives through effective planning, organizing, estimating, scheduling, and monitoring of work activities.
    6. Prepared thorough and accurate technical reports, correspondence, documentation, calculations, and sketches.
    7. Conducted engineering and related studies Assure the design meets reliability and integrity of Duke Energy's infrastructure.
    8. Conducted research in the field gathering notes and taking pictures of existing facilities that need to be replaced.
Years of Experience
Experience
7-10 Years
Experience Level
Level
Management
Education
Education
MS Certificate GIS

Engineering Technologist Resume

Headline : Experienced Engineering Technician Instrumentation and Data Acquisition / Control Systems Strain, Temperature, Pressure, and Vibration Sensor Installations Sensor / Test Equipment Calibration and Repair.

Skills : AutoCAD MasterCAM MAS 90 CNC Programming Linux Python SolidWorks Javascript Mathcad PCB Design Electrical Circuit Design, STEP 7 / TIA Portal V13 Professional / WinCC Runtime Professional.

Description :

    1. Maintained, repaired, and calibrated test instrumentation and data acquisition systems.
    2. Coordinated sensor and equipment calibrations with in-house and vendor services.
    3. Maintained quality control records and systems.
    4. Researched and implemented new sensor and equipment technology.
    5. Strained gauge transducer instrumentation.
    6. Reduced accelerometer calibration costs by 50%.
    7. Reviewed, for acceptance, the Westinghouse Quality Program for procurement of nuclear fuel.
Years of Experience
Experience
5-7 Years
Experience Level
Level
Executive
Education
Education
Diploma

Engineering Technologist Resume

Objective : An energetic, self-starting, open-minded, qualified individual with supervisory experience as well as over 25 years of experience in a quality workforce. Completed continuing education credits in Total Quality Management, Engineering Statistics, Value Engineering, and Manufacturing Materials and Processes.

Skills : Technologist, Technician, Project Management, Warranty Analysis, Troubleshooting.

Description :

    1. Conducted internal and external audits, surveillance, and inspections.
    2. Prepared Quality Assurance checklists fulfilling requirements of 10CFR50, Appendix B, Part 21, NQA-1, N45.2, ASME, QS-9000, and ISO 9000 Programs.
    3. Initiated follow-up corrective action, when necessary.
    4. Directed activities of multi-participant audit teams while serving as an audit team leader.
    5. Audited the development and design of computer programs related to engineering and inspection activities.
    6. Reviewed procedures, contracts, and procurement documents regarding regulatory codes and quality requirements.
    7. Performed and witnessed various tests and inspections on materials or equipment.
Years of Experience
Experience
2-5 Years
Experience Level
Level
Junior
Education
Education
BS in Mechanical Engineering Technology