An Extruder takes charge of operating and maintaining machines that extrude thermoplastic or metal materials into bars, tubes, structures, rods, and hoses. A well-drafted Extruder Resume mentions the following duties and tasks – selecting machine dies, determining the setup procedures, drawing or pressing metals into shapes and diameters; reeling extruding products into rolls; specifying lengths and weight of rolls, adjusting controls, installing and adjusting equipment, cleaning tools; positioning insulation over conductors; removing excess filaments from machines, and adjusting extruding machines.
Those looking to work as Extruders should be able to showcase the following skills on their resumes – attention to safety, machine operation skills, basic maintenance skills, knowledge of reading blueprints, machine calibration proficiency, familiarity with OSHA regulations, and experience in operational adjustments. Formal education beyond a high school diploma is not needed, as incumbents are provided on-the-job training.
Headline : To find a long-term career and location where can be best suited. Looked for challenges that can overcome to better fulfill an employer. Hands-on work are where most comfortable.
Skills : Machine tech, Fast learning, and capable of operating.
Description :
Ensured safety of myself and fellow team members.
Paid close attention to measuring tolerances of extruded metal.
Followed specific specs of racking and sending metal.
Helped keep for consistent, smooth, and organized production.
Completed and passed 'A' school as well as obtained my mobile equipment license.
Successfully trained multiple new hires. Developed a sense of leadership and awareness.
Applied leadership skills in dealing with fellow team members and production.
Experience
5-7 Years
Level
Executive
Education
Human Services
Extruder/Representative Resume
Summary : Reliable and adaptable General Labor worker with an agreeable disposition and a stellar customer service ethic. Adept multitasker with abilities to handle a number of workplace responsibilities.
Replaced worn dies, Clean tools. Located defects on extruded products.
Checked for conformance to specifications.
Adjusted controls as necessary.
Installed, connected, tested, and adjust equipment.
Seal splices with moisture-proof covering.
Experience
7-10 Years
Level
Management
Education
Diploma
Extruder II Resume
Headline : Long-term employment, where past work experience, training, as well as work ethic, ability to get along with others, and reliability will be fully utilized.
Skills : Technical Skills, Management.
Description :
Set up and operated extruders for the production of landscaping and gardening containers.
Built orders according to ticket information.
Met the requirements of quality and production quantity on a daily basis.
Performed material changeovers Operate tow motor / forklift, unload, and load materials.
Manually lifted materials and rotate stock for the operation of extruder machinery.
Cut the rubber to the right weight and size.
Cleaned up every tool that was used with alcohol.
Experience
5-7 Years
Level
Executive
Education
Creative Writing
Extruder/Executive Resume
Headline : Sets up and operates extrusion press to shape hot billets into products, such as bars, tubing, structural shapes, and rods. Installs dies, mandrels, containers, heating coils, press tools.
Skills : Analytical Skills, Critical Thinking.
Description :
Responsible for loading and unloading stock stands.
Set up splicers, slitters, marking systems, and lasers
Able to operate extruder stations during the absence of the Lead Operator.
Responsible for providing the production area with the proper raw materials listed on the work order.
Relocated and reporting the movement of said raw materials using the current reporting system (SAP).
Maintained the cleanliness of the work area.
Ensured that it operated in a safe, productive manner.
Experience
5-7 Years
Level
Executive
Education
Diploma
Extruder/Analyst Resume
Headline : Extrusion operators sometimes called extruding and drawing machine operators, control and monitor machines that shape thermoplastic materials. They work in a number of the manufacturing industries.
Skills : Technical Skills, Management.
Description :
Maintained the cleanliness of the work area.
Ensured that it operated in a safe, productive manner.
Responsible for performing preventative maintenance of equipment.
Able to set up and operate equipment and machinery where ordinary adjustments are required.
Cleaned, disassemble, and remove at the end of a job.
Able to perform manual tasks where accuracy is important.
Set up and adjust delicate instruments as well as enter data into the designated database.
Experience
5-7 Years
Level
Executive
Education
Diploma
Extruder/Analyst Resume
Headline : Assist in the installation, maintenance, and repair of machinery. Operate tools in order to aid in the manufacturing process. Perform periodic checks on equipment and solve problems as detected.
Skills : Technical Skills, Critical Thinking.
Description :
Responsible for ensuring equipment is maintained in a serviceable condition.
Conducted daily documented inspections.
Exhibited departmental and plant leadership for meeting safety, customer service.
Produced goals, and the certification of peers.
Required to meet Plant/Company guidelines for attendance.
Properly label, package, and maintain all hazardous material in accordance with EPA requirements.
Performed all required in-process and release testing per SOP or special instruction.
Experience
5-7 Years
Level
Executive
Education
Diploma
Extruder Resume
Headline : Seeking an Extruder profession with an outstanding career opportunity that will offer a rewarding work environment along with a winning team that will fully utilize management skills.
Skills : Analytical Skills, Leading Skills.
Description :
Ran extruders maintaining correct settings.
Bundled and stacked molding as it is extruded.
Monitored color, extrusion rate, profile configuration, and piece/bundle count.
Maintained a supply of compound staged at the machine.
Maintained extrusion equipment in proper condition.
Performed own tooling change-outs and die cleaning and grade own rejects.
Assisted in moving units of extruded materials when necessary.
Experience
5-7 Years
Level
Executive
Education
Diploma
Asst. Extruder Resume
Headline : Extruders are used to produce long continuous products such as tubing, tire treads, and wire coverings. They are also used to produce various profiles that can later be cut to length.
Skills : Critical Thinking, Management.
Description :
Performed own tooling change-outs and die cleaning and grade own rejects.
Assisted in moving units of extruded materials when necessary.
Responsible for cleaning any burrs or fuzz off profiles and for keeping the work area clean.
Ensured profiles are all turned in the same direction and bundled correctly.
Utilized statistics and MFG data to solve manufacturing process problems.
Attached dies and install appropriate downstream equipment extrusion lines.
Adjusted extrusion lines to produce customer specified dimensions.
Experience
5-7 Years
Level
Executive
Education
Diploma
Lead Extruder Resume
Headline : Operating a Machine means controlling the working action of a machine and accepting responsibility for the observance of the manufacturing specifications of the process.
Skills : Management, Analytical Skills.
Description :
Performed the primary thinking encompassed by this job description.
Complied with all Company policies and procedures.
Maintained operation of multiple lines.
Loaded gaskets and packaging end product for shipment.
Visually inspected products for quality assurance purposes.
Measured and recorded pipe dimensions as required. Take the proper action according to SPC Charting
Controlled dimensions to maintain pipe specifications with direct supervision.
Experience
5-7 Years
Level
Executive
Education
Diploma
Extruder Resume
Headline : Extruding machine technicians are responsible for prepping and operating the shape-forming machinery used in the production of metal and plastic bars, hoses, rods, or other tubular shapes.
Skills : Technical Skills, Management.
Description :
Reported any equipment malfunctions, product defects, or unsafe conditions immediately.
Read and Understand SOPs contained in Operator Manual
Relieved and assist other operators as needed.
Worked as a team with other personnel. Other duties as required
Followed all SAFETY rules per orientation.
Possessed the skill and ability to purge a line down with supervision.
Creating an account is free and takes five seconds.
You'll get access to the PDF version of this resume template.
Choose an option.
Sign up with Google
Sign up with Facebook
Sign up with Linkedin
This helps us make sure you're human and prevents spammers from abusing our services.
By continuing, you agree to our Privacy Policy and Terms.
Unlock the Power of Over 10,000 Resume Samples.
Take your job search to the next level with our extensive collection of 10,000+ resume samples. Find inspiration for your own resume and gain a competitive edge in your job search.
Get Hired Faster with Resume Assistant.
Make your resume shine with our Resume Assistant. You'll receive a real-time score as you edit, helping you to optimize your skills, experience, and achievements for the role you want.
Get Noticed with Resume Templates that Beat the ATS.
Get past the resume screeners with ease using our optimized templates. Our professional designs are tailored to beat the ATS and help you land your dream job.
