Flux Core Welder Resume Samples

A Flux Core Welder creates frames for large buildings, bridges, and structures. Job duties commonly mentioned on the Flux Core Welder Resume are – installing pressure vessel scrubbers and bottles; installing and checking control valves, aligning and installing pipe gaskets and flanges; installing supports and brakes, aligning and securing parts and assemblies before assembly; inspecting completed parts, performing regular maintenance tasks; identifying a weakness, training workers; and maintaining safety standards.

Those seeking to work at this capacity should be able to showcase on the resume the following skills – the ability to read blueprints, schematics, and design drawings; measuring abilities; manual dexterity; the ability to perform complex mathematics; and physical abilities. Relevant certification is needed for this job. However, a degree is not mandatory. Skillful and experience in using welding equipment is a crucial job asset.

Flux Core Welder Resume example

Flux Core Welder Resume

Objective : As a Flux Core Welder, responsible for Welding, fitting, drilling, screwing, cutting, Accomplishments Quicker time at meeting deadlines with quality and satisfaction for the customer.

Skills : Stur Welding, Mig, Flux Cord.

Description :

    1. Operated safety equipment and use safe work habits.
    2. Welded components in flat, vertical, or overhead positions.
    3. Ignited torches or started power supplies and struck arcs by touching electrodes to metals being welded.
    4. Clamped, held, tack-welded, heat-bended, ground, and bolted component parts to obtain required configurations and positions for welding.
    5. Detected faulty operation of equipment or defective materials and notified supervisors.
    6. Operated manual or semi-automatic welding equipment to fuse metal segments, using processes such as gas tungsten arc, gas metal arc, flux-cored arc, plasma arc, and shielded metal arc.
    7. Monitored the fitting, burning, and welding processes to avoid overheating of parts or warping, shrinking distortion, or expansion of the material.
Years of Experience
Experience
2-5 Years
Experience Level
Level
Executive
Education
Education
GED


Flux Core Welder Resume

Objective : Seeking a Flux Core Welder position with an outstanding career opportunity that will offer a rewarding work environment along with a winning team work.

Skills : Welding And Fabrication, Machine Operator, Forklift Driver.

Description :

    1. Assisted other workers when needed.
    2. Operated Forklift on regular basis Accomplishments Working as a team was able to complete all job assignments on schedule.
    3. Used Flux core welding, working with a plasma torch and cutting torch,.
    4. Operated overhead cranes moving heavy structural including rigging for moving structures around in the shop.
    5. Operated Forklift on a daily basis moving finished weldments to other areas.
    6. Completed Forklift safety course.
    7. Welded all vessels that were in the shipyard General duties as assigned.
Years of Experience
Experience
2-5 Years
Experience Level
Level
Executive
Education
Education
G.E.D


Flux Core Welder Resume

Objective : Seeking a Flux Core Welder position with job security, in a professional atmosphere. Quality education blended with diligence and integrity enables me to perform efficiently in the professional environment.

Skills : WeldOperatate Forklift, Overhead Crane, CPR.

Description :

    1. Performed welding duties using wire welding GMAW (Gas Metal Arc Welding), FCAW (Flux Core Arc Welding), or SMAW (Stick Welding).
    2. Welded steel components with welding equipment as specified by procedures, layouts, blueprints, diagrams, work orders, or oral instructions.
    3. Welded range from simple tasks to complex welds, performed in varying positions.
    4. Worked includes set-up, laying out work using fixtures and guides to repair, modify, or fabricate parts and/ or equipment products.
    5. Acquired welding certification by the KPI Quality Assurance Dept.
    6. Operated and/ or related equipment and tools which include forklift, hoists, slings, grinders (portable & bench), cutting torches, hand tools, drills, punches, a tape measure, and Air Arc.
    7. Kept equipment operational by completing preventive maintenance requirements; followed manufacturer's instructions; troubleshooting malfunctions; called for repairs and complete the daily check sheets.
Years of Experience
Experience
2-5 Years
Experience Level
Level
Executive
Education
Education
GED

Flux Core Welder Resume

Objective : Over 2 years of experience in Flux Core Welder able to read and understand the blueprints, shop drawings, and welding symbols, etc.

Skills : MS Office, Welding, Communication.

Description :

    1. Fitted up and Flux core weld roller coaster ride rails, support beams, heavy structural.
    2. Worked off blueprints to ensure correct placement and location.
    3. Welded on mining equipment Worked regularly using 3/32 and 0.52 flux core wires, multipass and back gouging Performed VT & UT testing Team lead.
    4. Assembled, and set pressure on hydraulic hoists, weld dumb bodies to hoists.
    5. Prepared and welded all components of carbon steel poles, varying in size, to be assembled into one unit; Maintained welding machine and flux core.
    6. Experienced in oxy- acetylene, cutting, torch, carbon arc, and plasma cutting.
    7. Built log trailers, lowboys, etc.
Years of Experience
Experience
2-5 Years
Experience Level
Level
Executive
Education
Education
High School Diploma

Flux Core Welder Resume

Objective : Motivated and highly productive Flux Core Welder professional with a research background. Detail-oriented with strong skills in multi-tasking and efficient management of day-to-day office operations. Adept at building and maintaining effective working relationships with co-workers and interpersonal skills.

Skills : Weld Operatate Forklift, Overhead Crane, CPR., QA 1, Welding, Mechanical Pipefitting.

Description :

    1. Transferred to an On the job training program for welding.
    2. Examined workpieces for defects and measured workpieces with straightedges or templates to ensure conformance with specifications.
    3. Identified and adhered to the appropriate Weld Procedure for the task at hand.
    4. Provided quality welds that meet specifications and approval of the Quality Control Inspector and Production Manager. This includes, but is not limited to, proper weld size, weld profile, cleaning, preheating, etc.
    5. Completed any relevant specific job duties as required by the immediate supervisor.
    6. Trained new welders on machinery operations and company policy and procedure Adhered to all safety rules and regulations and guidelines.
    7. Fabricated large and small parts per drawing and assembled parts as required.
                Years of Experience
                Experience
                2-5 Years
                Experience Level
                Level
                Executive
                Education
                Education
                High School Diploma

                Flux Core Welder Resume

                Objective : Highly skilled and experienced combo welder. Over 10 years' experience in machinery, fixture, and conveyor builds. Skilled with precision instruments and tools. Blueprint reading. Experience in building pressure vessels, tanker trucks, furnaces, oil rig machinery, solar panel frames, robotics, and a variety of machinery.

                Skills : MS Office, Communication Skills, Welding.

                Description :

                  1. Operated Flux Core inner shield welders.
                  2. Skilled with welding brass, nickel, and 7018.
                  3. Analyzed workpieces for defects and measure workpieces with straightedges or templates to ensure conformance with specifications.
                  4. Read and paraphrased blueprints or welding process specifications.
                  5. Operated flux core welder to produce parts/products.
                  6. Interpreted blueprints and followed specific measurements in order to assemble machinery parts.
                  7. Trained new welders on machinery operations and company policy and procedure.
                Years of Experience
                Experience
                2-5 Years
                Experience Level
                Level
                Executive
                Education
                Education
                High School Diploma

                Flux Core Welder Resume

                Objective : MIG, Flux Core, Stick and ARC Welder with 10 + years of welding experience. Proficient welder with strong, hands on expertise in all facets of welding process. Expertise with any metal frames, filing gaps or holes and repairing mechanical parts. Proven highly productive even under pressure and dedication to job hard work and responsibility.

                Skills : Assisting, Assembling, Planning.

                Description :

                  1. Read and interpreted blueprints and weld procedures.
                  2. Inspected complete welds for any defects and clean weld using brushes and grinders.
                  3. Worked Knowledge of welding in all positions and different rods.
                  4. Operated grinder and overhead cranes to move products.
                  5. Utilized a wide range of welding wires in Flux core.
                  6. Promoted safe work practice.
                  7. Conducted visual periodic measurement inspections of parts and products to maintain safety and quality guidelines.
                Years of Experience
                Experience
                2-5 Years
                Experience Level
                Level
                Executive
                Education
                Education
                Bachelor Degree

                Flux Core Welder Resume

                Objective : Seeking a Flux Core Welder position in the manufacturing field performing combination welding where I can utilize my training and experience. Ability Summary Trained in all areas of Mig, Tig, Arc, Flux core, Stainless, Aluminum, SMAW, and Intershield. Over fifteen years of experience as a welder. Able to read and interpret welding symbols.

                Skills : Combination Welder, Gas Turbine Mechanic, Maintenance Mechanic, Auto Mechanic.

                Description :

                  1. Responsible for welding recycling units.
                  2. Performed a pre-heated technique to remove moisture from material.
                  3. Duties also included horizontal, vertical, and overhead welding Responsible for operating all equipment, including CNC equipment, grinder, drills, sheer cutters, etc.
                  4. Responsible for reading blueprints, perform measurement conversions.
                  5. Recognized, set up, and operated hand and power tools common to the welding trade, such as shielded metal arc and gas metal arc welding equipment.
                  6. Confirmed temporary bracing is installed as needed to avoid distortion and remove bracing when complete.
                  7. Operated punches, grinders, drills, saws, oxy-fuel torches, plasma cutters, and other basic equipment & hand tools.
                Years of Experience
                Experience
                2-5 Years
                Experience Level
                Level
                Junior
                Education
                Education
                Bachelor Degree

                Flux Core Welder Resume

                Objective : As a Flux Core Welder, responsible for Used Arc-gouging techniques for repairing damaged pipe and repair with flux-core welding.

                Skills : Forklift Operator, Welding, Forklift Driver, Front-end Loader.

                Description :

                  1. Used a huck gun to bolt it down.
                  2. Helped build the ladders that they positioned and bolted onto the car.
                  3. Moved and/or organized material as needed to support production tasks.
                  4. Maintained a clean and orderly workstation.
                  5. Welded and fitted columns and beams using 1/16 to 3/32 wire dual shield flux core Skills Used welding, grinding, cutting, fitting, reading blue.
                  6. Worked with the company in Korea on the BGT project.
                  7. Built earth moving equipment.
                Years of Experience
                Experience
                2-5 Years
                Experience Level
                Level
                Executive
                Education
                Education
                GED

                Flux Core Welder Resume

                Objective : Flux Core Welder professional with additional experience in team supervision and problem-solving. A born leader; able to supervise a team of up to 100 employees. Strengths include employee training and compliance with management. Always willing to adapt, learn new processes, and embrace change. Highly effective in reaching company goals.

                Skills : MIG Welder, Flux Core Welder, Stick Welder.

                Description :

                  1. Welded body of transport and fishing vessels Certified for vertical and overhead welds Atmospheric air quality tester in confined areas.
                  2. Experienced in heavy structural fabrication.
                  3. Manually supported and guided weld gun along weld joints.
                  4. Maintained quality and safety standards.
                  5. Performed other tasks. 2nd shift openings at our client in Southern Milwaukee County, WI.
                  6. Repaired, welded, and performed maintenance on railcars.
                  7. Prepared inserts to be welded, preparing root pass by cleaning bevel, and hanging ceramic tape it could be flats, or vertical, or horizontal, making.
                Years of Experience
                Experience
                2-5 Years
                Experience Level
                Level
                Executive
                Education
                Education
                GED