Welder Resume Samples

Description :

1. Vessels that were built with 100% x-ray welds with also visual inspection prior to pressure test.
2. Observing hydrostatic and dimension tolerance tests to evaluate weld quality and conformance to specifications.
3. Removing rough spots from workpieces with portable grinders, hand files, and scrapers.
4. Clamping, held, tack-welded, heat-bent, ground and bolted component parts to achieve required configurations and positions.
5. Setting up and operating hand and power tools, including shielded metal arc and gas metal arc welding equipment.
6. Bolting, clamping and tack-welding parts to secure components prior to welding.
7. Blew out machines, checked welding leads and wiring and changed filters for preventative maintenance.
8. Repairing manufactured products by dismantling, straitening, reshaping and reassembling parts.
9. Interpreting verbal and written instructions from work orders and welding blueprints.

Experience

5-7 Years

Level

Executive

Education

Diploma

Description :

1. Ignite torches or start power supplies and strike arcs by touching electrodes to metals being welded, completing electrical circuits.
2. Clamp, hold, tack-weld, heat-bend, grind or bolt component parts to obtain required configurations and positions for welding.
3. Operating manual or semi-automatic welding equipment to fuse metal segments, using processes such as gas tungsten arc, gas metal arc, flux-cored arc, plasma arc, shielded metal arc, resistance welding, and submerged arc welding.
4. Monitoring the fitting, burning, and welding processes to avoid overheating of parts or warping, shrinking distortion, or expansion of the material.
5. Examining workpieces for defects and measure workpieces with straightedges or templates to ensure conformance with specifications.
6. A chip or grind off excess weld, slag, or spatter, using hand scrapers or power chippers, portable grinders, or arc-cutting equipment.
7. Repairing products by dismantling, straightening, reshaping, and reassembling parts, using cutting torches, straightening presses, and hand tools.
8. Recognizing, set up, and operate hand and power tools common to the welding trade, such as shielded metal arc and gas metal arc welding equipment.
9. Marking or tagging material with the proper job number, piece marks, and other identifying marks as required.
10. Position and secure workpieces, using hoists, cranes, wire, and banding machines or hand tools.

Experience

10+ Years

Level

Management

Education

GED

Description :

1. Clamp, hold, tack weld, heat bend, grind or bolt component parts to obtain required configurations and positions for welding.

Experience

2-5 Years

Level

Junior

Education

Certification

Description :

1. Removed rough spots from workpieces with portable grinders, hand files, and scrapers.
2. Clamped, held, tack-welded, heat-bent, ground and bolted component parts to achieve required configurations and positions.
3. Detected faulty operation of equipment and defective materials and promptly resolved issues.
4. Set up and operated hand and power tools, including shielded metal arc and gas metal arc welding equipment.
5. Operated hoists, cranes and power tools to dismantle equipment to find and remove defective parts.
6. Bolted, clamped and tack-welded parts to secure components prior to welding.
7. Blew out machines, checked welding leads and wiring and changed filters for preventative maintenance.
8. Interpreted verbal and written instructions from work orders and welding blueprints.
9. Used MIG gun arc to melt and deposit metal from electrode to workpieces.
10. Maintained the correct length of arc and speed of movement to form specified depth of fusion and bead.

Experience

0-2 Years

Level

Entry Level

Education

Diploma

Description :

1. Layout, position, align, and secure parts and assemblies prior to assembly, using straightedges, combination squares, calipers, and rulers.
2. Examine workpieces for defects and measure workpieces with straightedges or templates to ensure conformance with specifications.
3. Recognize, set up, and operate hand and power tools common to the welding trade, such as shielded metal arc and gas metal arc welding equipment.
4. Weld separately or in combination, using aluminum, stainless steel, cast iron, and other alloys.
5. Clamp, hold, tack-weld, heat-bend, grind or bolt component parts to obtain required configurations and positions for welding.
6. Select and install torches, torch tips, filler rods, and flux, according to welding chart specifications or types and thicknesses of metals.
7. Ignite torches or start power supplies and strike arcs by touching electrodes to metals being welded, completing electrical circuits.
8. Connect and turn regulator valves to activate and adjust gas flow and pressure so that desired flames are obtained.
9. Served as the "go to" resource for junior employees seeking guidance on advanced welding and fabrication techniques.
10. Welded components in flat, vertical or overhead positions; worked from blueprints; accurately examined and measured workpieces for defects.

Experience

0-2 Years

Level

Entry Level

Education

Diploma

Description :

1. Trained new hi-lo operators on proper safety protocol and standards for daily operation at our facility.
2. Continually supplied needed materials to production lines so as to meet daily production numbers.
3. General labor and production/line management worked in various processes and positions daily to maintain efficient production.
4. Maintained line equipment and performed basic repairs/maintenance on machinery.
5. Implemented new practices to make production lines more efficient, along with training to ensure practices were continuous and ongoing.
6. Production welder MIG welded in accordance with current manufacturing standards and practices.
7. Maintained and performed self-inspection of parts for quality assurance.
8. Ignite torches or start power supplies and strike arcs by touching electrodes to metals being welded, completing electrical circuits.
9. Detect faulty operation of equipment or defective materials and notify supervisors.

Experience

10+ Years

Level

Management

Education

GED

Description :

1. Heated, formed, and dressed metal parts with hand tools, torch, and arc welding equipment.
2. Monitoring the fitting, burning, and welding processes to avoid overheating parts, warping, shrinking, distortion, and expansion of materials.
3. Setting up equipment and welded parts according to welding chart specifications and type.
4. Positioning and clamp workpieces together, and properly assembled them in jigs and fixtures.
5. Preparing broken parts for welding by properly grooving and scarfing surfaces.
6. Adjusting the weld machines to the correct settings prior to weld applications.
7. Successfully completed advanced certifications, and was ranked within top of the class for completion time and skill for each class.
8. Chosen to travel to Milwaukee, wi for training in tank test, inspection, and repair.
9. Welded in all positions with. 045 &. 062 FCAW to incredibly high-quality standards.
10. Accurate submission of required weld history and WMS database information.

Experience

10+ Years

Level

Senior

Education

Diploma

Description :

1. General dynamics land systems Ladson, SC efficient in welding prefabricated parts to armored vehicles to consistently meet daily production goals.
2. Accurately selected equipment and planned layouts for truck assembly, applying knowledge of geometry, and other forms of measuring.
3. Bolted, clamped and tack-welded parts, using arc, gas-shielded arc, submerged arc, and gas welding equipment.
4. Reworked and repaired returning vehicles by dismantling and also reassembling parts with cutting torches and various forms of welding.
5. Certified in iso 9001 and ISO 14001 to ensure safety standards including environmental awareness, hazardous waste disposal, electrical composition and proper PPE's used.
6. Effectively coordinated with outside departments when needed to installing vehicle wiring, seating, engines, cameras, etc.
7. Assembling parts for integrating trucks from fabrication too the finishing department assembly of parts for a robotic claw helped tape up and sand trucks to get them prepared for paint department.
8. Set up equipment and welded parts according to welding chart specifications and type.
9. Most parts are moved around with overhead cranes or jib cranes due to the size of the parts.
10. Set up and operated stress relief oven adhering to welding procedure parameters.

Experience

10+ Years

Level

Senior

Education

Diploma

Description :

1. Cutting and joining metal parts for fabricating or repairing vehicle equipment, furniture, tools, and various other articles, applying tools like plasma cutter, arc welder, chop saw, oxyacetylene torch, etc.
2. Knowledge of safety precautions related to occupational hazards, procedures, and practices of my trade.
3. Designing and fabricating the equipment and parts for meeting the special or unusual needs, using the manufacturer specifications, calculator, measuring devices, drawings, etc.
4. Installing or removing any special equipment like paint machine, grinder, power and hand tools, etc.
5. Designing and creating holding jigs that aid in the fabrication of the parts in various numbers.
6. Maintaining a record of all the work completed so as to facilitate the accounting activities.
7. Maintaining routine inventory supplies that are used for operating the welding unit via inspection of stocks and ordering fresh stock as and when required.
8. Using hand tools and precision measuring instruments, templates, and fixtures to measure dimensions of finished workpieces.
9. Welding metal parts with gas welding equipment as specified by layout, welding diagram, or work order.
10. Trained numerous employees in several complex fitting and welding processes.

Experience

10+ Years

Level

Senior

Education

GED

Description :

1. Responsibilities: weld with several welding processes, grind, and cut rail.
2. Complying with the company and federal safety rules, policies and procedures - wear required safety equipment, respond to and act on safety concerns.
3. Lift/carry track material, cut brush, trees, and vegetation, and clear litter and cargo spillage.
4. Pulling spikes from ties, drill holes in rail to insert bolts, and fit bolts; remove/replace the ballast.
5. Operating large non-power tools: shovels, picks, axes, cutters, sledgehammers; electric, pneumatic, hydraulic tools: drills, impact wrenches, jacks, power saws, grinders; cut rail, manually compress ballast, remove/install ties; lift, roll, adjust rails; and lift/carry track material with assistance.
6. Ensuring proper truck and equipment maintenance; submit required paperwork for truck repairs or welding equipment; order material: welding supplies, grinding stones, reports, safety equipment; maintain records and time sheets.
7. Preparing all material surfaces to be welded, ensuring that there is no loose or thick scale, slag, rust, moisture, grease, or other foreign matter.
8. Repairing products by dismantling, straightening, reshaping, and reassembling parts, using cutting torches, straightening presses, and hand tools.
9. A chip or grind off excess weld, slag, or spatter, using hand scrapers or power chippers, portable grinders, or arc-cutting equipment.
10. Mark or tag material with the proper job number, piece marks, and other identifying marks as required.

Experience

5-7 Years

Level

Executive

Education

Certification