Hardware Engineer Resume Samples

Description :

1. Contributed to the bring-up of the next-generation servers, and managed the current generation of low range, midrange, and mainframe server family virtually and with real hardware.
2. Integrated new hardware and firmware for processors and integrated new features into the system.
3. Managed technical support for current low range, midrange and mainframe server for multilevel departments.
4. Verified and resolved, communication and design problems between multiple high-speed chips.
5. Designed test cases to fully stress advance features in IBM servers, such as power-saving features, and live hardware replacement (concurrent maintenance).
6. Recognized by peers as having a unique ability to assume difficult assignments and meet critical schedules and having strong technical and analytical skills.
7. Utilized oscilloscopes and logic analyzers to debug various complex chip and system problems that had not been resolved for a long period of time Recreate field defects in a lab environment.

Experience

10+ Years

Level

Senior

Education

Electrical Engineering

Description :

1. Performed architecture, design, and documentation of 2 generations of Intel Atom Processor validation motherboards.
2. Teamed with geographically dispersed marketing teams and Validation / mechanical / simulation / BIOS engineers.
3. Compiled, analyzed, and defined requirements.
4. Identified and resolved key design issues to ensure full functionality and compliance with product requirements.
5. Selected Achievements: Built highly scalable lead motherboard for developing Atom Processor, enabling full duplication while decreasing cost and time to market.
6. Maintained high levels of product stability/reliability through skillful management of the development lifecycle and definition of repeatable process methodologies.
7. Complete technical documentation and drawings Ordering hardware to project deliveries Follow-up project plans/deliveries Handling classification related tasks Assist project managers in daily tasks Participate in 24-hour duty phone assisting customers/ employees with field-related issues.
   

Experience

5-7 Years

Level

Executive

Education

Computer Engineering

Description :

1. Managed two projects for the DoD BIMA that designed and tested operational implementations of physical access control system environments for DoD blue force personnel.
2. Managed $250K effort to upgrade the US Northern Command's existing physical access control system to include a secure and integrated biometric authentication solution for 3factor access to their sensitive command center site.
   
3. Researched customer policies and guidelines regarding physical access control and information security constraints for IT infrastructure installations for coordinated, a system to system communication architecture and information exchange.
4. Supported a solution to the wireless bandwidth limitations facing DoD special operations forces operating mobile biometrics devices in theater, which required the identification of enemy personnel in the field at the point of encounter.
5. Tested a range of mobile biometric devices with various military radios and satellite communication systems (e.g.
6. To analyzes the transfer speeds of a biometric file through a variety of wireless communications channels.
7. Integrated mobile collection devices with complementary communication technologies to analyze recorded efficiencies.

Experience

5-7 Years

Level

Executive

Education

Computer Engineering

Description :

1. Designed linear and switching power supplies and associated sub-circuits for system design.
2. Developed and submitted schematics and layouts for multi-layer high-speed PCB for products.
3. Maintained system documentation of the entire PCB layout, guidelines for the design for mfg.
4. Implemented a layout process in coordination with manufacturers, suppliers, and clients.
5. Ensured layout design compliance with IPC standards and manufacturing requirements.
6. Performed functional testing of the various power supply sections and subsystems.
7. Designed an Integrated Power Supply from Specification to Schematic using PADS Prototyped Design.
8. Department Director of research and development staff level coordinator hard drive division.

Experience

5-7 Years

Level

Executive

Education

B.E. In Electronics

Description :

1. Performed isolate faults, analyze and categorize failures with debugging methods of Hard Disc Drive, Optical Disc Drive, Mechanical, Audio, and Video in the XBOX 360 console.
2. Implement test cases, test plan, and propose next level of failure analysis.
3. Vendors' black box and independence test tools validation.
4. Analyze and investigate test scripts in the performance tests.
5. Investigate and resolve issues related to No Fault Found (NFF).
6. Developed test techniques and data backup as evidence to support new finding Simplified fail isolation flow process in production line then implement and release flow chart base upon error codes Initiated drives triage to instruct (R&R) to perform failures isolation.
7. Performed data query and transform to graphical analysis in Power Pivot and Water Fall for Data Analyst Collaborated with Contract Manufacturers (Foxconn and Flextronics) and Hard Disc Drive OEMs vendors.
8. Trained Production Engineers in fault isolation and failure analysis.

Experience

5-7 Years

Level

Executive

Education

Bachelor Of Science

Description :

1. Developed integrated design solutions in close collaboration with the customer, analyzing current systems and engineering innovative and appropriate solutions.
2. Oversaw requirements database creation/administration, requirements management and change control processes with a focus on enabling new technologies and influencing key customers.
3. Streamlined development processes and improved productivity through effective reporting, prioritization and customer communications.
4. Collaborated with external customers and hardware vendors to successfully resolve critical issues slowing product launch; eliminated costly delays and won a Division Recognition Award.
5. Conducted analysis and risk assessments; recommended risk mitigation strategies.
6. Created a DOORS database for 100+ users on a software design project with 3K+ requirements; customized an exporting tool to increase productivity by 50%.
7. Managed distribution of 1.3K customer reference boards to 40 external vendors.
8. Spearheaded an enabling effort for new hardware feature support with internal teams and external vendors; cutting-edge features launched on-time and on-budget for all product lines.

Experience

10+ Years

Level

Senior

Education

Master Of Science

Description :

1. Develops designs for the installation of components and assemblies into chassis, racks, cabinets, workstations, customer facilities, and/or shelters.
2. Plans direct, reviews and coordinates preparation of project documentation to ensure customer contract and company requirements are met.
3. Prepares specifications, evaluates vendors, and analyzes test reports.
4. Managing, regulating, coordinating, or otherwise exercise control over supplies, equipment, or other medical material of the section designed to respond to a variety of biological, chemical, or radiological agents.
5. Conducting quality assurance and quality control to ensure partners or state agencies adequately maintain inventories.
   
6. Checked errors and debugged the schematic and layout design of laptops by using Cadence Participated in the Lenovo hardware training program.
   
7. Respond to end-user service requests, RMA request and expediently resolve trouble tickets to maximize system up-time.

Experience

2-5 Years

Level

Executive

Education

Electronic Engineering

Description :

1. Installed, maintained, repaired, overhauled, modifies, and tested various types of IT-related components.
2. Prepared operating and malfunction reports and related documentation; worked with engineering staff to determine and solve equipment design problems.
3. Hardware Engineer/Site Lead/Logistics Manager; GS-13E (Iraq/Kuwait) Site Lead in 2 Locations in Iraq before becoming Logistics Manager.
4. Managed all supply distribution to remote sites, and organized the Program withdrawal of all equipment.
5. Provided project management with software/hardware and reports.
6. Used experience of terminating and testing RF and LAN cables for troubleshooting, upgrading requirement input, performing modifications to current equipment, and developed own approach to solutions.
7. Applies knowledge of common design and drafting principles, guidelines, specifications, and standards to create basic electronic layouts, sketches, models, and drawings using VISIO.

Experience

5-7 Years

Level

Executive

Education

Information Technology

Description :

1. Designed and built various interface circuitry for embedded controller.
2. Performed AC, DC, worst case analysis, and analyzed circuits in analog and frequency domain.
3. Performed circuit analysis and simulations using CAD programs such as Spice, Multisim, Simscape, and MATLAB along with manual techniques.
4. Assisted senior design engineers in the design, debug, evaluation and characterization of analog, digital, embedded systems, and interface circuitry.
5. Designed and built an electronic bench/simulator for ECU I/O functional and validation test.
6. Designed and implemented automated testing tools and programs addressing areas including database impacts, software scenarios, regression testing, negative testing, error/bug retests and usability.
7. Designed hardware, firmware and software to collect, analyze, and condition RF wave signal (radar) for sensing and controlling products using variety of 8/16-bit Microchip microcontrollers.
8. Built in house automotive test stands for various software testing and validation for current and developmental products.

Experience

7-10 Years

Level

Management

Education

Electrical Engineering

Description :

1. Responsible for designing a robust tool platform to replace aging desktop scanner systems.
2. Performed optical layout, selected motion control system, designed all mechanical fixturing, created high-level electrical specifications and worked with safety groups to ensure the system met the company and national safety standards.
   
3. Applied Agile methodology to increase design productivity and customer satisfaction.
4. Used Matlab and LabVIEW to acquire and analyze data.
5. Responsible for maintaining the quality of production line optical metrology tools.
6. Efforts involved using standardized troubleshooting methodologies, making design changes, employing NIST traceable standards, and monitoring quality to ensure tools met performance specifications.
7. Characterized tools using laser interferometers and ran repeatability and reproducibility analysis to quantify variability.

Experience

10+ Years

Level

Senior

Education

MSME

Description :

1. Developed hardware platforms for several automotive "Telematics" controllers.
2. Participated in design of digital core of the controllers as well as functional blocks, such as power supplies, discrete and analog input/output drivers.
3. My development responsibilities included circuit design and schematic development, using Mentor Graphics software; worst case analysis using PSpice and Mentor Graphics Saber simulators; bring up of the prototype boards, and board level tests.
4. Used C and assembly to develop embedded test code to support hardware board level tests.
5. Used C++ to develop menu driven PC test programs that would communicate to the hardware controller under test over the standard PC RS232 serial port.
6. Created QBasic programs and utilized LabWindows GPIB interface libraries to control lab equipment such as programmable power supplies, signal generators and environmental chambers.
7. Conducted bench and vehicle test utilizing the test environment that I helped to develop.

Experience

10+ Years

Level

Senior

Education

Electrical Engineering