HVAC Engineer Resume Samples

Description :

1. Ability to insure company property, vehicles, and tools are being properly used, maintained, and accounted for.
2. Demonstrated best practices to ensure that the company vehicle is properly stocked, return defective warranty parts to branch, and orders/replenishes vehicle stock as needed.
3. Daily hands-on experienced with Trane, Carrier, Rheem & Goodman to include heat pump units.
4. Daily multimeter readings of voltage, amps, ohms.
5. Installed split unit systems, forced air furnaces, residential & commercial central air systems.
6. Performed Preventive Maintenance, Pump Downs.
7. Experienced in replacing A-coil, condenser, line set, filter driers, control boards, heating elements, transformers, valve stems, low & high side service ports, thermostats, fan motors, squirrel cage, capacitors, igniters, contactors, door switches, sensors, reversing valve, condenser fan assembly.
8. Experienced building plenums & cabinets.
9. Ability to designs, fabricates and installs various ducts and duct fittings as required.

Experience

10+ Years

Level

Senior

Education

Vocational

Description :

1. Collaborated to implement operating procedures.
2. Generated bill of materials.
3. Resolved malfunctions.
4. Organized tasks.
5. Developed schedules.
6. Tracked progress.
7. Read and interpreted blueprints, technical drawings, schematics.
8. Provided technical support.
9. Coordinated fabrication of equipment.

Experience

7-10 Years

Level

Management

Education

BS In Mechanical Engineering

Description :

1. Trained and managed maintenance personnel and subcontractors.
2. Repaired or service heating, ventilating, and air conditioning (HVAC) systems to improve efficiency, such as by changing filters, cleaning ducts, or refilling non-toxic refrigerants.
3. Installed or repaired air purification systems, such as specialized filters or ultraviolet (UV) light purification systems.
4. Assisted with other work in coordination with repair and maintenance teams.
5. Generated work orders that address deficiencies in need of correction.
6. Studied blueprints, design specifications, and manufacturers' recommendations to ascertain the configuration of heating or cooling equipment components and to ensure the proper installation of components.
7. Discussed heating-cooling system malfunctions with users to isolate problems or to verify that malfunctions have been corrected.
8. Recommended, developed, or performed preventive or general maintenance procedures, such as cleaning, power-washing, or vacuuming equipment, oiling parts, or changing filters.
9. Installed auxiliary components to heating-cooling equipment, such as expansion and discharge valves, air ducts, pipes, blowers, dampers, flues, and stokers, following blueprints.

Experience

7-10 Years

Level

Management

Education

License In Leadership

Description :

1. Reviewed for the correctness and approved contract documents including HVAC flow diagrams, issued for construction drawings, material data submittals, contractor method statements, and procedures.
2. Informed mechanical contractors and EPCM construction management of any deficiencies before mentioned.
3. Verified all materials submitted for purchase by contractors were in compliance with client specification requirements and were cost-effective.
4. Supported the contractor's construction activities by researching and responding to requests for information that involved clarification of design as related to construction or design modification activities.
5. Responsible for review and approval of design modification HVAC plans, sections, and schematics.
6. Supported and was responsible for daily coordination with the contractor supervision/management team to verify the readiness of buildings prior to the installation of HVAC equipment.
7. Planned and attended technical and progress track meetings with clients and contractors.
8. Coordinated and witnessed pre-commissioning and commissioning activities to verify and ensure full compliance with established procedure and client specifications.

Experience

2-5 Years

Level

Junior

Education

BS In Mechanical Engineering

Description :

1. Reviewed all current and future service contracts with service providers to ensure our contracts provide our business with the highest level of service in the most cost-effective manner.
2. Negotiated all pricing of service contracts for all of our facility operations.
3. Wrote and reviewed all building operation procedures to ensure they comply with our business objectives and all local and state building regulations.
4. Assisted department directors and project managers in designing floor plans for Continuous Improvement Initiatives.
5. Designed floor plans that will help meet their objectives for better interaction with team members as well as meeting all fire and safety codes.
6. Used AUTOCAD programs for designing floor plans as well as maintaining all building floor plans.
7. Facilitated all phases of construction projects from acquiring documents, getting bids for services, supervise work performed, and am active in final inspection to ensure all work performed was to contract and our approval.
8. Monitored all facility utility operations to ensure we have reliable services for our Data Centers.
9. Utility operations include utility power, backup power generation systems, Uninterruptable Power Systems, fire suppression systems, and security systems.

Experience

5-7 Years

Level

Executive

Education

Diploma

Description :

1. Completed daily inventories of supplies and equipment.
2. Supplied and returned temperatures on chillers daily Performed PMs on evaporating or rooms by changing out filters Created a database of all equipment models and serial numbers.
3. Designed and installed air conditioning duct units.
4. Performed fire alarm system installation and repair.
5. Supplied technical support to customers.
6. Repaired and replaced motors, bearings, and belts.
7. Evaluated the status of refrigeration liquids for safety and compliance purposes.
8. Monitored building environmental conditions, including adjusting thermostats, terminal units, and mixing boxes.
9. Calibrated permanent and portable environmental monitoring equipment.

Experience

7-10 Years

Level

Management

Education

Diploma In General Study

Description :

1. Responsible for a 450-unit condo complex as well as a central plant for heat and hot water.
2. Performed preventative maintenance such as greasing motors, replacing belts, changing filters, and cleaning coils.
3. Diagnosed equipment failures with residential AC units, fire tube boilers, hot water pumps, high and low voltage circuits, heat coils, and fan motors.
4. Responsible for programming, diagnostics, repairing, installation, and integration of computerized network energy management system, as well as daily reports and configuration changes.
5. Used schematics and multi-meter to trace voltage problems.
6. Used a wide variety of tools for repairing and replacing compressors, motors, relays, transformers, contactors, evaporator coils, and heat coils.
7. Responsible for ordering a complete inventory of stock parts and fuel oil for boilers.
8. Experienced with all torches, soldering guns, power tools, pneumatic tools, and heavy plumbing equipment.
9. Interacted with residents, vendors, instructors, emergency services, and board of directors.

Experience

7-10 Years

Level

Management

Education

Diploma

Description :

1. Determined changes in dimensional requirements of parts by inspecting used parts; used rules, calipers, micrometers, and other measuring instruments Controls downtime by informing production workers of routine preventive maintenance techniques; monitored compliance.
2. Fabricated repair parts by using machine shop instrumentation and equipment.
3. Maintained equipment, parts, and supplies inventories by checking stock to determine inventory level; anticipated needed equipment, parts, and supplies; placed and expediting orders; verified receipt.
4. Conserved maintenance resources by using equipment and supplies as needed to accomplish job results.
5. Provided mechanical maintenance information by answering questions and requests.
6. Prepared mechanical maintenance reports by collecting, analyzing, and summarizing information and trends.
7. Maintained technical knowledge by attending educational workshops; reviewing technical publications; establishing personal networks.
8. Ability to easily lift heavy objects, all equipment, and materials as the job may require.

Experience

5-7 Years

Level

Executive

Education

Diploma

Description :

1. Reviewed the history and science behind growing, producing.
2. Provided design and consulting services for Heating, Ventilation, & Air roasting, extracting and manipulating Conditioning, Plumbing, Electrical, and Fire Protection systems for high- coffee.
3. Prepared espresso-based beverages end residential homes, multi-family residential new construction, retail with emphasis on dialing in to cultivate tenants, and educational and religious facilities.
4. Managed design team the particular notes and qualities of each and delegated responsibilities to CAD draftsmen and interns.
5. Performed coffee.
6. Composed latte art for espresso thermal load calculations and provided equipment selection for Air-based beverages to highlight the qualities of Conditioning and Heating systems.
7. Interacted with clients, architects, the product in an aesthetically pleasing and contractors during site surveys, site meetings, and constructive manner.

Experience

5-7 Years

Level

Executive

Education

Engineering

Description :

1. Responded in a professional, polite, and helpful manner when interacting with residents.
2. Installed air condition units indoors and outdoors; heat pumps; ductwork; electrical wiring and brazed piping.
3. Performed maintenance on air handling units and chillers distribution systems.
4. Installed thermostats and assisted with repair and maintenance of plumbing, electrical, HVAC, and other systems or structure.
5. Ensured repairs to equipment and facilities are performed in a neat workmanship-like manner.
6. Documented and reported problems and maintained company logs and reports.
7. Maintained inventories, requisition materials, tools, and supplies needed to complete each job.

Experience

2-5 Years

Level

Junior

Education

General Equivalency Diploma In MICHAEL D. LATNEY