An Injection Molding Supervisor is hired to direct a small team of molding associates in the areas of scheduling, production, safety and maintenance, and quality. Typical work activities listed on the Injection Molding Supervisor Resume mentions the following – troubleshooting and adjusting molding parameters and maintaining quality and maximum product output; leading the team in the execution of daily production tasks, and training, maintenance and in continuous improvement, performing problem-solving tasks to develop corrective actions for customers’ issues, and coordinating tooling and equipment availability, repair and maintenance.
To work in this capacity, the following skills are needed – the ability to respond to emergencies; knowledge of adhering to company policies, and good housekeeping practices, sound decision-making skills; and continuous improvement experience within the manufacturing environment. A diploma in a relevant field is often seen on eligible resumes.
Headline : Accomplished Injection Molding Supervisor with over 7 years of experience in optimizing production processes and enhancing team performance. Proven expertise in ensuring safety, quality control, and continuous improvement within fast-paced manufacturing environments. Committed to driving operational excellence and fostering a culture of teamwork and accountability.
Skills : Production Team Leadership, Advanced Ms Office Proficiency, Injection Molding Machine Operation, Effective Time Management
Description :
Ensured adherence to safety protocols while maintaining a clean and organized work environment.
Supervised a diverse team of production employees, including maintenance and team leaders, fostering collaboration and efficiency.
Monitored and optimized the performance of injection molding equipment and processes.
Implemented quality assurance measures to uphold product specifications and standards.
Conducted performance evaluations and facilitated employee development plans.
Documented employee performance metrics to identify training needs and opportunities for growth.
Trained employees on company policies, ensuring compliance and understanding of operational procedures.
Experience
5-7 Years
Level
Management
Education
B.S. in Mfg. Eng.
Senior Injection Molding Supervisor Resume
Summary : Dynamic Injection Molding Supervisor with 10 years of hands-on experience in optimizing production efficiency and driving team success. Expertise in implementing quality control measures, enhancing safety protocols, and fostering a culture of continuous improvement in high-volume manufacturing environments. Passionate about leading teams to achieve operational excellence and meet production targets.
Skills : Office Management, Workflow Management, Microsoft Excel, Production Planning, Safety Compliance
Description :
Managed a team of 11 employees in the storage and processing department of a wallboard manufacturing facility.
Scheduled and coordinated barge and truck unloading, ensuring timely storage and blending of raw materials for consistent quality.
Oversaw a project for reclaiming plant waste as raw material, significantly reducing costs.
Directed preventative maintenance and repair operations for all heavy equipment and process machinery.
Addressed employee concerns promptly, fostering a positive workplace environment.
Ensured compliance with safety, health, and environmental regulations across all operations.
Collaborated with logistics teams to resolve delivery challenges efficiently.
Experience
7-10 Years
Level
Senior
Education
B.S. in Manuf. Eng.
Injection Molding Supervisor Resume
Summary : Innovative Injection Molding Supervisor with a decade of experience in leading high-performing teams and enhancing production workflows. Expertise in implementing safety standards, optimizing quality control, and driving continuous improvement initiatives in dynamic manufacturing settings. Dedicated to cultivating a collaborative work culture and achieving operational excellence.
Skills : Manufacturing Management, Supplier Coordination, Employee Supervision, Change Management, Production Scheduling, Technical Support
Description :
Oversaw daily shift operations and ensured production targets were met.
Generated comprehensive production reports and monitored employee performance.
Provided hands-on support to operators during machine setup and troubleshooting.
Fostered teamwork and collaboration to enhance operational efficiency.
Implemented new policies to improve safety and productivity standards.
Trained staff on operating 100-500 ton injection molding machines.
Collaborated with engineering on tooling design and optimization.
Experience
10+ Years
Level
Management
Education
B.S. in Mfg Eng.
Junior Injection Molding Supervisor Resume
Objective : Dedicated Junior Injection Molding Supervisor with 5 years of experience in streamlining production operations and enhancing team efficiency. Skilled in overseeing quality assurance, implementing safety protocols, and fostering a culture of continuous improvement. Eager to leverage expertise to drive productivity and support operational goals in a dynamic manufacturing environment.
Skills : Machine Maintenance, Process Improvement, Inventory Management, Quick Changeover Techniques, Lean Manufacturing, Process Optimization
Description :
Set up and calibrated injection molding machines to ensure optimal performance.
Recruited, trained, and supervised a skilled team of technicians.
Developed and implemented an on-the-job training program for new hires.
Established a motivated production team that consistently met high-quality standards.
Collaborated with maintenance teams to troubleshoot and resolve equipment issues.
Created job-specific process preparation checklists to enhance efficiency.
Identified and executed improvement opportunities within the production department.
Experience
2-5 Years
Level
Junior
Education
B.S. Manufacturing Eng.
Injection Molding Supervisor Resume
Objective : Results-focused Injection Molding Supervisor with 2 years of experience in managing production operations and enhancing team effectiveness. Skilled in implementing safety standards, optimizing processes, and ensuring quality control in injection molding environments. Eager to contribute to operational success and foster a culture of continuous improvement.
Skills : Mechanical Engineering, Regulatory Compliance, Technical Documentation, Equipment Calibration, Process Monitoring, Inventory Control
Description :
Oversee daily operations of injection molding processes to ensure efficiency and quality.
Oversaw equipment maintenance and managed budgeting and purchasing effectively.
Manage a team of operators, providing training and performance evaluations.
Implement and maintain safety protocols to ensure a safe working environment.
Processed changes to optimize cycle times and improve production efficiency.
Collaborated with cross-functional teams to resolve production issues and enhance workflow.
Monitored and analyzed production metrics to drive continuous improvement initiatives.
Experience
0-2 Years
Level
Entry Level
Education
AAS
Assistant Injection Molding Supervisor Resume
Objective : Driven Assistant Injection Molding Supervisor with 5 years of experience in enhancing production efficiency and team performance. Skilled in implementing safety protocols, quality control measures, and continuous improvement strategies in manufacturing environments. Passionate about fostering a collaborative atmosphere and achieving operational excellence.
Skills : Production Management, Risk Assessment, Continuous Improvement, Cross-functional Collaboration
Description :
Oversaw the introduction of new tools and technologies to improve production efficiency.
Trained and mentored indirect labor, ensuring adherence to best practices.
Managed personnel and machine scheduling to optimize workflow.
Maintained a visible presence on the shop floor to support team members.
Coordinated and supervised production staff, fostering a culture of teamwork.
Implemented process improvements that enhanced operational performance.
Analyze production data to identify areas for improvement and cost reduction.
Experience
2-5 Years
Level
Executive
Education
B.S. in Mfg. Eng.
Injection Molding Supervisor Resume
Headline : Results-oriented Injection Molding Supervisor with 7 years of experience in enhancing production efficiency and team dynamics. Expertise in implementing quality assurance initiatives, streamlining processes, and adhering to safety standards in high-volume manufacturing. Focused on fostering a culture of continuous improvement and operational excellence to meet production goals.
Skills : Team Leadership, Six Sigma Methodology, Root Cause Analysis, Single-minute Exchange Of Die, Data Analysis, Project Management
Description :
Directed operations for a Tier 1 automotive injection molding department with 30 presses, ensuring adherence to quality and safety standards.
Supervised a team of 25 direct and 8 indirect employees, fostering a collaborative and accountable work environment.
Monitored injection molding processes to ensure production of high-quality automotive lighting assemblies.
Developed effective communication strategies for shift handoffs to enhance operational continuity.
Mentored team members in problem-solving techniques, reinforcing accountability and efficiency.
Scheduled press operations to align with production targets, ensuring timely delivery of customer orders.
Executed daily management tasks, focusing on maintenance, training, and continuous improvement efforts.
Experience
5-7 Years
Level
Senior
Education
B.S. ME
Associate Injection Molding Supervisor Resume
Summary : Results-oriented Injection Molding Supervisor with 10 years of proven experience in enhancing production quality and efficiency. Skilled in leading teams to implement best practices in safety and continuous improvement, while optimizing manufacturing workflows. Dedicated to driving operational success and fostering a high-performance culture that meets and exceeds production goals.
Skills : Injection Molding Techniques, Team Collaboration, Conflict Resolution, Statistical Process Control, Workplace Safety, Supplier Relations
Description :
Managed multiple shifts, ensuring smooth operations and high morale among team members.
Oversaw scheduling, safety protocols, and 5S initiatives to enhance workplace organization.
Developed and implemented a visual management system to streamline assembly processes.
Collaborated with clients to adapt packaging solutions, minimizing damage during shipping.
Actively participated in Continuous Improvement Teams, driving initiatives that engaged employees at all levels.
Supervised production across 42 injection molding machines, ensuring optimal performance.
Led a diverse team of up to 45 members, enhancing teamwork and productivity in the production area.
Experience
7-10 Years
Level
Executive
Education
B.S. in Mfg Eng.
Injection Molding Supervisor Resume
Objective : Results-driven Injection Molding Supervisor with over 7 years of experience in managing production teams and optimizing manufacturing processes. Proven track record in improving efficiency, reducing waste, and ensuring product quality. Strong leadership skills with a focus on safety and compliance. Adept at training staff and implementing best practices to enhance productivity and meet production targets.
Skills : Training & Development, Time Management, Problem Solving, Quality Control, Troubleshooting Skills, Injection Molding
Description :
Supervised a team of machine operators to ensure efficient and safe manufacturing processes.
Utilized extensive knowledge of manufacturing methods to implement cost reduction strategies.
Monitored daily productivity, line efficiencies, and key performance indicators to drive improvements.
Maximized product yields while minimizing waste and downtime through effective labor management.
Enhanced plant safety performance, resulting in improved audit scores and reduced incidents.
Directed training and scheduling of machine operators to optimize production flow.
Molded precision components using various resins, ensuring adherence to high-quality standards.
Experience
0-2 Years
Level
Fresher
Education
AAS
Injection Molding Supervisor Resume
Objective : Dedicated Injection Molding Supervisor with extensive experience in overseeing injection molding operations. Skilled in process optimization, quality control, and team leadership. Committed to maintaining high safety standards and fostering a collaborative work environment. Proficient in troubleshooting equipment issues and implementing continuous improvement initiatives to enhance operational efficiency.
Creating an account is free and takes five seconds.
You'll get access to the PDF version of this resume template.
Choose an option.
Sign up with Google
Sign up with Facebook
Sign up with Linkedin
This helps us make sure you're human and prevents spammers from abusing our services.
By continuing, you agree to our Privacy Policy and Terms.
Unlock the Power of Over 10,000 Resume Samples.
Take your job search to the next level with our extensive collection of 10,000+ resume samples. Find inspiration for your own resume and gain a competitive edge in your job search.
Get Hired Faster with Resume Assistant.
Make your resume shine with our Resume Assistant. You'll receive a real-time score as you edit, helping you to optimize your skills, experience, and achievements for the role you want.
Get Noticed with Resume Templates that Beat the ATS.
Get past the resume screeners with ease using our optimized templates. Our professional designs are tailored to beat the ATS and help you land your dream job.
Build an ATS-friendly Injection Molding Supervisor Resume
