PCB Design Engineer Resume Samples

A PCB Design Engineer provides technical guidance in developing new PCB designs and updating existing designs. The job description and duties listed on the PCB Design Engineer Resume are – developing PCB layouts, verifying existing designs, and recommending improvements, recommending new design concepts, validating the concept feasibility using circuit simulations; preparing design documentation, requirements specifications, and PCB models; preparing test specifications and test procedures; performing PCB design testing and analyzing test results; proposing process improvements to ensure PCB functionality and quality.

Employers seek those with the following skills – a good understanding of electronic circuit and measurement techniques; solid experience with PCB design and layout, schematic drawings skills, and solid experience with OrCAD. As far as formal education is concerned, a degree in computer science or a related field is required.

PCB Design Engineer Resume example

PCB Design Engineer Resume

Objective : PCB Design Engineer with nearly 5 years experience in analog and digital hardware design at the circuit board level. Extensive experience working in multisite, collaborative development environments. Companies included are IBM, Solectron and Nortel. In addition to schematic level circuit board design, extensive firsthand experience with physical implementation of designs including PCB layout and design for manufacture.

Skills : MS Office, Leadership.

Description :

    1. Knowledged of IPC Class 3 PCB Design requirements is helpful.
    2. Maintained of substrate or PCB design rules for all Apple products, as well as the technology roadmap and acceptability specification.
    3. Established and maintened of supplier site, material and technology qualification matrix.
    4. Provided mentorship to product designers on available substrate and printed circuit board technologies and materials.
    5. Interacted with and guide PCB layout designers to select layer structures, design rule sets and practices.
    6. Worked with design tool engineers to define and validate appropriate scripting, design rule checks, etc.
    7. Supported design for cost investigations as the liaison between engineering and procurement.
                          Years of Experience
                          Experience
                          2-5 Years
                          Experience Level
                          Level
                          Executive
                          Education
                          Education
                          MS


                          PCB Design Engineer Resume

                          Summary : Well-organized team player, effective communicator, and a self-starter. Possess a high degree of leadership, negotiation, mentoring, and consulting skills. Possess a degree in Electrical Engineering and CGP security clearance. 15 years of hands-on experience in PCB Layout Design (DxDesigner-PADS, OrCAD, and Protel).

                          Skills : IPC CID+, PCB Design, Electronics, CAD, DFM, DFT, Solidworks, PADS, Router, Valor, Dx Designer, CAM350, High-Speed Design, Orcad Schematic, Orcad Layout, Product Development, Agile.

                          Description :

                            1. Created Schematics in DxDesigner / OrCAD schematic and designed complex multilayer analog and digital boards having elements of high voltage, high speed and high density in PADS / OrCAD Layout.
                            2. Designed PCB for our Medical and Satellite Communications divisions.
                            3. Panelized boards using Gerbtools.
                            4. Modified existing PCB layouts.
                            5. Interacted with external vendors for PCB / ICT test fixture fabrication.
                            6. Good knowledged of the PCB fabrication process and materials used.
                            7. Interacted with design engineers in all divisions, attend DFM and DFT design reviews and interact with external subcontractors.
                          Years of Experience
                          Experience
                          10+ Years
                          Experience Level
                          Level
                          Senior
                          Education
                          Education
                          GED


                          PCB Design Engineer Resume

                          Summary : Experienced PCB Design Engineer with extensive Design experience in Schematic Capture, PCB Layout, Component, and Production Engineering.

                          Skills : Altium PCB Design Engineer, Electrical Engineer.

                          Description :

                            1. Responsible for design, layout, and development of microcontroller based control systems, working with a staff including 8 hardware/software engineers and 5 technicians to evaluate customer specifications, develop products, and bring these products through production.
                            2. Evaluated requirements, design PCB hardware, utilize Cad system to capture schematics, and design PC boards, test prototype systems, and follow products through production to assure quality of final product.
                            3. Initiated and completed over 1750 Schematics and PCB designs up to 6 layers utilizing Altium Designer for Windows Software.
                            4. Experienced in designing interfaces with SATA, USB, LVDS, I2C, and CanBus circuitry.
                            5. Designed Direction Signaling Device to produce Elevator Industry Standard sounds for use in ADA compliant systems that will work from 20VDC to 125VDC and from from 20VAC to 120VAC with minimal changes.
                            6. Designed a microcontroller based Elevator Position Display.
                            7. Developed procedures and test equipment for use in burn-in and life testing of assembled products.
                          Years of Experience
                          Experience
                          10+ Years
                          Experience Level
                          Level
                          Senior
                          Education
                          Education
                          B.S. In Electrical Engineering

                          PCB Design Engineer Resume

                          Headline : As a PCB Design Engineer, experienced in analog, high-speed digital, mixed-signal design, and RF, Experienced with all phases of design including thermal mitigation, impedance control, EMC, grounding, and PCB reliability.

                          Skills : Design For EMC Compliance, Altium Design System, Pads Logic Power PCB Design System.

                          Description :

                            1. Worked content Assessment and planning of new product stack; Components pre placement with the Hardware and mechanic engineers.
                            2. Performed routing and optimization of sensitive trace of BB and RF ; CAM Files output for PCB manufacturing factory, SMD Files output for SMD factory, with responsibility for the produce of mobile stage:EVT, DVT and PVT.
                            3. Responsible for the Footprint of compents based on the SPEC.
                            4. Participated in all aspects of product definition, development, testing, manufacture; etc.
                            5. Responsible for ensuring that products achieve the customers' requirements WORK EXPERIENCE (2).
                            6. Operated computer assisted engineering and design software such as Zuken CR5000 (Printed Circuit Board Work Station), Board Designer and knowledge in Allegro software.
                            7. Designed PCB layouts for office equipment, communications, PC-related technology, audio/video and appliances, vehicles, semiconductors.
                          Years of Experience
                          Experience
                          5-7 Years
                          Experience Level
                          Level
                          Junior
                          Education
                          Education
                          BA In Electronic Engineer

                          PCB Design Engineer Resume

                          Headline : Seeking the position of PCB layout designer in an organization where my training, skills, and experience can be utilized to the utmost potential. Self-oriented with a positive outlook, and a clear focus on the highest possible quality. Keen for new experience, responsibility, and accountability. Able to get on with others and be a team player.

                          Skills : MS Office, C++, Altium, Pad.

                          Description :

                            1. Designed multi-layered HAST/THB and HTOL BOARD.
                            2. Designed of Burn in boards, DUT Cards, Program Cards, Daughter Cards.
                            3. Designed of controlled impedance boards.
                            4. Fabricated and assembly drawings, manufacturing panels, pick-and-place data; Engineering change orders (ECOs) Generate Bill of materials (BOM) Gerber Generation.
                            5. Layouts and manual routes adhering to PCB design standards set by the customers and the company.
                            6. Analyzed schematic diagrams to effectively design PCB layouts.
                            7. Interfaced with board fabrication vendors to select and use correct impedance rules, Design for Manufacturing (DFM), Design for Assembly (DFA) and Design for Testability(DFT) rulesets.
                              Years of Experience
                              Experience
                              5-7 Years
                              Experience Level
                              Level
                              Junior
                              Education
                              Education
                              Master's In Applied Physics

                              PCB Design Engineer Resume

                              Objective : PCB Design Engineer with significant experience working with precision scientific instrumentation in a regulated environment. Over ten years' hands-on experience specifically designing ADC systems and performing precision analog design work. Design specialties include low noise analog signal processing circuits, high-speed analog closed-loop control systems, and A to D, D to A conversions.

                              Skills : PCB Design, Spice Simulation, Spice Simulation.

                              Description :

                                1. Captured design schematics with Orcad Capture 16.6.
                                2. Created custom schematic symbols and populate attribute fields with component values.
                                3. Prepared BOM files for purchasing parts from vendors (Mouser/Dig key}.
                                4. Specify parts numbers based on component values.
                                5. Designed proto-type PCBs for proof of concept using Orcad PCB Editor 16.6.
                                6. Created custom PADs, Vias, Flashes and Footprint to be used on board layout.
                                7. Defined PCB rules using the Constraints Manger at the Net level Create Gerber file for manufacturing and view them with CAM350 Send Gerber and Fab files board house and support as needed.
                              Years of Experience
                              Experience
                              2-5 Years
                              Experience Level
                              Level
                              Executive
                              Education
                              Education
                              GED

                              PCB Design Engineer Resume

                              Summary : Over 14+ years of experience as, Printed Circuit Board Designer, Electrical Design Engineer, and Testing Engineer with an outstanding quality record of engineering products from design to manufacturing. Adapted to working on tight deadlines while demonstrating problem-solving skills and effective management of daily tasks.

                              Skills : PCB Design / Layout, Mentor Graphics PADS, Mentor Graphics LOGIC, ORCAD.

                              Description :

                                1. Developed Printed Circuit Designs including assembly and drill drawings, bills of material, engineering changes orders and incorporations, and schematic layouts for Medical Instrumentation.
                                2. Designed and developed application software for cad support.
                                3. Maintained cad database libraries and archival systems.
                                4. Interfaced with outside vendors for the manufacture and assembly of all printed circuit boards.
                                5. Adopted design practices using the most up-to-date design, manufacture, and assembly techniques.
                                6. Reported all scheduling and progress information to the Vice-President of plant operations.
                                7. Worked on multiple Qualcomm and Broadcom testing boards including Avatar 12X, Aragorn 12X, Eliza 2X,Akronite 6X,Baheera 4X,Olarin 2X Worked on Interposer Boards.
                              Years of Experience
                              Experience
                              10+ Years
                              Experience Level
                              Level
                              Senior
                              Education
                              Education
                              BS

                              PCB Design Engineer Resume

                              Headline : Considerable experience in electronics, which ranges from working hands-on as an electronics technician through electrical engineering. Also have a strong mechanical aptitude and have worked in a machine shop environment and well as a mechanical engineer. I like to peruse a career, which utilizes both my electronics and mechanical abilities.

                              Skills : PCB Design, Visual C/C++/Basic Programming.

                              Description :

                                1. Designed multi-layered HAST/THB and HTOL BOARD.
                                2. Designed Burn-in boards, DUT Cards, Program Cards, Daughter Cards.
                                3. Designed controlled impedance boards.
                                4. Worked with Hardware Engineers, PCB Designers, Mechanical Designers, and Fabricators for the development and sustaining of actual products.
                                5. Experienced with high-speed digital design, Analog design layout techniques.
                                6. Experienced with RF design layout techniques (plus).
                                7. Experienced with Switch Mode Power Supply layout techniques.
                                        Years of Experience
                                        Experience
                                        5-7 Years
                                        Experience Level
                                        Level
                                        Executive
                                        Education
                                        Education
                                        Associate Of Science

                                        PCB Design Engineer Resume

                                        Headline : Responsible for managing all aspects of PCB design, work with hardware design engineers and PCB/Assembly vendors to determine PCB stack-up, apply design constraints, perform component placement, signal routing, and DFM.

                                        Skills : MS Office, Designing Skills.

                                        Description :

                                          1. Experienced with Impedance Control and Transmission Line Theory.
                                          2. Experienced with Downstream BluePrint and CAM350 (plus).
                                          3. Worked closely with product design engineers, you'll perform PCB layout of high speed/high-density value-conscious PCBs for all business units at NVIDIA (GPU Desktop, Notebook, Automotive, Professional, Data Center, Deep Learning, and AI).
                                          4. Focused will be on the complete development of CAD layout from symbol creation, floor planning, and detailed component placement, constraints management, with a concept of topology and signal/trace integrity.
                                          5. Designed releases required generation of artwork files, ODB++, test reports, and electronic PCB documentation.
                                          6. Designed will need to follow SI constraints, EMI/RFI control and FCC, UL and European regulations, IPC specifications and NRC regulations.
                                          7. Experienced in high-speed design.
                                                Years of Experience
                                                Experience
                                                5-7 Years
                                                Experience Level
                                                Level
                                                Executive
                                                Education
                                                Education
                                                B. E In Communication

                                                PCB Design Engineer Resume

                                                Headline : Responsible for Auditing and assessing PCB vendor production lines, including manufacturing techniques & quality control systems, and also Reviewing new technology qualification & new product introduction first article data and make disposition decisions.

                                                Skills : PCB Designer, MS Office.

                                                Description :

                                                  1. Worked on numerous telecom projects for a number of companies including Nortel, IBM, Lucent, and Sun Microsystems.
                                                  2. Routed and designed for manufacture for complex designs with varying corporate requirements and challenging time constraints in collaborative, multi-site development environments.
                                                  3. Created 3D models of circuit board assemblies in Solidworks.
                                                  4. Prepared drawings/method sheets for use in production.
                                                  5. In charged of interfacing between engineering, production, testing, and troubleshooting to ensure on-time manufacturing of products.
                                                  6. Specified and approved parts for prototype and production.
                                                  7. Led mechanical PCB outline and layer setup (component placement and signal routing).
                                                      Years of Experience
                                                      Experience
                                                      5-7 Years
                                                      Experience Level
                                                      Level
                                                      Executive
                                                      Education
                                                      Education
                                                      MS