Structural Design Engineer Resume Samples

Structural Design Engineers are involved in designing, planning, and overseeing the construction process of new buildings or structures, alterations, and modifications of an existing structure. Key tasks included in the Structural Design Engineer Resume are – preparing reports and drawings, calculating the amount of load and stresses, providing technical advice, selecting appropriate construction materials, obtaining building regulation approvals, managing project from scratch till finish, administering contracts, inspecting properties to check foundation and conditions and figuring out risk involved like collapses or repairs or defectives.

As a Structural Design Engineer, you will need these skills – strong analytical and logical thinking capacities, three-dimensional conceptual skills, diagrammatic skills, and a strong grasp of physics, great interest in design and structure of buildings, strong knowledge of CAD, keen commercial awareness, and staying abreast of the industry’s latest technologies. Routes to this career are open to both graduates and school leavers. However, possessing extra qualifications will boost the application.

Structural Design Engineer Resume example

Structural Design Engineer Resume

Summary : Obtain an engineering position allowing to use and apply many years of experience and wide variety of design engineering and project engineering/project management knowledge.

Skills : Auto CAD, Bentley RAM, SAP 2000.

Description :

    1. Structures included overhead structures spanning roadway with supports at each end, cantilever structures, balanced butterfly structures.
    2. Designed building trusses for a building modification project at Meharry Medical College in Nashville, TN.
    3. Performed 3-D modeling and structural analysis and design of bridge-mounted sign support structures.
    4. Designed foundations for sign support structures including spread footings and drilled piers.
    5. Provided various estimates for sign structure proposals (structural steel design, reinforced concrete design, fabrication costs, and shipping costs).
    6. Structural design was performed based on requirements of various AASHTO Sign Structure and Luminaire Specifications and ACI 318.
    7. Design and analysis of steel beams, girders, columns, base plate, and reinforced concrete slabs, walls, foundations, culverts.
Years of Experience
Experience
7-10 Years
Experience Level
Level
Management
Education
Education
Civil Engineering


Structural Design Engineer II Resume

Headline : Hard-working individual with effective communication skills and previous experience in structural and bridge engineering. Searching to obtain a challenging career path that will enhance his previous knowledge.

Skills : Pro-e, CATIA, Auto-CAD , I-Towers.

Description :

    1. Perform thermal and structural analysis of nuclear steam generators and their associated internals.
    2. Analysis experience consists of linear elastic and elastic-plastic limit load shock analysis using ABAQUS finite element modeling.
    3. Thermo Mechanical experience consists of developing heat transfer coefficients and performing thermal and associated structural finite element modeling.
    4. Results are then post-processed to check for code compliance.
    5. Structural code requirements for fatigue, stress ratcheting, and fracture mechanics are that of ASME Pressure Vessel and Piping Code.
    6. Work with members of other engineering disciplines in a team setting to generate and optimize designs.
    7. Support the onsite and offsite shops with fabrication related issues. Maintain a DOE L Security Clearance.
Years of Experience
Experience
5-7 Years
Experience Level
Level
Executive
Education
Education
Masters


Structural Design Engineer/Executive Resume

Headline : Senior level mechanical engineer with over seventeen years of experience seeks new and challenging opportunities to further engineering profession.

Skills : Mechanical Engineering, CATIA V5, CATIA V6, SolidWorks,.

Description :

    1. Constructed Liquid Cooling System (LCS) on the CAEW program for Gulfstream Aircraft.
    2. Modeled tube routing throughout aircraft; prepared drawings both detail and installation using CATIA V5.
    3. Researched Fittings, Quick Disconnects, Swivels, and Tube Assemblies for LCS installation.
    4. Responsible for the design of mechanical systems for installations according to aviation requirements and industry and company standards.
    5. Devised and developed drawings, conducted design reviews to meet quality, cost and delivery goals.
    6. Mounted manifolds, brackets, shear clips, longerons, out of sheet metal along with routing tubes throughout aircraft and modified metal extrusions.
    7. Investigated, designed and assembly of the Mission Power Distribution Box (MPDB) that provided electrical power.
Years of Experience
Experience
5-7 Years
Experience Level
Level
Executive
Education
Education
BS

Structural Design Engineer/Management Resume

Summary : Structural design engineer with experience on NASA's Space Launch System program. Expert user of PTC Creo CAD software with a proven track record of on schedule drawing release.

Skills : Microsoft Office Suite, Drafting, PTC Creo Parametric.

Description :

    1. Reduced the number of parts in three separate assemblies by 50% or more and eliminated the need for seven unique drawings.
    2. Successful completion of eight layout design reviews encompassing three unique systems of components within the rocket.
    3. Created and submitted all requested materials for NASA's preliminary and critical design reviews months ahead of schedule.
    4. Designs were approved without requiring revision.
    5. Collaborate with customers to define requirements and validation procedures.
    6. Creo Parametric to create detailed 3D CAD models and 2D engineering drawings.
    7. Integrate skill sets of a multi-disciplined team of engineers to mature concept designs and ensure product quality in relation to strength/
Years of Experience
Experience
7-10 Years
Experience Level
Level
Management
Education
Education
Engineering

Structural Design Engineer/Representative Resume

Summary : Multi-Faceted self-starter experienced in Structural Designing, looking for an Entry-level position where want to use experience to carry out tasks with efficiency, professionalism and cost effectiveness.

Skills : SAP 2000, MS-Office.

Description :

    1. Superior Derrick Services LLC provides design, fabrication, and delivery of drilling rigs.
    2. Carried out analysis and design to fabricate oil field drilling masts and substructure for onshore and offshore environments.
    3. Collaborated with an engineer to prepare and deliver project designs (both calculations and drawings) as per prescribed specifications and timelines.
    4. Liaised with and conveyed status to clients to respond to questions and additional requests before and after the delivery of the final product.
    5. Led a team of three drafters to prepare project design CAD model and fabrication drawings.
    6. Performed extensive research and applied advanced analysis/design methodologies to drilling structures.
Years of Experience
Experience
7-10 Years
Experience Level
Level
Management
Education
Education
Ph.D

Structural Design Engineer/Co-ordinator Resume

Summary : Mechanical Engineer with fourteen years experience developing plans, processes and systems resulting in new product offerings and increased system efficiency. Capable of quickly learning and applying new technology.

Skills : Auto cad, Catia, Microsoft Office, Math cad.

Description :

    1. Efficiently manipulated engineering bill of material/parts list updates and drawing changes using PDM (Product Data Manager).
    2. Assisted in the development of the product life cycle.
    3. Developed initial design and create 3D layouts of all frames, outboard floors and pressure closeouts in the cockpit area.
    4. Successfully designed and released multiple skin installation/assembly drawings for the forward fuselage.
    5. Created and released several final finish drawings for external covers.
    6. Restructured the bill of materials in PDM when required. Steel design for commercial structures.
    7. Reinforced Concrete design for commercial structures Provide structural details to project management, steel detailers and field personnel.
Years of Experience
Experience
7-10 Years
Experience Level
Level
Management
Education
Education
BS

Structural Design Engineer III Resume

Summary : Mechanical design engineering experience working with suppliers and OEMs, including Spirit Aero Systems, Gulf Stream, Honda Jet, and Airbus, on commercial and military projects.

Skills : Staad Pro, MBS, Auto Cad, Limcon.

Description :

    1. Provided preliminary analysis, design, and layout of aircraft floor structures with conventional view projection, geometric dimensioning and tolerance.
    2. Developed detail, assembly and installation drawings.
    3. Evaluated design solutions considering functionality requirements, weight, cost, and schedule.
    4. Defined tasks and milestones to meet requirements of quality, time, and cost.
    5. Prepared technical work statements for new customer introductions, and existing plane retrofits.
    6. Complied with the company, national, and industry drawing and design standards, product configuration and control.
    7. Coordinated with manufacturing planning assembly of aircraft new designs and revisions.
Years of Experience
Experience
10+ Years
Experience Level
Level
Senior
Education
Education
Technology

Lead Structural Design Engineer Resume

Headline : Forefront of structural analysis & design by adding to professional experience with continuously updated knowledge of industry trends. The long term goal is to gain experience in different design environments.

Skills : SAP2000, LUSAS, MIDAS, PCAColumn, STAAD Pro.

Description :

    1. Design and verification of I-66 Express lanes that consists of steel composite bridges and pre-tensioned concrete bridges.
    2. Checking of plans and calculations and performed structural analysis of superstructures using MDX and Conspan.
    3. Perform time-dependent staged construction analysis of multi-span continuous bridges with MIDAS and develop structural drawings.
    4. Checking detailed shop drawings for a 270-foot dual, 2-span, steel box girder movable bridge.
    5. Elements checked included the steel box girders, diaphragms and bracing portions of the bridge.
    6. The design of piers and end bents of a four-span steel girder bridge.
    7. LRFD design and RC-Pier to design substructure according to the Florida Department of Transportation guidelines.
Years of Experience
Experience
5-7 Years
Experience Level
Level
Executive
Education
Education
Engineering

Associate Structural Design Engineer Resume

Headline : Seeking a position in the engineering field that benefits from educational background and extensive application of CATIA 4 and CATIA 5, VPM and PDM and LCA ENOVIA with advanced aircraft structural design and production support.

Skills : SAP2000, Tekla.

Description :

    1. Design of composite and metallic parts with 3D solid surface models using CATIA V5 and fibers.
    2. Design structural parts for the 787 Dreamliner Leading Edge per Boeing standards and processes.
    3. Create 3-Dimensional models and apply Geometric Dimensioning and Tolerancing.
    4. Design and develop composite structures including upper and lower panels for the fixed leading edge.
    5. Develop and maintain mechanical/structural engineering product definition. Revise 3D models updating details, sub-assembly.
    6. Coordinate with Stress Engineering, Materials & Process Engineering, and Manufacturing to design deliverables.
    7. Created design release process documentation for the 787 Leading Edge team.
Years of Experience
Experience
5-7 Years
Experience Level
Level
Executive
Education
Education
Mechanical

Sr. Structural Design Engineer Resume

Summary : An aggressive and challenging Electro-Mechanical Systems and Structural Engineering career within the aerospace industry, utilizing varied technical and creative abilities and skills within a competitive atmosphere.

Skills : Auto cad, Auto desk Inventor, Solid works, Algor.

Description :

    1. Worked on scoping, raising, lifting, load out and transportation analysis for onshore and offshore structures.
    2. Performed Finite Element Analysis and Fatigue checks on critical connections. Structural Analysis of pin connections, weld connections using AISC.
    3. Reviewing shop drawings using either Auto-CAD, Tekla structure, and Inventor.
    4. Project scheduling, customer co-ordination, input to drafting team, 3D model and shop drawings checking.
    5. Co-ordination with a fabrication shop, installation team, and customer to ensure a speedy and accurate fabrication and job commissioning.
    6. Preparing design reports, installation reports, operation, and maintenance manual using API 4F, AISC, API RP 2A.
    7. Generate and coordinate designs for new and modified interior products. Created layouts and drawing mods for composite cabinets and galleys.
Years of Experience
Experience
10+ Years
Experience Level
Level
Senior
Education
Education
Masters

Asst. Structural Design Engineer Resume

Headline : Worked with US, Southcafrican & Indian Design codes. Executed varied design projects. High level of persistence at problem solving. Ability to work under intensive deadlines.

Skills : Aerospace Structural Design, Mechanical Design.

Description :

    1. Designed mechanical mechanisms and rigging procedures.
    2. Designed and released monolithic machinings, optimized for manufacturability to reduce cost and lead time.
    3. Designed/Released Carbon Composite detail parts manufactured using hand layup manufacturing practices.
    4. Engineering Liaison for program composite part supplier and advanced metals fabrication supplier: Coordinated engineering technical data.
    5. Held weekly status meetings, coordinated part need dates and production requirements.
    6. Worked directly with the supplier to mitigate technical problems. Coordinated with procurement on material orders.
    7. Responsible for designing the structures based on all the latest codes and software in the gulf market with new challenges.
Years of Experience
Experience
5-7 Years
Experience Level
Level
Executive
Education
Education
Engineering

Structural Design Engineer Resume

Summary : Master in Civil Structural Engineer with over two years of experience in various design projects involving steel, concrete, and foundation design to various country codes.

Skills : Auto cad, MS Office, Material Analysis, Quotes.

Description :

    1. Designed structural systems involving steel, concrete, and wood.
    2. Reviewed shop drawings for compliance to contract drawings. Assisted with coordinating team members on large projects.
    3. Performed construction administration on various projects, including out of state travel.
    4. Conducted exploratory investigations of existing structures.
    5. Designed structural frames and generated calculations for mechanical structures, including dust collectors and pressure vessels.
    6. Designed the paint booth additions for Cessna. Skills Used RISA, Enercalc, CAD, Construction Management.
    7. Responsible for corresponding consultant meetings, customer meetings, discussions in the office.
Years of Experience
Experience
7-10 Years
Experience Level
Level
Management
Education
Education
BS