Structural Designer Resume Samples

Description :

1. Reviewing the soil investigation reports submitted by the geotechnical engineer and choosing the appropriate foundation according to the allowable bearing capacity, soil shear strength, water table, subgrade reaction modulus and analyzed soil layers.
2. Performing hand (mathematical) calculations for miscellaneous concrete and steel members to come up with basic sizes in order to be checked adequately using structural analysis software, STAAD Pro or others.
3. Performing design load assumptions in accordance with the ASCE 7-10.
4. Creating 3D models for miscellaneous structures; concrete buildings, steel-framed buildings, security towers, maintenance shops, sunshades, warehouses, storages, culverts and communication towers.
5. Arranging the out-put files for the structural calculation, and summarized all load assumptions and combination, soil investigation report and discussion regarding foundation type choice ,discussions regarding member sizes, rebar details (diameters and spacing), steel connection details, welds, bolts and base plates, and discussions regarding discrepancies between contract requirements and referenced standards/codes (ACI, ASCE, AISCE or others).
6. Creating design drawings for the structures that I have designed, and compare and double-check between structural design and analysis using engineering software and the drafted drawings.
7. Creating shop construction drawings that shows how the structures are to be erected taking into consideration safety requirements, time frame, available equipment & tools, and material availability.
8. Creating detailed rebar drawings and formwork erection drawings for miscellaneous concrete members (foundations, beams, slabs, columns, and others).

Experience

2-5 Years

Level

Junior

Education

ME

Description :

1. Design & layout of columns & structural steel, establishing bay layouts, top of steel elevations and detailing for schools, hospitals, arenas, parking garages and judicial facilities such as courthouses, prisons, and various commercial structures.
2. Layout and sizing of concrete footing, slabs and foundation walls, also sizing and placement of reinforcing.
3. Design and coordination of precast facilities such as parking garages and prisons along with architectural precast wall systems.
4. Extensive work with a precast plank floor and roof systems supported by CMU load-bearing walls and of steel-framed systems often utilized in our educational facilities.
5. Interdisciplinary coordination for structural, electrical, piping, HVAC and food service systems Long with the design responsibilities, also includes creating Workplan budgets for projects from Schematic Design to Construction Administration.
6. Responding to RFI's and reviewing all Structural Shop Drawings and submittals for each project.
7. Assist in the talk of CAD System maintenance, company standards, menus, libraries, and document control.

Experience

7-10 Years

Level

Management

Education

Engineering

Description :

1. Designed components or portions of systems and modify existing designs to develop or improve products and to facilitate manufacturing operations.
2. Utilize cad and ship constructor along with other programs to make designs and to gather information needed to make studies, prepare rough layouts, and installation drawings to present to the design proposal.
3. Worked in 3d/2d structural design, have lofted bills for the mold loft department.
4. Layout, fabricate and assemble a variety of standard and nonstandard major jigs, fixtures, tool masters, master tooling gauges, and related tooling involving compound angels and complex contours where the establishment and coordination to exacting tolerances of numerous tooling holes and reference points between several planes are required.
5. Utilize 3d software (Spatial Analyzer) to cut stock off of units prior to assembly.
6. Plan work to be performed and determine methods and sequence of operations working from tool design drawings or own designs.
7. Set up and operate optical instruments (total stations/auto-levels/theodolites) to check overall and detailed alignment, fit, or adjustment of assemblies.
8. Use of commercial structural design and analysis software programs such as tabs, strudel, and ezfeat.

Experience

10+ Years

Level

Management

Education

MS

Description :

1. Accurately and effectively generate 3D models, design drawings, fabrication drawings, field modification drawings and general arrangement drawings of complex bulk material handling machinery.
2. Coordinate with engineers, project managers, and other designers to ensure correct fitment, clearances, and scheduling of designs.
3. Produced highly detailed 3D models with Autodesk Inventor for use in both basic and complex FEA and simulation analysis.
4. Generated detailed 3D models of complex designs for FEA analysis, simulation analysis, as well as an informational and visual reference to head engineers with the use of AutoCAD and Autodesk Inventor.
5. Responsible for overseeing the design coordination of complex tandem train dumpers and stacker/reclaimers, under aggressive scheduling.
6. Accountable for collaborating what I had learned and held a class to teach and distribute the information to employees.
7. Trained employees in the creation of accurate 3D models implementing the use of "top-down" skeletal modeling techniques with Autodesk Inventor 2010.
8. Assisted in generating structural designs and analysis for buildings under the supervisory of a licensed structural engineer.

Experience

7-10 Years

Level

Executive

Education

Associate

Description :

1. Pipe rack retro-fit of 386 tons steel and 361 cubic yards concrete for the refinery.
2. Superband steel bents, bracing, pipe supports and multi-tier frames 60 feet in height.
3. Exploratory work done, for existing operating plant condition, prior to construction, modeling and drawings developed.
4. Utilized Project Road to provide road horizontal and vertical alignment models for Heavy Haul road development to facilitate traffic logistics for delivery of equipment for installation.
5. Utilized the ProjectWise project file manager to import (check-out) and export (check-in) active project models and 2D deliverable files for real-time intelligence within the Civil Department as well as the collective project team and project management.
6. PDS Frameworks models completed and extractions are done to construct IFC drawing deliverables for client approval.
7. LFM laser scan insertion to Frameworks models to ensure optimal real-time field conditions to the accurate construction effort.
8. Created construction documents/ structural plans and details using Revit and AutoCAD.

Experience

0-2 Years

Level

Entry Level

Education

Civil Engineering

Description :

1. Worked on Pemex projects doing rigging for suction piles, mattresses, jumpers, pull heads, and frames.
2. Worked closely with engineers to create sea fastening drawings for spools, risers, and suction piles while keeping in mind cost and space.
3. Create rigging blocks for our department that helped cut our cost and time spent on drawings.
4. Making the fabrication, installation, and rigging drawings for all of the structures.
5. Helped with the conceptual design that was used for quoting and proposal purposes.
6. Other types of drawings that worked in consist of piping, mud mats, along with customer and shop drawings.
7. Worked to make 3D prints of a hang off flange that modeled and made the fabrication drawing for.
8. Assisted in generating structural designs and analysis for buildings under the supervisory of a licensed structural engineer.

Experience

10+ Years

Level

Senior

Education

Certification

Description :

1. Lead technician and integral member providing design for Methods, Structural, and Geological team.
2. Develop Construction processes and Engineering practices to facilitate the procedures and operations in each area.
3. Design drafting for Methods of construction for roadway realignment, bridge widening, and tunnel construction of the corridor.
4. Oversee CAD asbuilts and existing topography (asbuilt).
5. Guide and assist field engineers with problem-solving, escalated design concerns, infrastructure conflicts, and field changes.
6. Assure consistency with asbuilt field conditions and apply methods of design for the "build" process.
7. Review engineered plans and assess methods of the construction process for site installations, structural detailing, and soil improvement specifics for stabilization requirements for tunnel corridor.

Experience

5-7 Years

Level

Executive

Education

Associates

Description :

1. Responsible for producing accurate 3D SolidWorks models and detail drawings for manufactured parts.
2. Development of installation drawings & work instructions necessary to install in-flight wireless internet systems.
3. Design and modification of aircraft structure to support large radome antenna and in-cabin wireless internet system components.
4. Preparation of FAA certification drawings.
5. Developed accurate SolidWorks models of the aircraft structure, & structural assemblies in accordance with OEM Technical Data Package.
6. Design & develop structural modifications necessary to support large radome antenna.
7. Development of detailed drawings of manufactured components and installation drawings as needed for installation and certification of customer aircraft.
8. Technical Data Package (TDP) development IAW Mil.

Experience

0-2 Years

Level

Entry Level

Education

AA

Description :

1. Served as an Autocad drafter for various roadway and wastewater projects as well as the structural detailer for both new and rehabilitated bridges.
2. Translated preliminary sketches and drafts into finalized construction drawings.
3. Experience with a wide variety of bridges, such as steel beam, box culvert, suspension, etc.
4. Involved in the bridge review process, ensuring quantity calculations meet compliance.
5. Provided AutoCAD and Microstation support for new staff.
6. Served as an inspector for several departments of transportation projects.
7. In charge of projects from the preliminary design phase throughout the completion of construction documents.
8. Performed structural analysis and design of various residential structures framed entirely with cold-formed structural steel beams, frames, trusses, floor joists, and stud members.

Experience

10+ Years

Level

Senior

Education

Diploma++

Description :

1. Provide Sales staff with information regarding the status of specific projects.
2. Provide technical customer support through written and verbal communication as required.
3. Investigate and promote possible cost reductions through design improvements or more efficient processing techniques.
4. Interact with Production departments to resolve/clarify any issues regarding drawings presently in production.
5. Access Vantage to determine part numbers and material stock quantities as required.
6. Prepare Estimates and Job Order amendments as required.
7. Prepare and submit a neon pattern requisitions to complete the electrical drawings.

Experience

2-5 Years

Level

Junior

Education

Diploma

Description :

1. Provided layouts, general arrangements and structural drawings such as deck extensions, pontoons, columns, and bulkhead modifications.
2. Consult with other departments to avoid interferences.
3. Checked shipyard approval structural drawings and met regularly with shipyard engineering.
4. Developed and checked AutoCAD detailed structural drawings for the organization.
5. Prepared and finalize all general arrangements.
6. Verify equipment location or relocation to better suit the final design.
7. Assist in systems development as required, such as drafting standards, and parts list systems.

Experience

7-10 Years

Level

Executive

Education

Certification