Tool Room Supervisor Resume Samples

A Tool Room Supervisor is hired to take care of the busy Tool Rooms. The job description entails checking tools movement, cleaning and inspecting tools; and monitoring the daily operations of the workers in the tool room. Duties and functions seen on the Tool Room Supervisor Resume are – filling tools and consumable requisitions; checking tools in and out to jobs; cleaning and inspecting tools; tagging tools that need repair; taking responsibility for returning tools; replacing barcodes if needed; loading tools into trucks or trailers, and taking responsibility for inventory controls. Managing tools level, supervising tool room assistants; and writing purchase orders also form part of the job description.

Working at this capacity needs the following skills – high level of attention to details; observation skills; proficiency with relevant software; knowledge of maintaining safety protocols; above-average supervisory skills; and experience in maintaining and operating basic tools and equipment. A high school diploma or GED is mandatory for this role.

 

Tool Room Supervisor Resume example

Tool Room Supervisor Resume

Headline : Customer-Focused, performance-driven Tool Room supervisor. Looking to get back into the Aviation Previous work at Honeywell Repair and Overhaul Work Flow (Supervisor) . Primary responsibilities include supporting contract accounts for Boeing Operators on the MD, 737, 717 Platforms. Main focus was to drive positive customer satisfaction through maintaining quality repairs and improved product reliability for longevity of Avionic products.

Skills : Knowledge Of Tools And Equipment, Parts And Supply Ordering, Tool Maintenance And Repair Procedures.

Description :

    1. Provided mentoring and leadership for 14 direct reports.
    2. Conducted pass down meeting in the morning and afternoon with direct reports.
    3. Helped develop PM on Tool/Die equipment.
    4. Participated in daily production meeting and advise on any tooling issues Site safety coordinator Safety.
    5. Trained Supervisor Certification in process.
    6. Ensured all tooling is available for Hammers, to meet daily production requirements provided by Stanley Black & Decker.
    7. Performed as required, conduct an RCA to develop action plans to prevent future premature failures.
    8. Conducted a tooling review meeting to check dies and tooling going and coming back from the hammers.
Years of Experience
Experience
5-7 Years
Experience Level
Level
Executive
Education
Education
Associate Degree In Avionics And Aircraft Instrumentation.


Sr. Tool Room Supervisor Resume

Objective : Motivated self-starter with a can do attitude. Possess the ability to build and work as an integral part of a team to complete tasks with first time quality. Experienced in scheduled/unscheduled maintenance, upkeep, and inspection cycles of Commercial and Military aircraft. Experienced in in-bound and out-bound inspections Training Within Industry (TWI) - Qualiled TWI trainer.

Skills : Inventory Control, Computer Literate, Shipping, Warehouse, Fork Truck Experience.

Description :

    1. Ensures tools are maintained and production-ready to support daily production requirements.
    2. Ensures that tooling technicians are fully trained in safe operating practices and procedures.
    3. Ensures all forms and tags specified in our procedures and work instructions are always utilized and properly completed by the tooling team members.
    4. Ensures these procedures and work instructions are maintained and current.
    5. Schedules tool room work to optimize resource utilization and tool room equipment performance while ensuring tools are ready for production.
    6. Develops and maintains a tooling preventative maintenance program to ensure optimal tooling performance and availability for production.
    7. Defines and manages the tool room budget to optimize performance and minimize cost.
Years of Experience
Experience
0-2 Years
Experience Level
Level
Entry Level
Education
Education
Technical Management


Jr. Tool Room Supervisor Resume

Headline : To work for an entity that able to use great communication and organizational skills to enhance the efficiently of daily operations. Shaw / CB&. presently employed Supervisor Responsible for the daily operations of the welding department concerning welding consumables and gas cylinders.

Skills : Peoples person, Tools power.

Description :

    1. Controlled inventory of all home office and field purchased materials, interfacing with field engineers and craft superintendents.
    2. Maintained detailed records of over 1,200 tools valued at more than $95,000 Performed monthly inventories.
    3. Manufactured metal automotive components for Cold and Hot Stamping.
    4. Responsible for Safety Meetings, Continuous Improvement, 5S, Training, Order perishable items as needed, APQP, Scheduling, Lean Manufacturing, QDC Programs.
    5. Taught and Apprenticed School Documents and Evaluations on work performed.
    6. In charged of daily operation of company tool room and employees.
    7. Worked very closely with outside vendors for cost improvement.
Years of Experience
Experience
5-7 Years
Experience Level
Level
Executive
Education
Education
Journeyman In Card

Asst. Tool Room Supervisor Resume

Summary : To seek employment with a company where can use skills and abilities to help the company meet their goals and where can advance within the company. Supervise in kitchen Train new cooks. Keep records of product sizes and parts completed. Assisted in ordering meat and produce Set P.

Skills : Microsoft Office, Supervisor.

Description :

    1. Maintained over 5 Million dollars of equipment.
    2. Implemented procedures on controlling these assets.
    3. Maintained all calibrated equipment.
    4. Developed a monthly budget through trend analysis of inventory build up.
    5. Coordinated and distributed calibration .
    6. Conceptualized and founded a Tool Room.
    7. Coordinated design and manufacture of all tooling.
Years of Experience
Experience
7-10 Years
Experience Level
Level
Management
Education
Education
Diploma

Associate Tool Room Supervisor Resume

Summary : Technically and Highly skilled Journeyman Tool & Die Maker/Tool-room Supervisor with hands-on experience and technical training, with extensive manufacturing experience. Safety focused and familiarity with LEAN manufacturing principles. Skilled with solid work history and proven ability to perform well as a supervisor, a team player and individually.

Skills : Microsoft Office, Production Management, Engineering.

Description :

    1. Established and maintained inventory of tooling materials.
    2. Supervised group of hourlyrated skilled employees who fabricated, repaired and modified tools and dies.
    3. Directed oversight of a staff of journeyman tool makers and tool grinders.
    4. Responsible for implementation and continuous improvement of the FederalMogul Production System (FMPS) within the toolroom team and the Burlington, IA facility in compliance with the principles of Lean Manufacturing.
    5. Provided leadership and management of the tooling team to ensure a positive and professional work environment.
    6. Worked with operations supervisors on maintaining and repairing all production machines.
    7. Worked together with Production and Quality and their respective teams to drive continuous improvement in product and process.
Years of Experience
Experience
10+ Years
Experience Level
Level
Senior
Education
Education
Diploma

Tool Room Supervisor III Resume

Summary : Seeking a well established company with a reputation for manufacturing quality work, offering challenging projects with the potential to enhance knowledge working for career advancement.

Skills : Tools technician, Supervisor.

Description :

    1. Responsible for directing 6 full time Tool & Die Makers in pressroom troubleshooting and preventive maintenance of progressive and single hit tooling.
    2. Responsible for tooling readiness to support production requirements and continuous improvement of part quality and Die efficiency.
    3. Responsible for maintaining and ordering tooling and tool room perishables.
    4. Scheduled hours for Die repair and maintain Die history documentation for all tooling.
    5. Worked with quality control in design and making of manual and CMM part checking fixtures.
    6. Provided critical evaluation of proposed stamped parts and tooling for new project launches.
    7. Responsible for strip lay-out and Die design review and approval of new tooling.
Years of Experience
Experience
10+ Years
Experience Level
Level
Senior
Education
Education
Industrial Auto

Tool Room Supervisor II Resume

Objective : Ten years experience Microsoft Processing (Access, Excel, Power Point, and Word). Meticulous attention to detail. Excellent time management; meets deadlines on time with maximum results. Strong problem solver; thinks outside the box. Self-learner with little to no supervision required. Efficient communication skills. Very resourceful.

Skills : Military, Team Building, Leadership Development, Inventory Management, Data Entry.

Description :

    1. Worked with the Cad Room on fixture design making suggestions for ease of machining and mounting when needed, offered knowledgeable support.
    2. Built tube end form tooling along with tooling for bending tubes used for automotive and military mobile equipment, using manual Bridgeport style milling machine along with manual lathes and surface grinder.
    3. Greeted and assist machine and tooling sales representatives.
    4. Selected to revamp and manage the struggling tool control program.
    5. Personally singled out by inspectors for flawless performance.
    6. Meticulously conducted a wall-to-wall inventory of over 500 support equipment items worth over $21 million.
    7. Oversaw the calibration of the company's tools and support equipment, met all calibration due dates and replaced items that did not meet calibration requirements.
Years of Experience
Experience
2-5 Years
Experience Level
Level
Junior
Education
Education
Bachelor Of Science In Technical Management

Tool Room Supervisor I Resume

Objective : Toolmaker 22 years in plastics industry. Program Manager 7 years experience Plastics industry. Manufacturing Manager 3 Years Experience. Tractor Trailer driver 6 Years Experience. Material Mover / Jitney Driver 4.5 Years experience.

Skills : Microsoft Office, Technician.

Description :

    1. Responsible for all activities of a two shift Toolroom, manufacturing tooling to support research, development and new product introduction of various high performance cabling interconnects, for our worldwide production facilities.
    2. Planned and scheduled all work processed through toolroom.
    3. Coordinated $1,000,000/year of outside supplier/vendor work.
    4. Hired and developed subordinates.
    5. Cooperated with all engineering departments to complete projects within customer timelines.
    6. Established new protocols that lessen lead time to market on prototype components.
    7. Practiced lean concepts within tool room to increase throughput.
Years of Experience
Experience
2-5 Years
Experience Level
Level
Junior
Education
Education
Associates Degree In Business Administration

Lead Tool Room Supervisor Resume

Summary : To provide technical and professional assistance and support to the manufacturing firm for which employed. One way this objective can be accomplished is by being customer led, and to continue staying on the cutting edge of technology through continuing education and setting reasonable goals and thoroughly understanding the scope and direction that Manufacturing Engineering is taking. personal goal or objective is to continue to use hands on skills and education to better any organization that may request services.

Skills : Tooling Engineer, Tool And Die Mold Maker, Mastercam Autocad, Maintenece.

Description :

    1. Oversaw the calibration of the company's tools and support equipment, met all calibration due dates and replaced items that did not meet calibration requirements.
    2. Resolved computer program operational problems.
    3. Prepared invoices, reports, memos, and letters to customers using Microsoft Office.
    4. Answered calls and questions from employees and customers.
    5. Created spreadsheets via Microsoft Excel to ensure a 100 percent accurate tool inventory.
    6. Reviewed paperwork such as invoices, orders, and safety documents.
    7. Oversaw tool and equipment purchases, receiving, maintenance, repair, and replacement.
Years of Experience
Experience
10+ Years
Experience Level
Level
Senior
Education
Education
Associates Of Applied Science In Manufacturing Engineering Technology

Tool Room Supervisor Resume

Summary : Extensive background in virtually all aspects of industrial manufacturing operations, with hands-on production, supervisory and leadership responsibilities in customer-driven, team environments. Skilled in troubleshooting and problem resolution new product design; training and supervising machine operators in quality control, adherence to work order specifications, and equipment maintenance.

Skills : Fluent In Spanish, Supervisor.

Description :

    1. Conducted daily, weekly, monthly, quarterly, and annual inventories on tool kits, sets, and chests to keep 100% accountability, and identified broken .
    2. Managed machine tooling and personnel; inspect custom ground tooling, tool room coordination with machine shop.
    3. Ordered machine tools, tool-room and machine shop supplies.
    4. Worked directly with maintenance manager, engineering and manufacturing supervisor to produce gages, machine tools and all re-sharpening .
    5. Responsible for maintaining hand transfer and progressive automotive stamping dies and tooling.
    6. Scheduled overtime and manpower to meet the needs of the production lines.
    7. Resolved computer program operational problems.
Years of Experience
Experience
10+ Years
Experience Level
Level
Senior
Education
Education