Wafer Fab Operator Resume Samples

A Wafer Fab Operator takes responsibility for manufacturing chips that are typically used in a variety of electronic devices. The major duties associated to this post are listed on the Wafer Fab Operator Resume as – cutting wafers into small individual pieces so that it can hold multiple chips, loading the wafer equipment, keeping the rooms clean and free of dust and other materials; ordering supplies, performing quality control testing; cleaning and drying photomasks; inspecting photomasks for defects, and testing functionality of circuitry using electronic test equipment.

Those interested in this field should mention on the resume the following skills – physical fitness; stamina, attention to safety, teamwork; and dexterity. Other crucial skills are – knowledge of using small microchips and familiarity with quality control testing. Some employers prefer a degree for this position, while many others necessitate only a high school diploma.

Wafer Fab Operator Resume example

Wafer Fab Operator Resume

Objective : Seeking a Wafer Fab Operator position with a company looking for an individual with hands-on approach and ready to meet any challenges to join the team. Skills and experiences in Semiconductor manufacturing/ laboratory/ quality assurance control.

Skills : Clean Room Environment, Coordinating Skills, Interpersonal Skills.

Description :

    1. Maintained production supplies.
    2. Responsible for the accurate and compliant manufacturing of various silicone products, utilizing a variety of automated and semi-automated equipment and processes.
    3. Operated mixing machines, coating machines, and cutting and packaging machines under SOP and GMP guidelines.
    4. Performed basic trouble-shooting and maintain equipment cleanliness.
    5. Interfaced and worked with engineering and senior manufacturing personnel in identifying and implementing process improvements and process validations.
    6. Monitored and recorded critical process parameters.
    7. Performed a wide variety of skilled duties in the preparation and operation of process equipment.
Years of Experience
Experience
2-5 Years
Experience Level
Level
Executive
Education
Education
H.S. Diploma In General


Wafer Fab Operator Resume

Objective : As a Wafer Fab Operator, responsible for Dis positioning wafers through the semiconductor wafer manufacturing production process, including photo lithography, plating, polish, and vacuum areas, etc,.

Skills : Operating Skills, Manufacturing Skills, Multitasking.

Description :

    1. Operated TEL ACT8, machinery to spin-coat, develop, and expose the image onto wafers.
    2. Became skilled in multiple areas and forming a close working relationship with management, technicians, engineers, process technicians, trainers, and operators.
    3. Used microscopes to evaluate the visual appearance compared to the goal.
    4. Entered measurement data into a computer database.
    5. Informed management and engineers of any unexpected results.
    6. Adhered to Fab safety and cleanliness guidelines.
    7. Accurately communicated tool and lot status to colleagues on the ensuing shift.
            Years of Experience
            Experience
            2-5 Years
            Experience Level
            Level
            Executive
            Education
            Education
            H.S. Diploma In General


            Wafer Fab Operator Resume

            Objective : Highly qualified Wafer Fab Operator with experience in the industry. Enjoy creative problem solving and getting exposure on multiple projects, and I would excel in the collaborative environment on which your company prides itself.

            Skills : MS Office, Project Management Skills, Operating Skills, Communication Skills.

            Description :

              1. Performed a combination of tasks to fabricate integrated circuits on semiconductor wafers according to written specifications.
              2. Assigned to the Pattern Sapphire Substrate process; performed duties within a team environment.
              3. Selected in a leadership role responsible for training new hire technicians on company processes.
              4. Followed all outlined procedures and qualified machinery per protocol.
              5. Loaded semiconductor into processing containers using the vacuum wand or slide transfer.
              6. Operated FILMETRICS tools to measure Si02 film thickness and photoresist thickness.
              7. Inspected wafers for defects, scratches, contamination, or any abnormal pattern using NIKON microscope or ZETA computer inspection equipment.
            Years of Experience
            Experience
            2-5 Years
            Experience Level
            Level
            Junior
            Education
            Education
            GED

            Wafer Fab Operator Resume

            Objective : Wafer Fab Operator with 5 years of experience in Recording data in the WIP tracking system. Responsible for Analyzing data and reporting anomalies to the Production Supervisor if needed, etc,.

            Skills : MS Office, Project Management Skills, Operating Skills, Communication Skills, Developing Skills.

            Description :

              1. Operated equipment to deposit SiO2 films using the 6inch sequel tool.
              2. Able to make any minor jams.
              3. Operated NOVELLUS equipment to deposit SiO2 films using the 6inch sequel tool.
              4. Used microscopes to evaluate the visual appearance compared to goal.
              5. Oversaw and led a team of 100+ direct labor operators, 4 production supervisors, 2 industrial engineers, and a fab services manager.
              6. Developed, modified, and/or continuously improved manufacturing processes and procedures to enable higher productivity, reduced scrap, and improved quality.
              7. Owned and ensured compliance with cycle time, on-time delivery, and factory activity requirements.
                      Years of Experience
                      Experience
                      2-5 Years
                      Experience Level
                      Level
                      Junior
                      Education
                      Education
                      GED

                      Wafer Fab Operator Resume

                      Objective : Wafer Fab Operator with 2 years of experience in Supporting continuous improvement initiatives in the areas of productivity, yield enhancement, scrap reduction, etc,.

                      Skills : Inventory Control, Shipping And Receiving, Purchasing, Production.

                      Description :

                        1. Skilled with many tasks and responsibilities.
                        2. Moved into lead operator in a short amount of time.
                        3. Skilled areas; photo (all layers), etch, de-tape/Tape, Grind, Back metal, Irradiation, front metal, diffusion, wafer handling, Lead task, Process Technician process, minor tool PM's, and repair tools in areas dealing with the metal coating process and de-tape/tape.
                        4. Assisted in training employees with wafer processes in numerous cell areas.
                        5. Collaborated with management and engineers with improving workflow and refining handling process.
                        6. Experienced Fab operations, assisted with relieving areas overwhelming flow issues, and process flow concerns.
                        7. Ability to learn quickly allowed me to work all shifts and assisted the company in pushing products through the line as needed.
                      Years of Experience
                      Experience
                      2-5 Years
                      Experience Level
                      Level
                      Executive
                      Education
                      Education
                      Bachelor Degree

                      Wafer Fab Operator Resume

                      Objective : Seeking a Wafer Fab Operator profession with an outstanding career opportunities that will offer a rewarding work environment along with a winning team that will fully utilize management skills, etc,.

                      Skills : MS Word, Accounts Receivable, Organizational Skills.

                      Description :

                        1. Sorted semiconductor wafers in processing containers or equipment holders, by scanning and using the computerized tool.
                        2. Loaded and unloaded equipment chambers and transport finished product to storage or to the area for further processing.
                        3. Provided information to supervisors and coworkers, by radio, by writing notes and updates in tool history, or in person.
                        4. Developed specific goals and plans to prioritize, organize, and accomplish work.
                        5. Used computers and computer systems (including hardware and software) to scan, set up functions, enter data, or process information for wafers.
                        6. Expedited (Lots) of wafers by delivering with carts or by hand carry to different work bays and departments for quicker processing.
                        7. Worked in a cleanroom environment with clean suits, masks, gloves, and boots.
                      Years of Experience
                      Experience
                      2-5 Years
                      Experience Level
                      Level
                      Executive
                      Education
                      Education
                      Bachelor Degree

                      Wafer Fab Operator Resume

                      Objective : A Highly adaptable individual with strong organizational skills and meticulous attention to detail seeks a position with the opportunity for growth and career advancement.

                      Skills : Wafer Fab Operator, Machine Operator, Communication Skills.

                      Description :

                        1. Measured the overlay width of the critical structure of the wafer.
                        2. Processed wafers from the coating, exposing, developing, and baking using FSI, Canon, Nikon, Suss aligner mask. 
                        3. Completed physical activities that require considerable use of your arms and legs and moving your whole body, such as climbing, lifting, balancing, walking, stooping, and handling of materials.
                        4. Checked the priorities list on the schedule.
                        5. Ran wafers with HOT lot tags on the wafer boat.
                        6. Used Ready to run all kinds of wafers tool.
                        7. Communicated with maintenance and process technicians.
                        8. Developed team members and cultivate the organizations next set of leaders.
                      Years of Experience
                      Experience
                      2-5 Years
                      Experience Level
                      Level
                      Executive
                      Education
                      Education
                      G.E.D

                      Wafer Fab Operator Resume

                      Objective : Resourceful, dynamic Wafer Fab Operator professional with a broad range of expertise in fast-paced business environments. Highly skilled in operations and sales, logistics, and resource optimization. Strong leader and motivator who excels in teaching and training employees. Flexible, adaptable, results-driven and committed to quality process and product.

                      Skills : Organizational Effectiveness Customer Service Quality, Monitoring Skills.

                      Description :

                        1. Inspected materials, components', or product for surface defects and measure circuitry, using electronic test equipment, precision measuring instruments, microscope, and standard procedures.
                        2. Studied work orders, instructions, formulas, and processing charts to determine specifications and sequence of operations.
                        3. Maintained processing, production, and inspection information and reports.
                        4. Inspected equipment for leaks, diagnose malfunctions and request a repair.
                        5. Monitored operation and adjust controls of processing machines and equipment to produce a composition with specific electronic properties, using computer terminals.
                        6. Calculated etching time based on the thickness of the material to be removed from wafers.
                        7. Aligned photo mask pattern on the photoresist layer, expose pattern to ultraviolet light, and develop a pattern, using specialized equipment.
                      Years of Experience
                      Experience
                      2-5 Years
                      Experience Level
                      Level
                      Executive
                      Education
                      Education
                      G.E.D

                      Wafer Fab Operator Resume

                      Objective : As a Water Fab Operator, Responsible for wafer fabrication such as aligning, masking, etch and diffusion. Experience in Performing equipment set-up, calibration and routine preventative maintenance tasks, etc,.

                      Skills : Multitasking, Inventory Management, Able To Work As A Team Or As Individual, Purchasing, Customer Oriented.

                      Description :

                        1. Measured and inspected the inside of fabricated microchips for damage.
                        2. Damaged research and identified at what Manner the damage occurred and reprocess.
                        3. Quickly gained the ability to operate 5 machines at one time, including machines located at the other side of the plant all while still being able to keep up productivity.
                        4. Used team player, Played a major role in increasing fertility.
                        5. Worked well with diverse groups of people.
                        6. Manipulated valves, switches, and buttons, or key commands into control panels to start semiconductor processing cycles.
                        7. Developed in SVG, CD measurement, and probing wafers using a Nikon microscope.
                      Years of Experience
                      Experience
                      2-5 Years
                      Experience Level
                      Level
                      Junior
                      Education
                      Education
                      High School

                      Wafer Fab Operator Resume

                      Objective : A hardworking and highly motivated worker seeking to secure a full-time position with your company that allows us the opportunity to demonstrate and continue to develop my leadership skills and talents to contribute to overall company growth.

                      Skills : Assisting Skills, Researching Skills, Multitasking. 

                      Description :

                        1. Performed a furnace used to grow chemicals and elements on wafers.
                        2. Used lab utensils and tools when handling wafers.
                        3. Inspected wafers for quality control after they came out of the furnace.
                        4. Logged data to keep track of wafers within the fab.
                        5. Used the Text Box Tools tab to change the formatting of the pull quote text box.
                        6. Responsible for gauge studies on select tools as well as responsible for running experiments, tracking lots, analyzing data, identifying deviations.
                        7. Able to use the systems for the purpose of updating specifications, whether for process and or tool dispositions as well as manufacturing operational.
                      Years of Experience
                      Experience
                      2-5 Years
                      Experience Level
                      Level
                      Executive
                      Education
                      Education
                      High School