As an Associate RF Engineer, the person will complete several complex duties such as designing, testing, integrating, maintaining and implementation the radio frequency sub-systems like the base station, radios and mobile phone. The list of key responsibilities are listed on the Associate RF Engineer Resume as follows – making sure the project completes on time, identifying technical glitches, resolving such issues, maintaining records relating to the conducted test procedures; developing presentation for the management, assisting in designing high-performance RF products, conceptualizing new designs and acting as technical lead in the absence of the Senior RF engineer.
To work at this capacity the following skills are required – excellent ability to carry out research, ability to identify the technical problems, passion to learn and stay updated on the latest developments and knowledge of developing new products using innovative ideas. The basic requirement includes a bachelor’s degree in electrical engineering or any other technology-related domain.
Objective : Associate RF Engineer is involved in learning how to perform the analysis, design, implementation and enhancement of wireless telecommunications networks. These include existing and planned networks for cellular and digital mobile phone and data transmission networks.
Coordinated Installing JDSU Agilent and create workspaces in all the kits, co-ordination of drive teams.
Performed drive test for the 4G LTE device using NEMO handy.
Data Collected and frequency scan of UMTS, GSM and LTE networks for handoffs and data throughout.
Analysised of Agilent logs in ACTIX and MapInfo - detailed analysis of layer 3 messagindg, Call drops, access fails etc.
Trouble shooted and calibrated drive test equipments.
On Air Cell Site Verificatedn TEMS Pocket and NEMO Handy.
Based on statistics, recommend solutions to improve performance.
Experience
2-5 Years
Level
Executive
Education
Bachelor Of Science
Sr. Associate RF Engineer Resume
Summary : Over 6yrs of Extensive experience of 3GPP, 3GPP2 and Carrier Acceptance Requirements and Specifications Experienced in testing and validation of devices against AT&T and Verizon test plans. Good understanding of Modem, OS and RIL and Network protocols. Experienced in VoLTE testing, IMS test plans of Verizon and AT&T, IMS protocols SIP, RTP and RTCP.
Skills : C, C++, Matlab, Linux, MS Word, Excel, PowerPoint, Access, Spice and Circuit Maker.
Description :
Verifyedcell sites physically for sector and cable swap, orientation, tilt of antennas.
Troubleshooted and resolved issues related to the software on the drive.
Troubleshooted and assisted other drive teams when needed.
Received training and worked closely with RF Engineers, Core Engineers and MME Engineers.
Adjusted the antenna pattern and positioned test vehicle position to achieve the best possible MIMO and 100% at some test locations.
Network deploymented and optimized in the pacific northwest, midwest, Massachusetts, Virginia.
Performed RF drive testing to carry out propagation and signal measurement.
Experience
10+ Years
Level
Senior
Education
Master Of Science
Jr. Associate RF Engineer Resume
Headline : Associate RF Engineer is an entry-level position that requires background knowledge in cellular systems, mobile radio propagation environment, widely used prediction models and measurement techniques.
Skills : Testing, Problem Resolution, Data Entry, Databases, Microsoft Office, Troubleshooting.
Description :
Performed Drive Test & basic Optimization for GSM/UMTS/LTE wireless data networks applications and simulators.
Comprehend and follow testing procedures for UMTS & GSM networks in the areas of Voice, SMS & Data Services for AT&T and T-Mobile.
Analysised for Call Drop and Call Setup Failure through processing of Log Files.
Basic optimized RF related parameters and analyzing Drive log files, site data and signal propagation measurement and KPI traffic, and communicates test results to Senior RF engineers.
Analysised, Interferenced and Coveraged Analysis and suggest for changes to be made in network to optimize the given network as to minimize coverage holes & interference.
Performed analysis of measured data, in order to modify network design and enhance performance.
Experience
5-7 Years
Level
Junior
Education
Bachelor Of Science
Associate RF Engineer III Resume
Summary : Seeking a job opportunity to work for a progressive organization in a highly motivating and challenging environment that provides the best opportunities to grow and utilize potential to the fullest to achieve the organization's goal.
Skills : TECHNICAL Proficient With PC Platform, Microsoft.
Description :
Executed detailed AT&T VOLTE testing on wireless networks using JDSU, NEMO Outdoor and 3G testing on UMTS.
Experienced using the new Anova setup for JDSU and troubleshooting.
Performed Site Shakedown and Mobility Cluster Drives while working with RF engineering staff.
Collected test data for network performance indicators like signal strength, data throughput, and handovers.
Planned and runned of AT&T Drive test and post processing analysis for interfernce and coverage problem solving.
Ensured that newly integrated sites are tuned and provide provide optimum performance with refernce to existing nodes and frequencies.
Ensured the deployment of an optimum system, making sure that service coverage is in line with the objective and the strategy adopted by the service provider.
Experience
10+ Years
Level
Senior
Education
Computer Networking
Associate RF Engineer II Resume
Summary : Expertise in troubleshooting, testing and post processing of RF data acquired through RF Drive testing techniques, and procedures including neighbor list optimization and prioritization, PSC/PCI/PN planning and optimization as well as RF optimization recommendation including azimuth, downtilt and power changes etc.
Skills : Microsoft Office, Project Coordination, MapInfo, RF Drive Test Tools.
Description :
Responsible for the comparative study of the major competitive mobile service providers on the basis of the QoS and technologies used by them.
Tracked project status and schedule, generate status reports, and track submission of deliverables.
Covered the technologies of LTE, WCDMA, GSM, CDMA.
Advanced Topics in Wireless Communication course focuses on 4G and emerging wireless systems and technologies.
Performed pre-launch & post-launch 4G LTE testing as per AT&T request.
Devised test plans, test site scheduling, equipment calibration and setup, RF signal measurement and data analysis.
Measured field data for the base site to identify RF signals frequencies and respective powers.
Experience
7-10 Years
Level
Management
Education
Business Administration
Associate RF Engineer I Resume
Summary : Goal-oriented Electrical engineer dedicated to high levels of customer satisfaction and meeting aggressive business goals. Hardworking and excellent team player with specialized knowledge and work experience in RTLS, RF, RFID, Wi-Fi and Networking technologies.
Skills : R Programming, Excel, Powerpoint, GitHub, C, Tableau, Matlab.
Description :
Experienced in drive testing and troubleshooting Clearwire 4G Wi-Max networks using commercial field test and data analysis tools like TEMS and XCAL software.
Reviewed RF design coverage maps and identify problem areas in terms of coverage, interference and pilot pollution.
Planed and executed tasks to optimize RF clusters in the customer network during the deployment phase.
Carried out acceptance test procedure (ATP) for 3G and 4G Wi-Max networks to examine the download and upload speeds, Tx power, preamble, RSSI, BSID etc.
Responsible for Hand-off testing, cluster drives and stationary testing.
Defined the requirements and establish the design criteria to identify the network planning tools to use and the required databases.
Performed measurement integration into the planning tool; in order to tailor the tool for the specific design market environment.
Experience
7-10 Years
Level
Management
Education
Electrical Engineering
Assistant Associate RF Engineer Resume
Summary : Include linking budgets, system dimensioning for coverage and capacity including traffic analysis, site RF equipment, initial system design and dimensioning, RF coverage planning, site identification and evaluation, frequency planning and interference analysis.
Skills : AutoCAD, Control Panel Design, PLC Programming, MATLAB, SABER.
Description :
Developed cellular network solutions based on the customer’s growth plans, capacity constraints, new features, and technologies.
Responsible for gaining the skills to ensure the technical content on cellular network projects by analyzing the customer’s requirements and ensuring that the network solutions proposed will meet the optimum needs of the Wireless customer.
Applied their technical knowledge to issues related to the development of the RF Network Design and Optimization.
Worked with field tasks as well as low-level design and optimization.
Maintained a general understanding of wireless communication principles and theories as they apply to the design, operation, and optimization of wireless networks.
Provided required maintenance on cell sites including radio swaps, script loading, dc power equipment commissioning, battery upgrades, alarm troubleshooting,
Completed closeouts complete reports on antenna performance and troubleshoot issues.
Experience
7-10 Years
Level
Management
Education
Master Of Science
Associate RF Engineer/Specialist Resume
Objective : Experience in performing Optimization for Sprint Network for LTE/CDMA/EVDO. Extensive experience in performing Optimization of wireless networks for AT&T for establishment of WCDMA/LTE. Experience on RAN signaling calls flows, RAN development experience to have in-depth knowledge on the call processing on CDMA/EVDO/WCDMA/LTE.
Skills : RF Planning, RF Optimization.
Description :
AT&T Involved in comparing different carriers like Verizon, T-mobile, Sprint with AT&T (2G&3G) for the analysis of the network.
Collected RF data for the given cluster using Ascom Symphony kit.
Detailed sensitivity analyses on issues like BLER, power control, Uplink RSSI, mobile transmit power etc.
Monitored & Analyzed Layer3 messages in every carrier when test is going on in Q-VOICE tool and monitor that all sbc's are registered in Emu server.
Provided the recommendation of additional T1, RAX and TX boards as per requirement.
Identified base station sites for system coverage provision.
Performed site surveys with other network implementation teams, in order to verify suitability of the sites for zoning, acquisition and construction.
Experience
2-5 Years
Level
Executive
Education
Electrical Engineering
Associate RF Engineer/Technician Resume
Objective : Associate RF Engineer with over 6 Years of experience in Wireless technology as RF Professional performing RF Optimization, Design and Performance Engineering for wireless systems. Worked as RF Engineer in telecom companies like Sprint, Samsung America, AT&T, Ericsson and Bharti Airtel Ltd (India's leading Telecom Company).
Skills : QXDM, QPST, QCAT, HP QualityCenter, Spirent, LTE testing, VoLTE testing, UMTS/GSM testing.
Description :
Analyzed and Reviewed collected wireless signals using Actix Spotlight.
Performed Site configuration analysis, Neighbor Analysis, Pilot pollution analysis, parameter configuration and IRAT neighbor analysis.
Reviewed and validated drawings and plumbing diagrams of RF antenna systems.
Prepared preliminary and final RFDS using CSS and other design document to support design team.
Analyzed the collected data to find various trouble areas in the network, overshooting cells, coverage holes, and areas of poor pilot dominance and scrambling code plan collisions.
Included preparation of drive routes, optimization of antenna configuration (pre and post drive test).
Worked with cross-functional CRHF teams on telecom/radio regulatory certification efforts.
Experience
2-5 Years
Level
Executive
Education
Masters
Associate RF Engineer Resume
Summary : Telecommunications Engineer with a Masters in Electrical Engineering and experience performing testing for mobile devices in the latest network technologies like CDMA, EVDO, UMTS, LTE and VoLTE. Seeking a position with an industry-leading telecom company. Linux Network protocols C Programming JDSU MATLAB Microsoft Tools QXDM IBWave Design WireShark.
Skills : Data Mining, Data Modeling, Machine Learning, Analytics.
Description :
Tested in 3G, 4G, 2.5 LTE Dual band testing DAS In-Building Testing, Mapping, Cluster drives.
Used Dell laptops with XCAL-M testing software, Net Gear Hotspot, LG Vipers and S4 Mini.
Tested for Throughput, Latency, Connectivity, Handover Team lead.
Trained of new technicians in data collection on CDMA and LTE formats.
Trained ranged from equipment setup to recognition of proper testing parameters, I.E.
Optimized of wireless networks for AT&T in Houston (TX) for establishment of UMTS network with 3rd carrier.
Supported departmental and cross functional process improvement teams.
Creating an account is free and takes five seconds.
You'll get access to the PDF version of this resume template.
Choose an option.
Sign up with Google
Sign up with Facebook
Sign up with Linkedin
This helps us make sure you're human and prevents spammers from abusing our services.
By continuing, you agree to our Privacy Policy and Terms.
Unlock the Power of Over 10,000 Resume Samples.
Take your job search to the next level with our extensive collection of 10,000+ resume samples. Find inspiration for your own resume and gain a competitive edge in your job search.
Get Hired Faster with Resume Assistant.
Make your resume shine with our Resume Assistant. You'll receive a real-time score as you edit, helping you to optimize your skills, experience, and achievements for the role you want.
Get Noticed with Resume Templates that Beat the ATS.
Get past the resume screeners with ease using our optimized templates. Our professional designs are tailored to beat the ATS and help you land your dream job.
