Calibration Engineer Resume
Summary : As a Calibration Engineer, calibrated diagnostic thresholds to meet CARB regulations. Provided regular overview summaries and detailed reports on specific assignments, including timing projections Collecting vehicle data using advanced diagnostic and measurement tools. Analyzed data to compare performance to specifications.
Skills : Vendor Management, Installation
Commissioning Of The Plant In Instrumentation Automation Stream, Project Costing.
Description :
- Functioned as working Supervisor for the Calibration/Metrology Lab in conformance with ISO-9002, ANSI-Z540 and ISO-17025.
- Supervised Calibration and Metrology Lab Technicians and Engineers.
- Interfaced with Manufacturing, Quality and Facilities department to assure product coordination.
- Interfaced with Human Resource for the hiring of new Technicians.
- Developed calibration procedures and work instruction for Technicians to follow.
- Interfaced with other calibration department located at Hutchinson, MN and Eau Claire, WI.
- Responsible for establishing a calibrations department and lab.
Experience
10+ Years
Level
Senior
Education
BEng
Calibration Engineer Resume
Headline : As a Calibration Engineer, Managed all technical aspects of the OBD diagnostic calibrations to meet CARB regulations. Identified system requirements during system hardware design to ensure a robust diagnostic system. Used standard instrumentation toolsets for data acquisition, storage, and analysis.
Skills : Storyline, Camtasia, Content Development, Instructional Design.
Description :
- Fluke Authorized Service Center for Repair and Calibration.
- Supervised incoming and outgoing items for repair and calibration.
- Conducted In-house and on-site training. Commissioned and Installed of Equipment's.
- Created software using VB.Net and Access to be used as Calibration Management System.
- Communicated with Fluke Service Center for RMAs and other services between Fluke and Mejdaf agreement.
- Performed calibrations in Pressure, Thermometry, Pressure and Electrical calibration in accordance with the ISO 17025 requirements.
- Communicated with customers about technical inquiries.
Experience
5-7 Years
Level
Executive
Education
BSE
Calibration Engineer Resume
Objective : As a Calibration Engineer, responsible for identifying faulty equipment and suggesting upgrades when necessary and maintained calibration equipment and supplies. Completed job cards and equipment reports.
Skills : Storyline, Camtasia, Content Development, Instructional Design.
Description :
- Performed and validation all calibration Diesel engine controls for performance and emissions.
- Participated in various calibration improvement of engines and assess it in laboratory and, all cold, hot and altitude fields.
- Managed and implemented all pre calibration processes and apply it effectively to all vehicle levels.
- Determined and maintained all hardware and software tools and coordinate with various engine management system.
- Assisted other departments and define specifications related to hardware tools and subsystem and ensure achievement of future calibration goals.
- Designed platform for processes related to ECM calibrations like speedometer/ odometer, fuel measurer and other diagnostics.
- Designed and facilitated all common calibration procedures with organization.
Experience
2-5 Years
Level
Executive
Education
BEng
Calibration Engineer Resume
Summary : Calibration Engineer with 8+ years of experience in a fast paced, quickly growing work environment. Diverse experienced in product and software development, establishing and implementing quality systems for engineering and production, design of experiments for proof testing new concepts.
Skills : Machine Design, Solidworks, Pro|Engineer, Automatic Transmission Calibration, Automatic Transmission Design.
Description :
- Created clean-sheet design of automatic transmission shift schedule and drive force demand maps for next-generation powertrain.
- Progressively developed novel, semi-automated design process to balance drive force characteristics, fuel economy, and drivability.
- Wrote a MATLAB tool to consolidate new design process with design parameters, improving design process efficiency by at least an order of magnitude.
- Implemented this new method to a Japan-led vehicle development project during Japan travel, setting the precedent of drive force calibration for the majority of future Toyota vehicles.
- Utilized DRBFM process to proactively anticipate and determine root cause of software issues and shared with software development group, allowing them to efficiently develop countermeasures to meet project deadlines.
- Organized and led weeks-long test trip with international team of engineers to determine suitability of pre-production vehicle calibration.
- Interpreted the Woodward On Highway Series 6 (OH6) Control system software algorithm models in MATLAB, test their intended function on the bench and engine dyno, and recommended changes to software engineers for proper operation and efficiency.
Experience
7-10 Years
Level
Management
Education
BSE
Calibration Engineer Resume
Objective : Calibration Engineer with extensive experience in Product Development and optimization of Powertrain Control System calibrations on multiple Powertrains. Proven success meeting or exceeding customer performance expectations and federal emission and fuel economy standards. Recognized as a team player with strong communication and problem solving skills and the ability to manage multiple assignments simultaneously with an emphasis on quality.
Skills : Powertrain Electronic Controls Calibration Engine, Performance Optimization, Calibration Procedure Optimization.
Description :
- Developed and advised Woodward engineers on calibration procedures and create calibration guides documenting algorithm operation and calibration procedures for customers in Asia using Woodward MotoTune and Toolkit calibration tools for Natural Gas engines for use in buses and commercial vehicles.
- Part of the ETC Safety Monitored and Torque Security team defining the requirements, developing the necessary algorithms and testing and calibrating these features.
- Completed State and ISO requirements for licensing and continual technical training.
- Designed of Data Acquisition systems & software, writing user manuals.
- Worked on Diagnostic System Management and Diagnostic Inhibiter Calibration.
- Responsible for calibration schedule and repairs for all equipment used in the production of electronic devices and PLC's.
- Maintained automated calibration management application.
Experience
2-5 Years
Level
Executive
Education
BEng
Calibration Engineer Resume
Objective : As a Calibration Engineer, Experienced in Driver Assistance or Automated Driving systems, particularly L2 and higher systems. Experienced in vehicle dynamics simulation software such as Carmaker, Carsim. Prepared and managed software release schedule to meet development deadlines.
Skills : Agile, Scrum, TFS, Document Management, Microsoft Officr, Quality Assurance, JIRA, Microsoft Test Manager.
Description :
- Provided technical support of application and supported user base growth of over 300%.
- Performed a wide variety of calibration and testing tasks, including daily assembly-line explosives press calibration, scale calibration, with side.
- Purchased higher level calibration standards needed to meet or exceed NIST requirements for temperature and pressure.
- Performed temperature, pressure, flow, I/P, alarm card and multi-meter calibrations, kept records of all calibration results, started system.
- Coordinated software change requests between vehicle calibration and logic development teams.
- Managed calibration values across multiple vehicle program lines.
- Implemented change-control tracking, history and status reporting.
Experience
2-5 Years
Level
Executive
Education
BSE
Calibration Engineer Resume
Objective : As a Calibration Engineer, Experienced with Automated Driving vehicle motion controls development. Experienced with Robot Operating System (ROS). Worked within an Agile/Scrum software development process, particularly in a SAFe Agile environment.
Skills : Microsoft Office, Minitab, Use To Caliper, Micrometer, Dial Gage, LVT, Termometers, Read Out, Load Cells.
Description :
- Led the system integration issue discovery and resolution of software bugs, gaps in specifications, and specification conflicts.
- Collaborated closely with VF (Vehicle Function) writers to correct internal specifications errors.
- Collaborated closely with the vehicle build teams to solve any issues with inter-module communication on bench, mule vehicles (Gen2 and Gen3), and X1 vehicles.
- Collaborated closely with the systems team to solve any architectural issues with the Gen2 and Gen3 vehicles.
- Worked closely with the in-house software teams to develop a functional understanding of the algorithms and software in the various ADAS features. Understood of what each calibration parameter impacts relative to the ADAS algorithms will be critical to effectively begin calibration.
- Worked closely with partner teams to understand feature level KPIs and translate these targets into lower-level calibration impacts.
- Developed specifications for and selection of future test equipment, and conducted software and controlled testing. Documented test results.
Experience
0-2 Years
Level
Entry Level
Education
BEng
Calibration Engineer Resume
Objective : As a Calibration Engineer, worked closely with the customer on application software and powertrain control interfaces. Prepared reports and presentations related to status of calibration activity and any special topics or problem resolutions as required.
Skills : Illustration / Graphic Design, Animation, Adobe Creative Suite.
Description :
- Understood and applied engine operating fundamentals, engine management strategies, and calibration techniques.
- Completed solid engine and application calibrations in a timely manner, meeting the customer performance targets.
- Tested new and existing engine products, as required, validating suitability for use in customer applications.
- Provided technical support to our customers on all aspects of their application as it relates to our products and calibration.
- Worked knowledge of PC-based presentation, spreadsheet, & word processing software.
- Defined engine control unit calibration strategies to meet product targets.
- Led and coordinated associated calibration project resources.
Experience
2-5 Years
Level
Executive
Education
BSE
Calibration Engineer Resume
Objective : As a Calibration Engineer, involved the development and release of ADAS calibrations for both Aptiv's customers and Aptiv's core projects. Maintained the calibration change management system, calibration ownership assignments, and calibration software deliverables. Engaged heavily with cross functional teams, have high level of analytical activity, and in-vehicle/bench calibration development. Collaborated with algorithm/software development team is key.
Skills : Planning, Developmental Skills.
Description :
- Participated in engine optimization tests on an engine dynamometer, chassis, and on water.
- Developed a network of contacts in all product development departments around the world.
- Familiared with the various tools and software solutions used in your work environment.
- Collaborated on the development of engine control unit software.
- Helped to diagnose system malfunctions and vehicle responses.
- Established calibration methodologies to reduce development time.
- Released and managed calibration software deliveries. Lead calibration peer reviews to ensure quality of work.
Experience
2-5 Years
Level
Executive
Education
BEng
Calibration Engineer Resume
Headline : As a Calibration Engineer, maintained vehicle fleet related to flashing TCU with latest software, vehicle SW version history, calibration status, EOL data matching, process statistics, etc. Supported diagnosing and corrected problems on customer powertrain test stand, dyno testing and prototype vehicles.
Skills : Maintenance Skills, Problem Solving.
Description :
- Developed calibration parameters to meet performance, quality and timing requirements.
- Utilized analysis techniques and tools to verify calibration quality.
- Maintained configuration of in-vehicle calibration instrumentation.
- Coordinated offsite calibration development trips. Support resolution of customer issues.
- Ensured Calibration Procedures are maintained and up to date.
- Reviewed calibrations throughout vehicle program to guarantee high quality execution.
- Made tuning and measurements on the vehicle. Diagnosed and assisted in correcting problems on the vehicle related to hardware/software integration.
Experience
5-7 Years
Level
Executive
Education
BEng
