A Certification Engineer undertakes the duty of performing technical and administrative engineering tasks to sustain and secure FAA certification and provide leadership in general aviation for aircraft and engine performance. Other core duties are listed on the Certification Engineer Resume as – preparing engineering drawings, reports, and data to be used for FAA certification; coordinating FAA approvals of major and minor design changes, and repairs; directing meetings and technical presentations, performing checking of drawing quality, applying technical knowledge of programming skills, and leading engineering R&D projects using appropriate test resources.
The most sought-after qualifications include – the ability to apply technical knowledge and programming skills in solving complex problems, knowledge, and expertise on RAM product line, proficiency in MS Office Word, and CAD drafting; and knowledge in aerospace materials and hardware. An engineering degree along with several years of experience in a relevant field is a common requirement.
Headline : Participating in family staffings for each child with the child development team, bus driver, community agencies, therapists, and DHS worker or family support and/or resource people as appropriate for planning and sharing information.
Skills : Airframe & Powerplant, FCC GROL, Avionics Line Maintenance.
Description :
Wrote and compiled TSO C127a data packages that complied with 14CFR 25.
Guided and instructed PMs and PEs on the certification process from RFQ and initial technical coordination meeting (ITCM) through PRD, CDR, and final TSO release.
Wrote test plans/reports for 16G dynamic, 25.785 decentralization, electronics compliance, head path analysis, vertical and oil burn of stack-ups and cushion test coupons, drawing lists,.
Planed included testing most critical situations, set up instructions, similarity path and detail part analysis, interface loads.
Procured test articles through the supply chain.
Interfaced with internal and external customers, airframers, and international consultants.
Explained the various certification paths available to produce a superior product for happy customers.
Experience
5-7 Years
Level
Executive
Education
GED
Certification Engineer Resume
Headline : Mid-Level Certification Engineer offering years of experience in stress analysis in both manufacturing and traditional settings with proven ability to perform hand calculations to validate solutions using fundamental engineering principles. Expert in ANSYS Workbench FEA software with the capacity to learn new FEA packages with very little training needed.
Skills : MS Office, Manufacturing Skills.
Description :
Participated in PRD, CDR, and FDR.
Performed, monitored, or assisted with testing as required.
Responsible for coordinating with the internal team to organize and complete qualification testing.
Responsible for creation of plans schedules and handling the quotes with outside labs.
Coordinated with Engineering, Vendors and Customers in solving technical and certification issues.
Extensived contact with customers on aircraft interior designs.
Ensured that the safety critical aspects of product designs are effectively controlled and deployed to the manufacturing process.
Experience
5-7 Years
Level
Executive
Education
MS
Certification Engineer Resume
Objective : MS in Certification Engineer with research on FEA modeling of composite structures. Working as a Design Validation Engineer in Zodiac Aerospace for more than 5 years and completed over 500 full seat crash analysis with a 95 % prediction in structural integrity and 85% prediction in HIC (head injury criteria).
Knowledged of interfacing with databases to extract and correlate diverse data for analysis. Strong query language knowledge.
Understood how to create reports based on complex queries.
Understood user interfaces and the creation of a positive user experience.
Handled multiple projects and being able to track and communicate issues to stakeholders.
Provided compliance guidance to cross-functional teams at early stage.
Collaborated with internal (RF, EE, ME, SW) and external teams (labs, CMs, agents).
Provided quick certification assessment based on changes from different design teams.
Experience
2-5 Years
Level
Executive
Education
BS In Electrical Engineering
Certification Engineer Resume
Summary : Seeking a Certification Engineer position with an outstanding career opportunity that will offer a rewarding work environment along with a winning team that will fully utilize management skills.
Skills : Communication Skills, Interpersonal Skills.
Description :
Created Master Drawing List, compile/submit all required data for TSO approval, maintain all dept.
DRB-signatory reviewed & acceptance for accuracy, determination of testing requirements & change classification, development of F/A inspection plans & equipment required.
Reviewed of Customer SOW - multi-departmental team & management meetings to update status & schedule, clarify & resolve certification & quality requirements & issues & to ensure customer & regulatory compliance.
Evaluated supplier ability to meet CFR requirements to qualify additional flammability test facilities.
Wrote POs for all outside testing & vendor-supplied test articles.
Interfaced with suppliers concerning requirements, results & discrepancy issues.
Created or reviewed test plan/reports & all required data, coordinated manufacture of required test articles & interface with production personnel.
Experience
7-10 Years
Level
Management
Education
Diploma
Certification Engineer Resume
Summary : To utilize my experience in the integration, operation, testing, certification, and support of electrical/ avionics equipment onto commercial and military aircraft.
Skills : Microsoft Office, Autocad, Electrical, Electronics, Certification.
Description :
Employed as a Certification Engineer responsible for the structural sizing, testing (both structural and occupant injury criteria), and final certification of seat installations under FAR, JAR, and TSO requirements as applicable.
Interacted with the airlines, airframe contractors, and the authorities.
Included preliminary finite element sizing thru to final design.
Responsible for the sizing (both static and fatigue), drawing sign-off, strength documentation of frames in the fore (757-300), and aft (767-400ER) body sections.
Spent 11 years working in the Engineering Stress Office at de Havilland.
Spent in the fuselage analysis group, the next 5 in the nacelle/engine mount/main landing gear analysis group.
Promoted to Senior Engineer in SOFTWARE EXPERIENCE Microsoft Office: Word, Excel, Outlook, PowerPoint, Access, Visio, Project.
Experience
10+ Years
Level
Senior
Education
MS
Certification Engineer Resume
Summary : Over 30 years experience in the codes, standards, and regulatory arena for various appliances and equipment utilizing gas, oil, and electricity. Participating in industry meetings for such equipment related to federal, state, and local codes, product safety standards, and other codes and regulations related to energy efficiency, safety, emissions, and fire safety.
Skills : Vendor, Documentation Skills.
Description :
Served as certification expert for the company and answer all questions regarding flammability.
Prepared FAA-certified flammability test plans for various customers.
Prepared and submitted PMA packages to FAA.
Sent Notification of Change letters to customers when there are modifications to products that are covered by PMA.
Managed PMA database of our manufactured parts.
Worked through a Designated Engineering Representative (DER) with the FAA to define certification requirements for systems and equipment installed on various Boeing aircraft.
Reviewed vendor documentation (Honeywell and Jamco) to determine compliance to applicable FARs wrote test procedures and performed testing to support FAA certification of these systems and equipment.
Experience
10+ Years
Level
Senior
Education
BS In Chemical Engineering
Certification Engineer Resume
Objective : Expecting regulatory compliance (FCC, CE, SRRC, MIC, KC), Generating certification submission package and submitting to the regulatory agencies, and also Ensuring test reports quality, address TCB and Notified Bodies or other global regulatory agencies comments.
Skills : Engineer, MS Office, Managing Skills.
Description :
Performed analysis and prepared certification data for the Honeywell Primus Epic 4000 Display system for installation into the Hawker-Beechcraft Airplane.
Performed Safety review of Cabin Pressurization Control System, HIRF, AND Lightning Criticality Assessment Reports.
Contract extended and transferred to B200 program.
Prepared System Safety Analysis of Modified Flap Control System.
Prepared and modified many FTAs using Faulttree+ software.
Prepared data in accordance with; FAA FAR/JAR 25.1309, SAE-4754.
Oriented each family to the program providing information on all Early Head Start services and philosophy.
Experience
2-5 Years
Level
Executive
Education
BS In Electrical Engineering
Certification Engineer Resume
Objective : Meeting with a speech therapist, child development team, and appropriate managers on a monthly basis using meeting notes for documentation, and also Participating in IFSP meetings as requested by the special services coordinator.
Skills : Designing Skills, Packing Skills.
Description :
Created all documents needed for FAA certification and approval of Gulfstream aircraft.
Documented include mechanical, structural, and flammability test plans, STC Certification Plans, stress reports, and all related conformity paperwork.
Responsible for all material flammability testing for all aircraft.
Included identification of all materials to be tested, test plan creation, material flammability testing, and the submission of test results to FAA for approval.
Designed include galleys, cabin layouts, lavatories, avionics, etc.
Engineered support for modifications to existing aircraft both Gulfstream and other manufacturers.
Designed done using AutoCAD and CATIA software packages.
Experience
2-5 Years
Level
Executive
Education
MS
Certification Engineer Resume
Summary : Certification Engineer with 3 years of experience in Acting as a liaison for each family between Early Head Start and agencies in the community as appropriate, and also Reporting and documenting incidents of suspected child abuse and neglect to DHS and child development services supervisor within 24 hours of the incident.
Evaluated test cases, created test plans, conducted test procedures and compiled technical documents necessary for the Certification of aircraft interior products.
Technical documents prepared include Dynamic test plan and report, Static test plan and report, HIC analysis plan and report, TSO minor change report, Aircraft installation instructions, Interface load report, Master document list, Component maintenance manual, Center of gravity, and seat reference point (SRP) report.
Worked on 14 CFR Part 25 Certification of seat, bed, and divan projects involving Airbus, Boeing, Bombardier, Dassault Falcon, and Gulfstream airframes.
Performed, witnessed, and coordinated several static and dynamic structural substantiation testing.
Assisted and supervised/mentored in completion of minor to complex projects.
Reviewed and approved certification documents, design minor changes, and engineering drawings from a certification perspective.
Assisted Quality control department in preparing test article Conformity, test deviations, and final inspection of TSO'ed products for compliance.
Experience
7-10 Years
Level
Management
Education
Master Of Science
Certification Engineer Resume
Headline : Utilizing available program and community resources to best meet the needs of the program and the families served, Implementing, supporting, and following up with the family partnership agreement.
Skills : Certification, German Language, Microsoft Office.
Description :
Responsible for the preparation of all related product certification/qualification and engineering test planning and execution.
Responsible for the creation and coordination of EDRs/SDRL's, DDPs, and NOC package submittals and approvals.
Responsible for the timely preparation of engineering and qualification test procedures (QTP) and Qualification Test Reports (QTR) Similarity Analysis, Qualification Basis, and other related documents.
Possessed overall Knowledge of EMI/EMC and environmental Aerospace requirements.
Responsible to execute testing per appropriate plans and/or procedures.
Knowledged of flammability compliance-related requirements.
Responsible for supporting additional sustaining design and development activities.
Creating an account is free and takes five seconds.
You'll get access to the PDF version of this resume template.
Choose an option.
Sign up with Google
Sign up with Facebook
Sign up with Linkedin
This helps us make sure you're human and prevents spammers from abusing our services.
By continuing, you agree to our Privacy Policy and Terms.
Unlock the Power of Over 10,000 Resume Samples.
Take your job search to the next level with our extensive collection of 10,000+ resume samples. Find inspiration for your own resume and gain a competitive edge in your job search.
Get Hired Faster with Resume Assistant.
Make your resume shine with our Resume Assistant. You'll receive a real-time score as you edit, helping you to optimize your skills, experience, and achievements for the role you want.
Get Noticed with Resume Templates that Beat the ATS.
Get past the resume screeners with ease using our optimized templates. Our professional designs are tailored to beat the ATS and help you land your dream job.
