Combination Welder Resume Samples

A Combination Welder is accountable for welding metal parts and maintaining welding torches. Working for the automotive and aerospace sectors, these welders will perform a variety of tasks. The most common duties listed on the Combination Welder Resume include – assisting in the installation of various types of industrial pipes, performing welding in flat and overhead positions, performing preheating of workpieces, fabricating fixtures to carry out welding processes, assisting pipe welders in handling welding and fabrications, and training newly hired pipe welders.

The job requirements are knowledge of computer-aided design, dexterity, good vision, strong hand-eye coordination, the ability to follow safety protocols, knowledge of fabrication and hydrostatic testing, the ability to interpret blueprints, an amazing ability to weld 2G, 4G, and 6G conditions, skillful in operating power and hand tools, and a huge knowledge of various welding processes. It is necessary to have at least a high school diploma and a formal welding training to fit into this designation.

 

Combination Welder Resume example

Combination Welder III Resume

Summary : To obtain a position in an environment that provides opportunities for strong contributions to the organizational goals that also allows for the development of professional skills and ultimately becomes a supervisor. To take up a challenging position that values honesty, loyalty, good relationship, and excellent performance, and to translate the experience, knowledge, skills, and abilities into value for the organization.

Skills : Combination welder, Structural welding, Communication, Customer Service

Description :

    1. Weld components in flat, vertical, or in overhead positions.
    2. Required to understand and follow all safety protocols for all types of welding rather on land or within a ship.
    3. Ignite torches or start power supplies from generators and other power sources, to strike arcs by touching electrodes to the metal being welded, completing electric circuits.
    4. Laying out, positioning, alignment, and securing parts for straightedges, and the assembling of materials to include using combination squares, calipers, and proper measuring.
    5. Clamp, hold, tack-weld, heat bend, grind and/or bolt component parts to attain the required configurations and positions of welded materials.
    6. Detect faulty operation of equipment or defective materials, also have the responsibility to notify supervisors or management of found defects.
    7. Operate manual or semi-automatic welding equipment in order to fuse metal segments by using processes such as gas tungsten arc, gas metal arc, flux-cored arc, plasma arc, shielded metal arc, resistance welding, and/or submerged arc welding accordingly to the project's requirement.
    8. Responsible for monitoring the fitting, burning and welding processes in order to avoid overheating the parts, as well as to avoid the warping, shrinking, distortion, or expansion of materials being welded.
Years of Experience
Experience
10+ Years
Experience Level
Level
Consultant
Education
Education
High School Diploma


Combination Welder - Trainee Resume

Objective : Combination Welder, skilled in layout and design of sheet metal and pipe. Developed extensive knowledge of sheet rollers and breaks. Experienced forklift operator on various sizes and styles of forklifts. Skilled in the use of a variety of power tools and metal fabrication equipment including drills, drill press, edge planner, end mill, benders, power saws sanders, and grinders

Skills : Welding, Communication, Patience

Description :

    1. Operate safety equipment and use safe work habits. Weld components in flat, vertical, or overhead positions.
    2. Start power supplies and strike arcs by touching electrodes to metals being welded, completing electrical circuits.
    3. Clamp, hold, tack-weld, heat-bend, grind or bolt component parts to obtain required configurations and positions for welding.
    4. Detect faulty operation of equipment or defective materials and notify supervisors.
    5. Operate manual or semi-automatic welding equipment to fuse metal segments, using processes such as gas tungsten arc, gas metal arc, shielded metal arc.
    6. Monitor the fitting, burning, and welding processes to avoid overheating of parts or expansion of the material.
    7. Examine workpieces for defects and measure workpieces with straightedges or templates to ensure conformance with specifications.
    8. Recognize, set up, and operate hand and power tools common to the welding trade, such as shielded metal arc and gas metal arc welding equipment.
Years of Experience
Experience
0-2 Years
Experience Level
Level
Entry Level
Education
Education
Associates


Combination Welder - Temp Resume

Objective : Combination Welder with exceptional knowledge of physical qualities and properties for a wide variety of metal types. Outstanding ability to follow oral and written directions. To be a part of a growing organization that is thriving on the latest technology, which gives a challenging career, in terms of accomplishing the responsibilities.

Skills : American Welding Society, Electrical, Rigging, Spray Painting, Brush And Roll Painting.

Description :

    1. Lays-out and fabricates metal structural parts, such as plates, bulkheads, and frames, and braces them in position within hull of the ship for riveting or welding.
    2. Lays out position of parts on metal, working from blueprints or templates and using scribe and hand tools.
    3. Locates and marks reference lines, such as center, buttock, and frame lines.
    4. Positions parts in ship and assists riggers. Align parts in relation to each other, using jacks, turnbuckles, clips, wedges, and mauls.
    5. Marks location of holes to be drilled and installs temporary fasteners to hold the part in place for welding or riveting.
    6. Installs packing, gaskets, liners, and structural accessories and members, such as doors, hatches, brackets, and clips.
    7. Prepare molds and templates for the fabrication of nonstandard parts.
    8. Tack weld clips and brackets in place prior to permanent welding.
Years of Experience
Experience
2-5 Years
Experience Level
Level
Junior
Education
Education
Diploma

Combination Welder - Apprentice Resume

Objective : To optimize the Technical training and experience and to improve by continuous learning of communication skills and responsibilities, which one can contribute to the progress of the organization. To Excel in work through dedication and total commitment.

Skills : MIG, TIG, Flux core, Stick, Sub-Arc, Aluminum, Stainless Steel and carbon welding processes

Description :

    1. Weld components in flat, vertical, or overhead positions.
    2. Operate safety equipment and use safe work habits.
    3. Layout, position, align, and secure parts and assemblies prior to assembly, using straightedges, combination squares, calipers, and rulers.
    4. Examine workpieces for defects and measure workpieces with straightedges or templates to ensure conformance with specifications.
    5. Recognize, set up, and operate hand and power tools common to the welding trade, such as shielded metal arc and gas metal arc welding equipment.
    6. Weld separately or in combination, using aluminum, stainless steel, cast iron, and other alloys Clamp, hold, tack-weld, heat-bend, grind or bolt component parts to obtain required configurations and positions for welding.
    7. Connect and turn regulator valves to activate and adjust gas flow and pressure.
Years of Experience
Experience
2-5 Years
Experience Level
Level
Junior
Education
Education
Certificate

Junior Combination Welder Resume

Objective : Seeking the challenging and exciting position of the welder with an industry leader that will give the opportunity to grow and maybe become their go-to guy in times of need. To be able to advance through the application of hard work and smart thinking. To ultimately advance to a prestigious management position with your company using these and other good work ethics.

Skills : Pipe welding, Combination welder, Structural welding, Communication

Description :

    1. Weld in flat, horizontal, vertical or overhead positions Repair broken or cracked parts, fill holes and increase the size of metal parts, using welding equipment.
    2. Mill and prep tubes using pneumatic tools Knowledge in hoisting and rigging and the fundamentals of scaffolding Review layouts, blueprints, diagrams or work orders in preparation for welding or cutting metal components.
    3. Preheat workpiece, using hand torch or heating furnace.
    4. Chip or grind off excess weld, slag, or spatter, using hand scraper or power chipper, portable grinder or arc-cutting equipment.
    5. Clean parts using a wire brush or portable grinder.
    6. Inspect finished workplace for conformance to specifications.
    7. Weld metal parts or components together, using brazing, gas or arc welding equipment.
Years of Experience
Experience
2-5 Years
Experience Level
Level
Junior
Education
Education
Bachelor Of Science

Combination Welder - Part Time Resume

Headline : Seeking a challenging job with sufficient scope for development and promotion up the ladder and which offer sufficient opportunity for positive contribution initiative. Seeking a challenging position in the organization where my skill talent, experience, and knowledge can be properly and dynamically utilized for the ultimate growth and development of the organization.

Skills : Welding, Communication, Patience, Customer Service

Description :

    1. Welded metal components together to fabricate and repair products, such as Locomotives, and other Train parts.
    2. Executed daily operations of MIG, and TIG welding, and rework welding.
    3. Welded metal parts together, using both gas welding and/or any combination of arc welding processes.
    4. Performed related tasks, such as thermal cutting and grinding.
    5. Was a key overseer of 2nd shift 8 locomotive build.
    6. Trained a co-worker on how to MIG weld until he successfully passed the level 1 entry weld test.
    7. Positioned and clamped together components of fabricated metal products.
Years of Experience
Experience
5-7 Years
Experience Level
Level
Executive
Education
Education
Diploma

Combination Welder/Field Worker Resume

Headline : To work in an environment that would utilize the skills to the maximum and can contribute to the vision of the organization. Aim to be associated with a progressive organization that gives me scope to update the knowledge and skills in accordance with the latest trends, and be a part of a team that works dynamically towards the growth of the organization and gains satisfaction thereof.

Skills : American Welding Society, Electrical, Rigging, Spray Painting, Brush And Roll Painting.

Description :

    1. Responsible for working on Turbines Responsible for cutting, grinding, pipe Stick and Tagging pipe from 2" to 60" X-ray standers, from the QA/QC.
    2. Monitor specified welding parameters during production welding Review welding procedures prior to welding to ensure all variables are met.
    3. Certified welder on duplex, stainless, and carbon steel.
    4. Inspect all fit up and preparation prior to welding.
    5. Reviewed closure weld packages.
    6. Worked in a fab shop, fabricating spools for different types of jobs the company had.
    7. Welded to code and procedures provided by the company.
    8. Certified in multiple welding processes.
Years of Experience
Experience
5-7 Years
Experience Level
Level
Executive
Education
Education
Diploma

Combination Welder - Contract Resume

Objective : Self-driven personality coupled with a problem-solving attitude. Posse's good Communication / interpersonal skills. Good Co-ordination and co-operation with the team. Adapt to learning and adaptable to diversified work environment. Good learner and good performer both in a team and independent environment.

Skills : Also Plumbing, Carpentry helper, Flooring, Mechanically inclined.

Description :

    1. Smoothed rough surfaces of metal components prior to welding.
    2. Cut straightened and developed metal components.
    3. Assessed completed welds for flaws and defects. Lifted and moved metal assemblies with crane operators.
    4. Informed supervisors of any unsafe project conditions.
    5. Run steam, water, and hydraulic lines Stick Mig and Tig weld Stainless, carbon, galvanized and Copper pipe and structural fit and fabricate.
    6. Developed weld procedures for vanadium piping - involved in all boiler piping and process.
    7. Review layouts, blueprints, diagrams, or work orders in preparation for welding or cutting metal components.
Years of Experience
Experience
2-5 Years
Experience Level
Level
Junior
Education
Education
High School Diploma

Combination Welder - Full Time Resume

Summary : Highly skilled and meticulous Combination Welder with a strong work ethic and excellent customer satisfaction record. Adept multitasker, able to handle a number of welding construction and repair assignments with full accuracy and efficiency. Extensive knowledge of welding and metal fabrication.

Skills : Industrial Machinery, Mechanics, Maintenance and Repair, Welders, Cutters, Solderers, and Brazers.

Description :

    1. Positioned and clamped metal components for welding.
    2. Conducted repair and maintenance operations for piping systems as necessary.
    3. Tested welding with air and water to find leakage points.
    4. Conducted Tig welding procedures on fiberglass, iron, plastic, and copper.
    5. Assessed and recommended welding process improvements.
    6. Conducted thermal grinding and cutting procedures on a regular basis.
    7. Tested and repaired damaged or broken weldings. Arranged and organized Tig welding equipment prior to work.
    8. Used gas and arc welding procedures to connect metal components.
Years of Experience
Experience
7-10 Years
Experience Level
Level
Senior
Education
Education
High School Diploma

Combination Welder/Welder Supervisor Resume

Headline : Combination Welder/Welder Supervisor proficient and skilled in technical specialties; to include but not limited to welding, maintenance, and pipe fitting. Recognized for the dedicated work ethic and productivity. Capable of doing work that requires concentration, a high degree of patience and attention to detail.

Skills : MIG, TIG, Stick Welding, Communication, Patience

Description :

    1. Have work permits ready for each job and fill out JSA's for every job performed and maintain work area clean for safe work area.
    2. Assembled and welded pipe from 1 to 20 inches in diameter using TIG and carbon rod welders.
    3. Guided and directed flames or electrodes on or across workpieces to straighten, bend, melt, or build up metal.
    4. Adjusted equipment controls to ensure proper welds.
    5. Aligned parts or workpieces to ensure proper assembly.
    6. Completed the required paperwork and Job Safety Analysis (JSA's) for each job.
    7. Welded all types of metals such as carbon, stainless steel, and aluminum.
Years of Experience
Experience
5-7 Years
Experience Level
Level
Executive
Education
Education
High School Diploma

Combination Welder Resume

Summary : Combination Welder with a strong ability to produce results within a team environment or independently, utilizing a take-charge attitude, self - motivation, and commitment. To obtain a high paying welding job that will challenge the welding ability and help learn and develop into the best welder that one can be and make the most money possible.

Skills : Pipe Welding, Electrical, Rigging, Spray Painting, Brush And Roll Painting.

Description :

    1. Weld carbon and stainless steel. Read and interpret basic drawings and weld symbols.
    2. Work to housekeeping procedure Inspection of work, identification of potential problems, initiation of corrective actions.
    3. Increase awareness of Quality procedures within the department. 
    4. Performs as a productive working team member that meets daily goals set by the supervisor.
    5. Continuously improve communications and flexibility within the team.
    6. Build pride in workmanship and quality through job training.
    7. Contribute to innovation/productivity improvements.
Years of Experience
Experience
7-10 Years
Experience Level
Level
Senior
Education
Education
Welding Certificate