Structural Welder Resume Samples

Description :

1. Provided superior craftsman repairs while maintaining existing systems and builds.
2. Assisted Sundt Construction and Intel Joint Venture with continuous expansion projects, which will total to 6 site projects at the anticipated finish date.
3. Fit various forms of steel and used wire and stick welding for stack supports.
4. Completed pipe rack and moment welds where needed on all structures.
5. Assist with rig ups on tanks, steel for piperacks, and equipment while obeying all safety policies and procedures.
6. Perform weld outs on guskets, stiffeners, and pipe supports.
7. Provided constant communication with production reports to Foreman and Superintendents to ensure quality and agreement on daily priorities.
8. Monitor daily operations at project sites, noting any challenges, new procedures, and techniques that may allow for overall maintenance or operation improvement.

Experience

5-7 Years

Level

Executive

Education

Diploma

Description :

1. Weld stainless steel and carbon steel and possibly other alloys.
2. Operate safety equipment and use safe work habits.
3. Layout, position, align, and secure parts and assemblies prior to assembly, using straightedges, combination squares, calipers, flange line up pins, wraparounds, center finders, and rulers.
4. Examine workpieces for defects and measure workpieces with straightedges or templates to ensure conformance with specifications.
5. Recognize, set up, and operate hand and power tools common to the welding trade.
6. Clamp, hold, tack-weld, heat-bend, grind or bolt component parts to obtain required configurations and positions for welding.
7. Develop fitting skills / Assist fitter with measurements and weld steel structures.

Experience

2-5 Years

Level

Junior

Education

Diploma

Description :

1. Position, align, fit, and weld parts to form complete units or subunits, following blueprints and layout specifications, and using jigs, welding torches, and hand tools.
2. Verify conformance of workpieces to specifications, using squares, rulers, and measuring tapes.
3. Lay out and examine metal stock or workpieces to be processed to ensure that specifications are met.
4. Align and fit parts according to specifications, using jacks, turnbuckles, wedges, drift pins, pry bars, and hammers.
5. Locate and mark workpiece bending and cutting lines, allowing for stock thickness, machine and welding shrinkage, and other component specifications.
6. Position or tighten braces, jacks, clamps, ropes, or bolt straps, or bolt parts in position for welding or riveting.
7. Study engineering drawings and blueprints to determine materials requirements and task sequences.

Experience

2-5 Years

Level

Executive

Education

Diploma

Description :

1. Operate safety equipment and use safe work habits.
2. Weld components in flat, vertical or overhead positions.
3. Clamp, hold, tack-weld, heat-bend, grind or bolt component parts to obtain required configurations and Positions for welding.
4. Detect faulty operation of equipment or defective materials and notify supervisors.
5. Chip or grind off excess weld, slag, or spatter, using hand scrapers or power chippers, portable grinders, or Arc-cutting equipment.
6. Prepare all material surfaces to be welded, ensuring that there is no loose or thick scale, slag, rust, moisture, Grease, or other foreign matter.
7. Remove rough spots from workpieces, using portable grinders, hand files, or scrapers.
8. Set up and use ladders and scaffolding as necessary to complete work.

Experience

7-10 Years

Level

Management

Education

General Industries

Description :

1. Read specifications or blueprints to determine the locations, quantities, or sizes of materials required.
2. Verify vertical and horizontal alignment of structural steel members, using plumb bobs, laser equipment, transits, or levels.
3. Connect columns, beams, and girders with bolts, following blueprints and instructions from supervisors.
4. Hoist steel beams, girders, and columns into place, using cranes, or signal hoisting equipment operators to lift and position structural-steel members.
5. Bolt aligned structural steel members in position for permanent riveting, bolting, or welding into place.
6. Ride on girders or other structural steel members to position them or use rope to guide them into position.
7. Fabricate metal parts, such as steel frames, columns, beams, or girders, according to blueprints or instructions from supervisors.
8. Pull, push, or pry structural steel members into approximate positions for bolting into place.

Experience

7-10 Years

Level

Management

Education

Vocational

Description :

1. Weld stainless steel and carbon steel and possibly other alloys.
2. Operate safety equipment and use safe work habits.
3. Lay out, position, align, and secure parts and assemblies prior to assembly, using straightedges, combination squares, calipers, flange line up pins, wrap arounds, center finders and rulers.
4. Examine work pieces for defects and measure work pieces with straightedges or templates to ensure conformance with specifications.
5. Recognize, set up, and operate hand and power tools common to the welding trade.
6. Clamp, hold, tack-weld, heat-bend, grind or bolt component parts to obtain required configurations and positions for welding.

Experience

2-5 Years

Level

Junior

Education

Welding

Description :

1. Operate safety equipment and use safe work habits.
2. Weld components in flat, vertical, or overhead positions.
3. Clamp, hold, tack-weld, heat-bend, grind or bolt component parts to obtain required configurations and positions for welding.
4. Examine work pieces for defects and measure work pieces with straightedges or templates to ensure conformance with specifications.
5. Lay out, position, align, and secure parts and assemblies prior to assembly, using straightedges, combination squares, calipers, and rulers.
6. Analyze engineering drawings, blueprints, specifications, sketches, work orders, and material safety data sheets to plan layout, assembly, and welding operations.
7. Operate manual or semi-automatic welding equipment to fuse metal segments, using processes such as gas tungsten arc, gas metal arc, flux-cored arc, plasma arc, shielded metal arc, resistance welding, and submerged arc welding.
8. Mark or tag material with proper job number, piece marks, and other identifying marks as required.

Experience

2-5 Years

Level

Junior

Education

High School Diploma

Description :

1. Weld structural steel in all positions.
2. Weld stainless steel and carbon steel and possibly other alloys.
3. Operate safety equipment and use safe work habits.
4. Lay out, position, align, and secure parts and assemblies prior to assembly, using straightedges, combination squares, calipers, flange line up pins, wrap arounds, center finders and rulers.
5. Examine work pieces for defects and measure work pieces with straightedges or templates to ensure conformance with specifications.
6. Recognize, set up, and operate hand and power tools common to the welding trade.
7. Clamp, hold, tack-weld, heat-bend, grind or bolt component parts to obtain required configurations and positions for welding.

Experience

10+ Years

Level

Senior

Education

Diploma

Description :

1. Performed daily tasks as issued by leadman on oil and gas industry cabinets.
2. Used acetylene torch and plasma arc cutter.
3. Used grinder for all clean up work as well as dye grinder, buffing pad and wire wheel.
4. Read blueprints of the units daily to fit up and air test properly without any leaks.
5. Used tape measure to see if material was correct size and to see if unit was square.
6. Did repair welds and cleanup in final stage of assembly line if not completed properly.
7. Maintained all tools and welding machines in my area until shift end Cleaned area at the end of day.

Experience

0-2 Years

Level

Entry Level

Education

Certificate

Description :

1. Operate semi-automatic welding equipment to fuse metal together.
2. Read blueprints and template to put small and large structural together by tack and full penetration welds.
3. Also lay out, position, align, and secure parts and assemblies prior to assembly using straight edges and clamps.
4. Used combination squares, calipers, tape measure and rulers.
5. Examine work pieces for defects and proper welds.
6. Construct and repair various metal parts by welding them together.
7. Welding components in flat, vertical and overhead positions Cutting large metal objects into pieces to be discarded.
8. Measuring work pieces with straightedges to ensure correct specifications.

Experience

5-7 Years

Level

Executive

Education

Building Technology

Description :

1. Cut and grinded parts using various power and hand tools.
2. Bolted, clamped, and tacked-weld parts to secure in position for welding.
3. Sets up equipment and weld parts, using fluxcore.
4. Layout, position, aligned, cut, assemble and fit metal components together in various body positions.
5. Position, align, and secure structural parts and related assemblies of pressure vessels, using plumb bobs, levels, wedge and turn buckles.
6. Bolt or arc-weld pressure vessel structures and parts together, using wrenches and welding equipment.
7. Straighten or reshape bent pressure vessel plates and structure parts, using hammer, jacks, and torch.
8. Bell, bead with power hammer, or weld pressure vessel tube ends to ensure leak proof joints.

Experience

5-7 Years

Level

Consultant

Education

Welding Technology

Description :

1. Repair and add welds to blue prints specifications.
2. Prep and layout to blueprints specifications.
3. operate main lifts and followed safety procedures.
4. Planned and laid out work from sketches, drawings, specifications and work orders.
5. Cut, ground and deburred frames and profiles.
6. painted and applied protective coatings to various parts.
7. Fulfilled output requirements while consistently reducing scrap levels.

Experience

7-10 Years

Level

Management

Education

Diploma