Die Setter Resume Samples

The main job task of a Die Setter is to set up forging machines, forging rolls, follow blueprints, and data-chart specifications. The other duties are mentioned on the Die Setter Resume as follows – measuring various instruments, aligning and bolting dies, installing and gripping of dies, setting and bolting rolls, starting machines and inspecting works, forging press setter-up, coining presses, inspecting work to verify conformance of die setup matches with specifications, installing impression and performing all other tasks as associated with this job description.

Some of the crucial skills needed for this role are – the ability to operate complex machinery, operation and controlling skills, the ability to monitor and make appropriate improvements, social perceptiveness and quality control analysis skills. Most of the eligible resumes make a mention of a technical certificate or a high school diploma with a formal education like a high school diploma or a GED.

Die Setter Resume example

Die Setter Resume

Summary : CNC Swiss style, with bar loaders, Machine set up, in industries including Industrial and Commercial Machinery and Computer Equipment, Transportation Equipment Most recently.

Skills : Public Speaking, Inventory Management, Word.

Description :

    1. Examined completed workpieces for defects. Set-up and operate a variety of manufacturing equipment.
    2. Verified conformance to specifications, using micrometers, gauges, calipers, templates, and rulers.
    3. Set-up presses to run parts at customers' specifications. operate a forklift, operate presses, read blueprints.
    4. Utilized precision measuring and set-up equipment Read and understand a variety of blueprints.
    5. Ran presses for hand parts or steel automatic Set up presses and set in dyes to run.
    6. Set up for quality checks for production Forklift operation for parts and moving steel rolls for production.
    7. Changed molds on presses so that they are within their parameters and ensured that, upon startup, that they do not break.
Years of Experience
Experience
10+ Years
Experience Level
Level
Senior
Education
Education
Diploma


Die Setter/Representative Resume

Summary : Full-time employment that allows for growth and advancement in a place where there are teamwork and mutual respect among employees and employers. Able to handle a high volume of work.

Skills : Auto maintenance, Steering gear rebuilding.

Description :

    1. Responsible for all mold changes done per scheduled and emergency mold changes.
    2. Set-up of all molds and related functions such as watering of the mold, knockout, hot runner set-up, hydraulics, pneumatics, etc.
    3. Set parameters of the molding press to process verification.
    4. Complied with all internal and OSHA procedures. Set up and operated lubrication equipment.
    5. Set up and performed hand and automatic assembly operations on components, assemblies, and sub-assemblies.
    6. Assembled components with hand and power tools.
    7. Performed and reviewed Statistical Process Control (SPC), including data collection, charts, and graphs.
Years of Experience
Experience
7-10 Years
Experience Level
Level
Management
Education
Education
Injection Molding


Die Setter II Resume

Headline : Ability Summary Able to handle a high volume of work in a fast paced environment with minimal supervision. Excellent learning skills and able to remember job task well.

Skills : Mechanical, Multiple forklift experience.

Description :

    1. Eventually ended up training workers and checking the quality of parts to spec on the fixture.
    2. Full-time company employees became a die-setter.
    3. Trained started with learning how to use the crane and the process of the mold changes.
    4. Molded changes were being performed would be making sure that the material was ready and not running out.
    5. Visually inspected the machines for problems. Die-setters were mainly in charge of what called film presses and rotary presses.
    6. Processed technicians and maintenance personnel would be called upon for more complicated problems when needed.
    7. Removed Dies that are done being used quickly and safely Set new Die quickly and safely.
Years of Experience
Experience
5-7 Years
Experience Level
Level
Executive
Education
Education
Automotive Service Certificate

Die Setter II Resume

Headline : To apply the knowledge and advanced skills regarding new technologies, procedures, and policies, while striving to continuously improve operations, acquiring more knowledge.

Skills : Microsoft Office, Technical Skills.

Description :

    1. Troubleshoot machines for proper installation/removal of molds after each changeover.
    2. Provided proper documentation for tool work orders, as well as establishing strong communication between each department.
    3. Set molds in accordance with processing set up a sheet with little or no issues.
    4. Efficient with the use of DME and EWIKON controllers.
    5. Accomplished the molding change over in a timely manner, reducing non-value added downtime.
    6. Completed a shutdown of press for mold change over and press restart per RayConnects die setting procedures.
    7. Continuous improvement efforts as they relate to quality, safety, 5S, environmental, and production efficiency.
Years of Experience
Experience
5-7 Years
Experience Level
Level
Executive
Education
Education
Electrical Technology

Die Setter/Executive Resume

Headline : Working in manufacturing for the line of a cold offset web press to working up to head press operator. Eventually working up to the production manager, having people to manage.

Skills : Welding, Skilled In Base Fitting.

Description :

    1. Mounted attachments or tools onto production equipment. Mount materials or workpieces onto production equipment.
    2. Selected production equipment according to product specifications.
    3. Operated cranes, hoists, or other moving or lifting equipment.
    4. Monitored equipment operation to ensure that products are not flawed.
    5. Measured dimensions of completed products or workpieces to verify conformance to specifications.
    6. Set molds in presses, hook up water lines, hydraulic lines, auxiliary equipment, Eoa, start to upcycle in programs, and restart after color changes.
    7. Changed tools out, set up auxiliary equipment, organize tooling send tools out for service, receive tools from servicing.
Years of Experience
Experience
5-7 Years
Experience Level
Level
Executive
Education
Education
Diploma

Die Setter/Analyst Resume

Headline : Looking for a position in the area of manufacturing. Past experience which covers a wide range of responsibilities in machine set-up and troubleshooting.

Skills : Mig welding, Forklift operator, Plasma cutter.

Description :

    1. Helped people with common issues throughout the day.
    2. Checked to see if any jobs are done with their run. Measure the feed length that the steel needs to be fed.
    3. Removed tooling by crane or by hi-low Experience with hi-lows for pound capacity.
    4. Removed all scarp from bolster bed to insure the tool is sitting flat on a bolster to prevent quality issues and HMS issues.
    5. Progressed dies setting, as well as transfer, die setting with HMS transfer system.
    6. Pre-staged next die in the proper location at the press.
    7. Loaded coils on coil reel Steel alignments so the die will run and run good parts.
Years of Experience
Experience
5-7 Years
Experience Level
Level
Executive
Education
Education
Hsd In Gen.

Die Setter III Resume

Summary : Working experience in a manufacturing environment. Held various positions as a maintenance mechanic, machine operator, die setter and assistant supervisor where have trained employees.

Skills : Die setter progressive, Transferable, Single hit/ automatic.

Description :

    1. Set up, troubleshoot various sizes of powder metal presses.
    2. Preventive maintenance, and areas of improvement on presses and equipment.
    3. Set up reduction, improvement of quality of parts. Skills Used Troubleshooting skills, and mechanical aptitude.
    4. Suggestions on improvements in transfer equipment, and automation.
    5. Opened communication, and continued improvement.
    6. Equipment is operating correctly, and the fixator has maintenance to take a look at the problem.
    7. Checked lines every hour to make sure the products stay in specs of the company numbers.
Years of Experience
Experience
10+ Years
Experience Level
Level
Senior
Education
Education
General Studies

Lead Die setter Resume

Summary : Recently retiree with manufacturing background, production and fabrication experience with excellent interpersonal skills and a flexible schedule. Interpretation of blueprints and drawings.

Skills : Welding, Electrical, Mechanic.

Description :

    1. Ran presses, drive a forklift, measure quality specification using a dial indicator, chamfer gauge, micrometer, and calipers.
    2. Set up presses and ensure quality control of parts in a timely manner.
    3. Helped with the stability of the working pace among the group.
    4. Divided the workload evenly in the depart to ensure better quality.
    5. Troubleshot and problem-solving on a daily basis.
    6. Learned on the job training as required to better and those around for faster and safer production goals.
    7. Able to work with a team and as an individual.
Years of Experience
Experience
7-10 Years
Experience Level
Level
Management
Education
Education
Diploma

Associate Die Setter Resume

Headline : Skills Certified forklift operator,strategic thinker, initiative to work independently, metal working ability, mathematical reasoning, safty oriented, superior communication skills.

Skills : Forklift Operator, Saw Operator, Die Setter.

Description :

    1. Installed dies into plastic mold injection press with ton ceiling crane.
    2. Interpreted blueprints, drawings, and written and verbal work orders.
    3. Repaired, modified, and maintained equipment. Set up work stations and changed over injection molds.
    4. Suggested mold and machine specific repairs and improvements to increase the production of high-quality parts.
    5. Monitored and maintained machine and water parameters.
    6. Ran plastic injection molding machines and peripheral equipment.
    7. Operated ultrasonic welding equipment, weight scales, and forklifts.
Years of Experience
Experience
5-7 Years
Experience Level
Level
Consultant
Education
Education
Associate Of Arts

Sr. Die Setter Resume

Summary : Highly motivated, responsible, and dedicated individual with supervisory experience in press operations and quality control.

Skills : Warehouse, Stocking experience.

Description :

    1. Manufacture parts for CAT, Case, and John Deere, as well as many others.
    2. Built and tears down die sets for over diverse machine and industrial equipment parts.
    3. Checked products for quality and adjusts machines accordingly. Follows blueprint instructions to fulfill work orders to required specifications.
    4. Inspected work to verify the conformance of die set-up to specifications.
    5. Loaded die sets into presses ranging in size. Fabricates components related to press operation.
    6. Worked safely and productively to achieve quality pipe and customer satisfaction.
    7. Changed dies when necessary and do changeovers when pipe size changes.
Years of Experience
Experience
10+ Years
Experience Level
Level
Senior
Education
Education
Diploma

Die Setter Resume

Headline : To obtain a position that will enable to use strong organizational skills, educational background, and ability to work well with people.

Skills : Forklift Driver, OH Crane Operator, Off Road Truck Driver.

Description :

    1. Properly inserted molds in plastic extrusion machines.
    2. Connected hydraulic lines and test for pressure. Clean oil/hydraulic fluid in the event of spills.
    3. Ran QC samples while visually inspecting for cracks or wear on the molds.
    4. Maintained PVC and Styrene pellets in hoppers.
    5. Prepared daily reports containing details of work performed.
    6. Set up and operated Gasbarre, Cincinnati, and Stoke Machines-Molding presses-Ton Press.
    7. Set up, adjust, and troubleshoot molding presses.
Years of Experience
Experience
5-7 Years
Experience Level
Level
Executive
Education
Education
History