Electrical Systems Engineer Resume Samples

The job description of an Electrical Systems Engineer includes researching, designing, developing, testing, and supervising the installation and manufacturing of electrical equipment, systems, components for commercial, industrial, scientific, and military use. Other core duties are listed on the Electrical Systems Engineer Resume as – directing and coordinating the installation, support, documentation, maintenance, and testing activities and ensuring compliance with codes, specifications, and customer requirements; compiling data and writing reports, performing detailed calculations to the computer and establish construction or installation standards and specifications, and supervising the project team members.

The most sought-after skills for the post include the following – knowledge of applicable codes relating to electrical and electronics engineering, proficiency in design and calculation software, and experience in the relevant field. A bachelor’s degree in electrical engineering degree along with a license to work as a professional engineer are certain standard pre-requirements.

Electrical Systems Engineer Resume example

Electrical Systems Engineer Resume

Objective : Highly motivated and achievement oriented professional seeking an electrical engineering position, development and design activities related to power systems, control systems and communication.

Skills : Simulink, Orcad PCB, Labview, AutoCAD, Matlab, C++, Pspice, Assembly, And Microsoft Office.

Description :

    1. Designed, developed, tested, and implemented electrical systems required for navigation and communication between aircraft and ground services.
    2. Responsible for Electrical designing on numerous Head of State aircraft including lighting, entertainment systems, cabin power systems and avionics system applications.
    3. Worked on system integration to the criteria of design proposals, specifications, and requirements.
    4. Developed ground and flight test plans required for FAA and EASA certification.
    5. Performed Ground and Flight Testing.
    6. Experienced with A320-200, BBJ 737, and 787 Aircraft.
    7. Helped developing an engineering training program, and assist with designing the content as a subject matter expert.
Years of Experience
Experience
0-2 Years
Experience Level
Level
Entry Level
Education
Education
GED


Electrical Systems Engineer Resume

Objective : Hands-on experience in IC, MEMS, and semiconductor processing. Extensive understanding of FinFET/3D devices and fabrication, with simulation in Synopsys Sentaurus. Multidisciplinary experience in developing 300mm semiconductor manufacturing equipment, from proof-of-concept to production.

Skills : Semiconductor Device Physics, Semiconductor Fabrication, Design Of Experiments, Synopsys Sentaurus, Reactive Ion Etching, Vacuum Technology, Plasma, Pressure Control,Temperature Control, JMP, R, SIMCA-P+, MATLAB, C/C++, Java, SQL, SPICE, 8D.

Description :

    1. Led a six-person team in the design and development of electrical hardware for post-etch CxFy polymer removal application, coordinating schematics creation, testing, and preparation for pilot manufacturing.
    2. Created throughput model for 3 different tool platforms, identifying software and hardware bottlenecks and collaborating with multiple engineering groups on optimization.
    3. As a result, platform throughput increased by 15%.
    4. Received Excellence in Technical Support Award for this work.
    5. In-fab support of etch tools at customer sites in Taiwan and Japan, including first-in-fab installation.
    6. Trained customer engineers on-site in tool usage, troubleshooted equipment issues, and provided technical documentation.
    7. Designed and implemented etching endpoint algorithm software using optical endpoint spectroscopy, resulting in patent pending.
Years of Experience
Experience
2-5 Years
Experience Level
Level
Executive
Education
Education
Master Of Science


Electrical Systems Engineer Resume

Objective : Electrical Systems Engineer with 4 years of experience in Coordinating with members of the Onto team to ensure requirements are understood and electrical designs are smoothly integrated into broader systems and products, and also Supporting certification of designs to compliance standards like CE, UL.

Skills : Electrical, Field Service, Field Service, Troubleshooting, Maintenance, Maintenance Management, Maintenance Management.

Description :

    1. Served as co-lead Human Factors Engineer for locomotive operator man-machine interface and GUI design and for all crew systems interfaces and safety issues.
    2. Responsible for crew systems usability assessment planning, test execution, and results analysis.
    3. Responsible for system requirements definition and design, including development/authorship of system functional specifications, design specifications, purchase specifications, failure mode effects analyses (FMEAs and FMECAs), onboard system software/hardware architecture concept definition and design documents, locomotive engineering test plans, engineering test execution, field modification instructions, and customer/vendor technical coordination for numerous electronic onboard locomotive systems.
    4. Developed, reviewed, and adjudicated engineering change proposals (ECPs).
    5. Performed requirements and regulatory standards compliance tests.
    6. Supported diagnosis of equipment failures via fault tree analysis and Six Sigma techniques.
    7. Served as Lead Electrical Systems Engineer for numerous on-board locomotive electronic systems including Global Positioning System (GPS), Integrated and stand-alone event (crash) recorders, 450 MHz Spread Spectrum Yard Radio, Integrated PCMCIA Data Access System, Integrated Communications Antenna System, UHF and VHF Voice Radio systems, crew cab speaker systems, crew cab intercom systems, cab signal computer, 2-Way End-of-Train System, crew cab display devices, audio alarm panels, integrated locomotive cellular telephone system, and crew cab man-machine interface design.
Years of Experience
Experience
2-5 Years
Experience Level
Level
Executive
Education
Education
GED

Electrical Systems Engineer Resume

Headline : As an Electrical Systems Engineer, responsible for Implementing and troubleshoot designs via hands-on integration and test activity, Generating board layout files, Gerbers, schematics, architecture drawings, and written procedures in support of the product release.

Skills : NEC, SmartSketch, SmartPlant, Asset Suite, Microsoft Software.

Description :

    1. Provided designs and recommendations to better the plant's electrical systems.
    2. Served as System Owner of the plant electrical distribution system.
    3. Recommended and developed projects to improve the station's systems.
    4. Refined and improved system designs and drawings.
    5. Maintained plant ETAP model and run applicable simulations.
    6. Assisted in development of projects for North Platte Hydro and Canaday Stations Work directly with plant operations to assist in day-to-day operation.
    7. Developed capital projects and serve as a project manager.
Years of Experience
Experience
5-7 Years
Experience Level
Level
Executive
Education
Education
B.S. In Electrical Engineering

Electrical Systems Engineer Resume

Headline : Providing exceptional service, in an innovative and competitive environment where I am allowed to use my experience in engineering for the best needs of the company.

Skills : System Engineer, MS office, Communication Skills.

Description :

    1. Assisted Senior Engineers in the preparation, update, and review of Safety of Flight Statements, Qualification Test Procedures, Desktop Validations (Troubleshooting procedures), and detail drawings for avionics and electrical power generation and distribution systems.
    2. Assisted in the preparation, update, and review of Interface Control Documents Schematics and Wiring Diagrams of the L85 engines, antennas, cockpit push buttons, and external, internal, and emergency lights.
    3. Assisted Senior Engineers and certification agency representatives in the development and preparation of over 30 certification plans and test procedures.
    4. Authored over 15 Learjet to supplier correspondence to communicate technical data for the following: Astronics, Esterline Korry, Emteq, and Sensor Systems.
    5. Designed Electronic Circuit Breaker Configuration Module for the Astronics Electric Power Distribution System (EPDS), incorporating more than 25 optional equipment configurations.
    6. Designed over 30 Wire Harness Assembly drawings for the System Level Test Rig using Adobe Reader to add or modify different symbolization, add or delete connections, and add or delete wires as needed by the wiring diagrams and Interface Control Documents of the Learjet 85.
    7. Designed, were then sent to Bombardier (Canada), and revised in CATIA to make the changes from the assembly drawings I created.
Years of Experience
Experience
5-7 Years
Experience Level
Level
Executive
Education
Education
MS

Electrical Systems Engineer Resume

Objective : Ensuring the logical and systematic conversion of product requirements into total systems solutions that acknowledge technical, schedule, and cost constraints, Performing functional analysis, timeline analysis, detailed trade studies, requirements allocation, and interface definition studies to translate customer requirements into hardware and software specifications.

Skills : Robots, Undersea Vehicles, System Engineer.

Description :

    1. Responsible for the electrical project management, installation, and upgrade of plastic film packaging production lines.
    2. Managed electrical project budget.
    3. Supervised and approved custom electrical designs of purchased machinery from vendors.
    4. Created communication drivers for automation in C and BASIC computer languages.
    5. Served as the primary technical resource for plant electrical systems.
    6. Managed product reliability via six-sigma design methods for the full product life cycle.
    7. Taught six-sigma classes to engineering staff and management and conducted six sigma cross-enterprise and multi-enterprise process improvement programs.
Years of Experience
Experience
2-5 Years
Experience Level
Level
Executive
Education
Education
B.S. In Computer Engineering

Electrical Systems Engineer Resume

Headline : A proactive, dedicated, and progressive Electrical Engineer seeking a relevant position within your organization. Relevant experience in solar panel design and computer logistics. Proven ability to coordinate and collaborate with project teams and perform computer software maintenance, all while ensuring goals are met ahead of schedule.

Skills : Diagnose, Repair, Design, Solar Panel, Website Design, Tutor, Research.

Description :

    1. Led trade-off analysis of features to meet cost, weight, and energy management targets.
    2. Ensured vehicle benchmarking data was fully considered for electrical system definition.
    3. Ensured electrical system quality history issues and FMEA were addressed in the new design.
    4. Led development of vehicle-specific electrical schematics.
    5. Led technical design reviews at engineering milestones.
    6. Led functional integration of all electrical features on vehicle programs.
    7. Led compatibility reviews to verify all module and wiring interfaces.
Years of Experience
Experience
5-7 Years
Experience Level
Level
Executive
Education
Education
BS In Electrical Engineering

Electrical Systems Engineer Resume

Summary : Electrical Systems Engineer with extensive experience in design and support of a diverse collection of machinery, which includes farm implements, automobiles, mining equipment, and commercial graphic arts equipment. Exceptionally strong aptitude for finding simple solutions to complex problems. 15 years' experience as a system engineer having comprehensive capabilities.

Skills : Patent Bar, Communication Skills, Multitasking.

Description :

    1. Designed and manufactured of a control system for off-highway mobile equipment Accomplishments.
    2. Wrote software using C++ and ladder logic as well as HMI (Wonderware).
    3. Designed and procured harnesses.
    4. Conducted field follow.
    5. Designed and developed a pressure control system using sensors and vacuum hardware for low-pressure front-end etching application.
    6. Collaborated with vendors on electrical hardware modification.
    7. Volunteered for a GDC Charity Golf Tournament as a member of the steering committee.
Years of Experience
Experience
7-10 Years
Experience Level
Level
Management
Education
Education
MS

Electrical Systems Engineer Resume

Summary : Hardworking, organized, Electrical Systems Engineer professional with a proven background delivering sensible business technology solutions on time and under budget while working as a team member or team leader.

Skills : System Engineer, Electrical Skills.

Description :

    1. Tracked the Global Maximum Power Point of PV Arrays under Partial Shading Conditions Developed a PV system model in Simulink that combines 4 PV panels connected in series, an MPPT algorithm under partial shading, and a DC-DC converter (Buck and Boost Converter).
    2. Served as a technical expert in electrical equipment, systems, and processes.
    3. Performed and directed studies to evaluate the effects of modifications, deterioration, deletions, and additions to major systems and equipment.
    4. Assisted production units in the resolution of equipment and system problems as requested.
    5. Ensured that performance gaps and other problems at a particular location are investigated at other locations having similar equipment and systems.
    6. Ensured fleet or fossil systemwide replication of solutions and standardization as appropriate.
    7. Served as a project engineer for assigned projects, including large, multi-discipline, and more complex projects.
                Years of Experience
                Experience
                7-10 Years
                Experience Level
                Level
                Management
                Education
                Education
                BS

                Electrical Systems Engineer Resume

                Headline : Electrical Systems Engineer with 5 years of experience in Contributing to defining the direction for new products, processes, standards, or operational plans based on business strategy with a significant impact on workgroup results.

                Skills : Organizational Skills, System Engineer.

                Description :

                  1. Performed or directed multi-discipline engineering work to optimize the performance of plant equipment, apparatus, and facilities for electrical systems at all TVA fossil plants.
                  2. Provided administrative and technical supervision to engineers and support personnel.
                  3. Planned, designed, and developed electrical components and systems of existing and new products.
                  4. Designed activities include analog and digital design, PC board design and layout, sensor and support assemblies, power distribution, motion control devices, and system cabling.
                  5. Performed reliability testing and generates procedures for testing boards and related assemblies.
                  6. Coordinated engineering change order deliverables and completes per company procedures.
                  7. Coordinated material procurement for products in development, including internal and revenue tools.
                            Years of Experience
                            Experience
                            5-7 Years
                            Experience Level
                            Level
                            Executive
                            Education
                            Education
                            MS