Electrician Resume Samples

Description :

1. Started agitators, shakers, conveyor, pumps, and centrifuge machines, turned valves and moved controls to admit, drain, filter, mix, and transfer materials.
2. Set and adjusted machine controls to regulate conditions, such as material flow, temperature, and pressure, according to specified operating procedures.
3. Dumped, poured, and loaded specified amounts of refined and unrefined materials into equipment and containers for further processing and storage.
4. Measured and weighed materials to be refined, mixed, transferred, stored, and otherwise processed.
5. Inspected machines and equipment for hazards, operating efficiency, mechanical malfunctions, wear, and leaks.
6. Maintained a log of instrument readings, test results, and shift production.
7. Removed full bagged and containers from discharge outlets and replaced them with empty ones.
8. Tested samples to determine viscosity, acidity, specific gravity, and degree of concentration, using test equipment, such as viscometer, ph meter, and hydrometer.
9. Cleaned tanks, screens, inflow pipes, and other processing equipment, using hoses, brushed, scrappers, and chemical solutions.

Experience

10+ Years

Level

Consultant

Education

Associate Of Science

Description :

1. Performed electrical utility services for industrial based and new building projects.
2. Installed safety systems, including emergency lighting, uninterruptible power systems, and battery systems.
3. Examined and created solutions for high voltage electrical system issues.
4. Consistently worked to code on all projects, utilizing drawings and manuals.
5. Traced and diagnosed malfunctions with hand tools and test equipment such as multimeters.
6. Worked extensively on three-phase, 277/480 volt power distribution systems.
7. Directed electricians on installation, maintenance, and repair on electrical wiring and equipment.
8. Installed safety systems, including emergency lighting, uninterruptible power systems, and battery systems.
9. Tested the entire electrical assembly for performance levels and safety concerns.
10. Performed electrical utility services for industrial based and new building projects.

Experience

7-10 Years

Level

Senior

Education

High School Diploma

Description :

1. Assembled, installed, tested, and maintained electrical or electronic wiring, equipment, appliances, and fixtures.
2. Diagnosed malfunctioning systems, to locate the cause of a breakdown and correct the problem.
3. Inspected electrical systems, equipment, and components to identify hazards, defects, and the need for adjustment or repair, to ensure compliance with codes.
4. Installed ground leads and connected power cables to equipment, such as motors.
5. Placed conduit (pipes or tubing) inside designated partitions, walls, or other concealed areas, and pull insulated wires or cables through the conduit to complete circuits between boxes.
6. Planned layout and installation of electrical wiring, equipment, and fixtures, based on job specifications and local codes.
7. Prepared sketches or follow blueprints to determine the location of wiring and equipment and to ensure conformance to building and safety codes.
8. Tested electrical systems and continuity of circuits in electrical wiring, equipment, and fixtures, using testing devices such as ohmmeters, voltmeters, and oscilloscopes, to ensure compatibility and safety of the system.
9. Performed physically demanding tasks, such as digging trenches to lay conduit and moving and lifting heavy objects.
10. Worked from ladders, scaffolds, and roofs to install, maintain or repair electrical wiring, equipment, and fixtures.

Experience

7-10 Years

Level

Senior

Education

High School

Description :

1. Worked with various types of cableways, conduits and other electrical raceways.
2. Demonstrated expertise in the use of cable reels, stripping tools, voltage detectors, crimping tools and wire and cable cutters.
3. Completed tear-down of existing structures and prepared for new construction.
4. Dug trenches, backfilled holes and compacted earth to prepare for new construction.
5. Consistently assumed additional responsibilities and worked extended hours to meet project deadlines.
6. Operated equipment such as boom lift, aerial lifts, forklift, bucket truck, telescopic handler.
7. Attached electrical and telephone wiring to properly connect components.
8. Completed logs and reports according to established policies and procedures.
9. Unpacked and assembled all new merchandise using a variety of power tools.

Experience

2-5 Years

Level

Junior

Education

Certificate

Description :

1. Measuring, cut, and bending wire and conduit, using measuring instruments and hand tools.
2. Constructing controllers and panels, using power drills, drill presses, taps, saws, and punches.
3. Maintaining tools, vehicles, and equipment and keep parts and supplies in order.
4. Transporting tools, materials, equipment, and supplies to work site by hand, hand truck, or heavy, motorized truck.
5. Threading conduit ends, connecting couplings, and fabricating and securing conduit support brackets.
6. Disassembling defective electrical equipment, replacing defective or worn parts, and reassembling equipment.
7. Performing semi-skilled and unskilled laboring duties related to the installation, maintenance, and repair of a wide variety of electrical systems and equipment.
8. Raising, lowering, or positioning equipment, tools, and materials using the hoist, handline, or block and tackle.
9. Operating cutting torches and welding equipment, while working with conduit and metal components to construct devices associated with electrical functions.

Experience

7-10 Years

Level

Senior

Education

Diploma

Description :

1. Installing and maintaining electrical equipment of extreme variety and complexity, to include high voltage electrical substations, medium voltage breakers, variable frequency drives controlled by PLC's.
2. Installing conduit and wiring for transformers, electrical panels, motors and controls as required for industrial production.
3. Performing substation switching when required for maintenance and equipment isolation and also for emergency situations to restore power.
4. Performing switching in outside distribution systems for maintenance of incoming lines by the national grid.
5. Inspecting electrical systems, equipment, and components to identify hazards, defects, and the need for adjustment or repair, and to ensure compliance with codes.
6. Testing electrical systems and continuity of circuits in electrical wiring, equipment, and fixtures, using testing devices such as ohmmeters, voltmeters, and oscilloscopes, to ensure compatibility and safety of the system.
7. Troubleshooting and repairing all types of mechanical and electrical breakdowns.

Experience

10+ Years

Level

Consultant

Education

Electrical Apprenticeship

Description :

1. Responsible for industrial electrical maintenance including annual equipment shut-down to check breakers and electrical gear, torque, and clean power centers and distribution panels.
2. Monitoring boiler pressure gauges to be sure they are operating within correct parameters.
3. Managing projects by coordinating and negotiating with outside vendors for job completion including obtaining quotes and requesting PO's for job completion, projects included maintenance of on-site transportation, IT, audio-visual equipment, and electrical jobs.
4. Inspecting lighting conditions within the facilities and replacing ballasts and lamps as needed.
5. Performing set-up of conference rooms with any needed audio/visual equipment.
6. Interacting with and supervising subcontractors that are on-site to perform various jobs.
7. Ensuring client satisfaction by staying in contact with client throughout job completion.
8. Assisting other crews including general maintenance, plumbers, and locksmith.

Experience

10+ Years

Level

Consultant

Education

High School

Description :

1. Repaired or replace wiring, equipment, or fixtures, using hand tools or power tools.
2. Tested electrical systems or continuity of circuits in electrical wiring, equipment, or fixtures, using testing devices, such as ohmmeters, voltmeters, or oscilloscopes, to ensure compatibility and safety of the system.
3. Planned the layout and installation of electrical wiring, equipment, or fixtures, based on job specifications and local codes.
4. Inspected electrical systems, equipment, or components to identify hazards, defects, or the need for adjustment or repair, and to ensure compliance with codes.
5. Installed ground leads and connected power cables to equipment, such as motors.
6. Worked from ladders, scaffolds, or roofs to install, maintain, or repair electrical wiring, equipment, or fixtures.
7. Placed conduit, pipes, or tubing, inside designated partitions, walls, or other concealed areas, and pull insulated wires or cables through the conduit to complete circuits between boxes.
8. Dismantled machines and removed parts for repair, using hand tools, chain falls, jacks, cranes, or hoists.

Experience

5-7 Years

Level

Executive

Education

Diploma

Description :

1. Responsibilities included run conduit, wiring, hook-up disconnects, switches, push buttons, circuit panels, breakers, suppressers, transformers troubleshoot electrical or environmental and related equipment for naval ships and submarines.
2. Installed, modified, repaired, replaced, adjusted and overhauled complex and/or electrical or environmental systems, components, and accessories, with intricate wiring armament, landing gear, antiskid, ignition, stall warning, power distribution, engine drive alternator and fuel indicating systems.
3. Utilized safety practices and procedures and comply with security regulations, directives, and policies.
4. Ensured tools are properly marked, calibrated (if necessary), and are secured when the area is unattended.
5. Operated and maintained power and lighting circuits, electrical fixtures, and switchboards.
6. Stood to watch on generators, switchboards, control equipment, and electrical equipment.
7. Responsible for the proper administration, operation, and maintenance of nuclear primary and secondary plant systems.
8. Installed fire alarm, security, door access, lighting, and various other systems.

Experience

2-5 Years

Level

Junior

Education

Technical Degree

Description :

1. Installed, tested and modified circuit breakers, controls, fuses, lights and motors.
2. Interpreted drawings, wiring diagrams, flow charts and written descriptions of the project requirements.
3. Worked with various types of cableways, conduits and other electrical raceways.
4. Consulted with the supervisor electrician regarding the likely risks associated with the assigned job.
5. Demonstrated expertise in the use of cable reels, stripping tools, voltage detectors, crimping tools and wire and cable cutters.
6. Inspected or tested damaged machine parts, and mark defective areas or advise supervisors of repair needs.
7. Start3e machines and observed mechanical operation to determine efficiency and to detect problems.
8. Repaired control panels and acted as company representative on the phone and in the field.
9. Used a variety of skills in the repair and installation of wiring for electrical motors, breakers, and reducers.

Experience

10+ Years

Level

Consultant

Education

High School