Electronics Design Engineer Resume Samples

An Electronics Design Engineer is responsible for developing, designing, and testing the manufacturing of electrical equipment. A well-drafted Electronics Design Engineer Resume indicates the following duties – designing the electrical systems for aircraft, and automobiles; planning and developing applications and modifications for the electronic properties; inspecting electronic systems, and instruments and equipment, assessing systems and recommending modifications to the design and repair the equipment; developing maintenance and procedures for testing the electronic equipment and components; and investigating complaints and recommending the best solutions.

Those seeking this job role must mention on the resume the following skills – high level of concentration and analytical skills; the ability to apply academic knowledge to new tasks, a good understanding of natural laws, the ability to apply principles of calculus and other advanced topics in math; and speaking skills. A relevant engineering degree is commonplace among job applicants.

Electronics Design Engineer Resume example

Electronics Design Engineer Resume

Headline : Seeking a challenging Electronics Design Engineer position, utilizing controls engineering software and project control systems. Experience with the emphasis on automation and Control engineering applications. Areas of experience: Food and Beverage industrial automation and exposure for CIP process & Monitoring Several years of experience in Controls and Product design, Development, Troubleshoot, Maintenance support.

Skills : PCB Design, Project Management, Schematic Design, Microcontroller Based Circuit Design, SMT Soldering, Engineering Design, Diptrace PCB And Schematics, Electronics Prototype Fabrication, Embedded C Programming, Altium Designer, Microchip MPLAB IDE.

Description :

    1. Created all the Electronic Schematics and Designs for various clients.
    2. Designed are done in-house by our design team and are used in various fields from medical to industrial equipment.
    3. Designed for heavy-duty use and long-life service.
    4. Dealt directly with vendors and other engineers in our group, including electrical and mechanical engineers to develop a design for the prototype Dealt directly with clients to obtain product working specifications and final product fit and function, including setting up training videos.
    5. Maintained existing product lines for both military and consumer grade products, including setting up automated testing procedures for final manufacturing.
    6. Embedded C development systems.
    7. Familiared with FPGA's and VHDL programming.
Years of Experience
Experience
5-7 Years
Experience Level
Level
Executive
Education
Education
GED


Electronics Design Engineer Resume

Objective : A self-motivated, postgraduate Electronics Design Engineer with a vast experience in multiple areas including designing electronics projects, instrumentation, research and development, problem-solving skills, technical writing and engineering management. Looking for opportunities within the Engineering disciplines to enhance technical knowledge and further career development.

Skills : Wattics Energy Dashboard, Memristor Toolbox; Simulink;.

Description :

    1. Drawn and designed circuit board layout, and schematics designs using Eagle/AutoCADComponent soldering on Veroboard and PCB.
    2. Fault found using electronic drawings on PCB).
    3. Addressed customer complaints.
    4. Provided recommendations and consumer feedback reports based on insights.
    5. Composed technical reports.
    6. Summarized engineering data and present data to the team and management.
    7. Utilized LabVIEW to design Graphical User Interface (GUI).
Years of Experience
Experience
2-5 Years
Experience Level
Level
Executive
Education
Education
GED


Electronics Design Engineer Resume

Objective : As an Electronics Design Engineer, responsible for Executing electronic hardware development processes in accordance with ISO13485, Developing and fabricating production functional test equipment, or facilitate external procurement of same.

Skills : C++, Autocad, Matlab, LabView, Cadence, Etc. See Below.

Description :

    1. Designed and debugged electronic hardware.
    2. Designed and debugged firmware.
    3. Tested and qualified of electronic hardware.
    4. Created and modified electronic schematics.
    5. Created documentation required for creation of printed circuit boards.
    6. Created design description documentation.
    7. Participated in the research and development of the microchips; Pike, Redfin, Chihuahua, Nautilus and Cardinal.
Years of Experience
Experience
2-5 Years
Experience Level
Level
Executive
Education
Education
Masters Of Engineering

Electronics Design Engineer Resume

Objective : Electronics Design Engineer with experience in scripting and optimization, project development, performance, and support. Experience in ATP testing and data processing with different tools. Optimization experience in CDMA, LTE, and UMTS using different client tools. Looking to couple experience in large enterprise-wide programs and projects with organizational transformation, process re-design, and driving change for more effective and efficient as RF Engineer.

Skills : PLC, HMI, SCADA Network, Programming, Interfacing.

Description :

    1. Designed ICs Integrated Circuits using Altera EPLDs for electronic circuit boards used in testing the Tomahawk Cruise Missile Seeker at Eglin Air Force Base.
    2. Utilized ViewLogic CAD for circuit design 
    3. Designed a Video Frame Capture and Processor board (VFCP) which acquired frames of RS170 analog video pixel data at 30Hz.
    4. Digitized and stored as reformatted non-interlaced lines.
    5. Designed to include the capability to multiply incoming pixels data by a global gain value plus a Focal Plane Array Responsivity gain value stored in a look-up-table.
    6. Subjected to a magnitude limit via another look-up-table and then stored within the onboard memory.
    7. Validated and qualify microchips according to design specifications.
Years of Experience
Experience
2-5 Years
Experience Level
Level
Executive
Education
Education
BS In Electronics Engineering Technology

Electronics Design Engineer Resume

Objective : Assisting in the performance of systems design tasks, such as writing systems requirement specification, Writing the related design input, and design output documentation supporting this development activity.

Skills : Managing Skills, Monitoring Skills, Implementation Skills.

Description :

    1. Configured DUT via MDIO and RS232.
    2. Collected and analyzed signal integrity test data (4 corners) at one Gbps to rates exceeding 10Gbps using cutting edge test instruments including signal sources, data generators, analyzers (BERT, jitter, network, spectrum, phase noise, and digital communication), TDR, power meter, etc.
    3. Implemented and maintained test pattern scripts/GUIs (in VB).
    4. Realized laboratory test and measurement instruments, and maintain automated tests in Labview.
    5. Implemented wiring changes to evaluation boards, and check to interconnect components (coaxial, IPass, CX4).
    6. Troubleshoot to failures and anomalies.
    7. Wrote formal reports detailing test results.
Years of Experience
Experience
2-5 Years
Experience Level
Level
Executive
Education
Education
GED

Electronics Design Engineer Resume

Summary : Hands-on Electronics Design Engineer with over 15 years of experience managing complex software projects and cross-functional development teams. Projects include custom software development and third-party product implementation.

Skills : PCB Layout, Analog, And Digital Circuit Design, Test Equipment Design, C++, LabVIEW, Product Design Verification & Certification.

Description :

    1. Responsible for digital hardware design at the board level.
    2. Led prototyping and production effort.
    3. Coordinated cross-discipline team.
    4. Responsible for scheduling and budget.
    5. Projects included test equipment for the GPS system, voice, modem, and COMSEC (communications security) modules.
    6. Designed Xilinx FPGAs.
    7. Performed schematic capture and worst-case timing simulations.
Years of Experience
Experience
10+ Years
Experience Level
Level
Senior
Education
Education
Master Of Engineering

Electronics Design Engineer Resume

Objective : Defining embedded system electrical architecture; optimizing for cost, space, or performance as guided by customer priorities, and also Thoroughly documenting design requirements of circuit blocks; calculating, simulations, power modeling, characterization testing results.

Skills : Cyber Systems Architecture, System Integration, Systems Engineering And Architecture, Concept Of Operations Development, Cyber Operations Workflow, Integrated Product TeamLead, Project Scheduling, Cyber Operations.

Description :

    1. Engineered and experiment designed for new product test fixtures at vendor sites.
    2. Provided key vendors with proprietary circuits and engineering support for prototype equipment from several divisions of KLA-Tencor including off-site project supervision of contractors.
    3. Developed electron gun feasibility test system using National Instruments PXI Bus equipment and LabVIEW.
    4. Supported contractors to meet their schedule objectives.
    5. Designed bench top Scanning Electron Microscopes.
    6. Embedded programming of Analog Devices Blackfin programming in C and assembly language.
    7. Formulated test procedures and wrote test software in C under UNIX.
Years of Experience
Experience
2-5 Years
Experience Level
Level
Executive
Education
Education
BS In Electrical Engineering

Electronics Design Engineer Resume

Objective : Electronics Design Engineer with 5 years of experience in Developing relationships within existing accounts and new divisions, locations, and customers, Generating newly named business by phone, customer visits, and events.

Skills : Cadence OrCAD Circuit Simulation Package, Mentor Graphics.

Description :

    1. Prepared designs to ensure compatibility with product certification requirements.
    2. Contributed to data collection for reviewing designs and related materials.
    3. Investigated and suggested product improvement strategies.
    4. Developed product specifications in consultation with customers.
    5. Produced schematics and designs for digital and analog circuits.
    6. Expanded the capability for electronic hardware development at the Hudson location, in collaboration with existing electrical engineering staff.
    7. Performed the development of electronic hardware for portable battery-powered medical devices, especially but not exclusively: component selection, schematic design, PCB layout, and laboratory testing.
Years of Experience
Experience
2-5 Years
Experience Level
Level
Executive
Education
Education
GED

Electronics Design Engineer Resume

Objective : Electronics Design Engineer with 3 years of experience in developing and managing a funnel of opportunities and activities, Collaborating closely with Application Engineering and Technical Marketing.

Skills : Analog Design, Digital Design.

Description :

    1. Responsible for the development and the design of new electronic products, meeting all applicable codes and standards.
    2. Implemented product improvements in cost, function, and quality.
    3. Responsible for the design of special products and modification, determine design cost-effectiveness and justification meet quality and reliability standards set by the new product development teams.
    4. Designed experiments and coordinate test set-ups.
    5. Developed designs in products as well as process improvements.
    6. Created drawings by revise engineering.
    7. Managed projects and coordinate with Product Marketing Managers, arrange meetings with suppliers, vendors, and all applicable departments.
Years of Experience
Experience
2-5 Years
Experience Level
Level
Executive
Education
Education
Bachelor Of Science

Electronics Design Engineer Resume

Summary : Attaining monthly/quarterly/annual sales goals for new software licenses, maintenance service, and professional services (consulting and product training), and also Expanding Mirabilis Design market presence and reputation within the territory.

Skills : Designing Skills, Managing Skills, Multitasking.

Description :

    1. Organized compliance testing and certification of agricultural electronic subassemblies to international specifications (CE, e-Mark, c-Tick, FCC).
    2. Performed troubleshooting, circuit design, and layout analysis to help products meet international and OEM EMC standards.
    3. Performed ESD, EMI, steady-state, and transient electrical tests on product prototypes.
    4. Designed and laid out 2 and 4 layer PCB's with through-hole and surface mount components using PADS schematic capture and layout tools.
    5. Worked with contract manufacturers to ensure proper board manufacturing and assembly, and also to assess and mitigate possible manufacturing risks and failures.
    6. Wrote and reviewed engineering documents such as product requirements, design documents, test plans, and engineering change requests.
    7. Validated and qualified microchips according to design specifications.
    8. Designed and executed testing experiments and analyze/interpret results.
Years of Experience
Experience
7-10 Years
Experience Level
Level
Management
Education
Education
MS