An Equipment Specialist is a highly qualified professional for a specific type of machine, system or device. The Specialist as the name suggests is an expert in the uses, functions, and processes of a particular machine. The major tasks executed by this position and listed on the Equipment Specialist Resume falls nothing short of these – certifying the maximum exploitation of the particular machine or system, managing the design and usability of the machine, ensuring that the machine works to the optimum and achieves maximum efficiency, undertaking responsibility of providing overall safety in the workplace through safe operations, and specializing in major troubleshooting tasks in terms of breakdown, failure or malfunction.
The job skills for this position doesn’t end with a mere knowledge of equipment functioning and maintenance, these key abilities are as well expected – expert knowledge of automotive equipment and components, in-depth knowledge of electrical equipment, chemical equipment, engines and turbines; and strong mechanical aptitude. To gain this indispensable position, candidates are supposed to possess relevant Engineering degree and gain a specialty in a particular field.
Summary : Equipment Specialist/Consultant seeking a position in your esteemed concern, by providing the opportunity to make a strong contribution to organizational goals through the development of professional skills. To work in a challenging environment and to use the technical and intellectual skills in the best of the organization's interests.
Skills : Process Improvement, Data Analysis, Product Development, Supplier Management.
Description :
Provided assistance to higher and lower grade technicians to develop and maintain responsible factors based on guidance and procedures set forth by the D200 system and compute requirements.
Served as lead ES and configuration manager for the Pods and many major combat electronic weapon systems.
Reviewed and coordinated the completed work of lower graded technicians for technical accuracy and comprehensiveness.
Briefed Configuration Management Review Boards on all configuration changes and provided technical assistance on a worldwide basis.
Hosted Technical Interface Meetings with user commands.
Established scope of maintenance, repair, test, software requirements, and calibration to be performed by organizational, intermediate, or depot on assigned systems.
Made on the spot decisions relative to the level of maintenance on the system.
Investigated, analyzed, and recommended corrective action on repair and support problems on a continuing basis to enhance repair policies and procedures.
Experience
10+ Years
Level
Consultant
Education
Bachelor Of Science
Senior Equipment Specialist Resume
Summary : Senior Equipment Specialist looking forward to joining a progressive organization that gives a hike to update the practical knowledge and skills in conformity with the tardiest trends and be part of a team that dynamically works towards the growth of the company and attains satisfaction.
Serve as an Equipment Specialist in the Nuclear Biological and Chemical (NBC) Defense System Office.
Provide technical and logistical support to the lead logistician in regards to NBC equipment and Chemical Biological Reconnaissance Nuclear (CBRN) weapon systems.
Collect, analyze, interpret and develop specialized information concerning NBC Equipment and Joint Biological Point Detection Systems.
Review, update, analyze and provide solutions to Product Quality Deficiency Reports (PQDRs), Statements of Work (SOW) and Operator/Maintenance Manuals.
Establish Contract Data Requirement Lists (CDRLs) for Joint Service Transportable Decontamination (Small Scale) Systems.
Provide updates to fielded material documents such as the User's Logistics Support Summary (ULSS), Modification Instructions (MI), Technical Instructions (TI) and Supply Instructions (SI).
Identify and recommend practical solutions to engineering use of substitute testing of support equipment.
Experience
7-10 Years
Level
Senior
Education
Bachelor Of Science
Junior Equipment Specialist Resume
Objective : Junior Equipment Specialist experienced with work management systems to access and research required data to develop maintenance work packages. Experience with Windows, WordPerfect, Microsoft Word, and Excel programs. Experience includes Substation Relay equipment, Breakers, Transformers, and Protective Relays.
Responsible for the safe and efficient operation of plant equipment and the entire generating unit.
Performed duties involving mechanical and electrical maintenance.
Responsible for operating and maintaining, including but not limited to: circulating water systems, condensate/feedwater systems, boiler systems, turbine systems, generator systems, electrical systems, and various other plant systems.
Monitored equipment temperature, pressure, flow, and level gauges to assess the condition of the equipment and enter data into handheld electronic devices.
Performed electrical and mechanical duties as required at journeyman level to maintain equipment.
Required to use an assortment of tools that will include electrical test equipment meters, hand tools, and power tools both electrical and air operated.
Presented and explained ROI worksheets to dentists for the visual realization of their full income potential.
Experience
2-5 Years
Level
Junior
Education
Bachelor Of Science
Lead Equipment Specialist Resume
Summary : Highly inquisitive, creative & talented Lead Equipment Specialist with significant and progressive experience in driving Quality Management Initiatives, and fostering efficiency in a manufacturing setup. Generating quality control analysis report including internal and subsequently improving inspection activities and check sheets.
Skills : Microsoft Excel, Soldering, Equipment Maintenance.
Description :
Worked closely with dentists, architects, general contractors, and the dental equipment install team to facilitate a smooth transition for the dentist and staff.
Coordinated dental equipment, software, and technology ordering and installs for new and existing dental offices.
Utilized AutoCAD software assists with new construction design or existing dental office remodels.
Conducted site specs during the construction process that eliminates unnecessary project delays.
Communicated and works directly with local dental manufacturer representatives, understanding their specific products and how it will benefit the dentist and staff.
Worked with financial institutions to secure funding for new dental offices and/or equipment projects.
Co-traveled and cold calls account to identify dental equipment and technology opportunities.
Experience
7-10 Years
Level
Senior
Education
Bachelor Of Science
Associate Equipment Specialist Resume
Objective : Possess good communication and interpersonal traits with a talent for problem-solving through reasoned thought processes. To work in an exciting and professional environment of an organization with continuous learning, development and growth Possibilities. Willing to work as a key player in challenging & creative environment.
Skills : Microsoft Office, Engineering Management, Programmable Logic Controllers.
Description :
Used DEXS and SIMA daily to create and revise routing documents.
Provided status to production shops on a continuing basis until the item is received and in operation.
Analyzed repair procedures and recommend solutions and improvements to pilot overhaul functions.
Analyzed information such as AEDs, MWOs, drawings to the determined impact of design changes for completeness, correctness and whether local fabrication is feasible including identifying requirements for special tools and equipment.
Used ESS to enter MECs and monitor MEOs.
Initiated ATCOM Engineering Changes AECs when requested by shop floor personnel to prevent production delays.
Worked as a member of a team or independently coordinating work requirements for use and application in formal and major overhauls and work requirement verifications.
Experience
2-5 Years
Level
Junior
Education
Associates
Assistant Equipment Specialist Resume
Objective : To contribute to the firm, which offers the potential for personnel, as well as organizational growth and work in a challenging environment with hard work and excellence by facing new challenges at every step of the life to leading a personal and professional growth.
Reviewed the extracts of the tape/hard copy provisioning parts lists for adequacy.
Worked with the suppliers for the initial issue of spare parts required for the support of each unit receiving the end item.
Coordinated with the suppliers on delivery, cost, and any revisions to spare parts for the end item.
Reviewed the technical manual for adequacy on the electric shelter we were fielding.
Wrote Phase Out Plans for equipment that was being phased out of the Marine Corps.
Wrote Principal End Item Transfers for electronic equipment.
Accomplished team goals for the company's department of equipment.
Implemented new tactics to make the department more efficient.
Experience
2-5 Years
Level
Junior
Education
Diploma
Equipment Specialist - Intern Resume
Objective : Equipment Speciali capable of multitasking and achieving targets under pressure and tight deadlines. Quick learner and communicator with excellent interpersonal and relationship
management skills. Comprehensive experienced in the field instruments and control systems procurement activities.
Skills : Process Improvement, Data Analysis, Product Development.
Description :
Established and maintained stock records and other documents such as inventory, materiel control, accounting, and supply reports.
Retained automated and manual accounting records, posts receipts and turn-ins, and performs dues-ins and dues-outs accounting.
Analyzed and corrected errors on documents.
Reviewed and verifies quantities received against bills of lading, contracts, purchase requests, and shipping documents.
Unloaded, unpacked, visually inspected, and counted, segregated, palletized, and stored incoming supplies and equipment.
Managed stock locator system and administers document control procedures.
Repaired and constructs fiberboard or wooden containers.
Packed, crated, stenciled, weighed, and banding equipment and supplies.
Experience
0-2 Years
Level
Entry Level
Education
Diploma
Equipment Specialist IV Resume
Summary : To work for an organization or company in the profession dealing with either maintenance, cleaning, stocking of supplies/inventory, moving or security. To utilize and demonstrate the hardworking ability, dependability, excellent customer service, and people skills as well as being a team player.
Skills : Naval, Factory, Machine Operation, Root Cause Analysis, Process Engineer.
Description :
Plan weekly and Monthly schedules, disturbed assignments.
Determine depot technical capabilities, production capabilities, and plant facilities and equipment for the accomplishment of planned work programs.
Determine cost estimates, program notices, and load time in LMP.
Determine workflow and develop draft process documents designating prime shops.
Initiate time standard requests, with details of the tasks that will be performed by the various shops involved.
Provide technical expertise and assistance in the assigned commodity area by coordinating pre-production planning.
Initiate special tool/manufacturing request; coordinate with engineering to determine if available test equipment can be modified.
Experience
10+ Years
Level
Consultant
Education
Masters of Science
Equipment Specialist II Resume
Summary : Motivated and goal-oriented drafting Equipment Specialist II with experience in mechanical, electrical, and piping fields as well as project management and job planning. Committed and ready to grow with a new challenge and opportunity.
Headed the Special Projects Department with a focus on new-build design and equipment upgrades.
Managed projects from design concept to final product.
Multitask between operational needs and long term maintenance goals.
Worked with large, multiple part assemblies in Autodesk Inventor.
Prepared piping schematics, symbol P&IDs, and to-scale equipment site layouts in AutoCAD for future job planning.
Developed parts numbering and inventory system.
Managed third party contractors in Keane shop and on the job location.
Experience
10+ Years
Level
Consultant
Education
Associates
Equipment Specialist - Part Time Resume
Objective : Aspiring for a challenging career to build the skills professionalism and experience in an environment that promotes continual upgrading of knowledge with a strong opportunity for advancement within the company. Excellent communication & interpersonal skills with strong analytical, team-building, problem-solving and organizational abilities.
Skills : Certified Technical Trainer, Instructional Design, Process & Performance Improvement, ISO Auditor, Quality Coordination.
Description :
Set up, ran and monitored various complex, high-speed machine tools.
Performed minor maintenance and made adjustments to various equipment as needed.
Utilized Six Sigma, lean manufacturing and 5S Methodologies in the processing of silicon wafers.
Machine operator for the production of the semiconductor silicon wafer in its beginning stages.
Followed precisely the specification for an accurate product.
Used micrometers and other measuring tools necessary for wafer fabrication.
Served as Equipment trainer for new equipment operators.
Experience
2-5 Years
Level
Junior
Education
Bachelor Of Science
Equipment Specialist Resume
Objective : To be associated with a progressive organization that enhances individual, competency, vision & determination that provides an opportunity to apply the knowledge and skills in order to keep abreast with the latest trends and technologies.
Skills : Programmable Logic Controllers, Microsoft Excel, Soldering, Equipment Maintenance.
Description :
Operated forklift to unload and load baskets from trucks.
Operated overhead crane to load and unload tools for baskets.
Assembled and disassembled wellbore tools such as brushes, scrapers, and negative test packers.
Assembled and disassembled fishing tools such as: reversing tools, HE cutters, multi-string cutters, and hydraulic cutters.
Ran the torque machine to tighten and loosen up tools.
Dispatched out for trucks and made tickets using the SAP system.
Provided daily report to supervisor on which maintenance shops did not send required reports.
Creating an account is free and takes five seconds.
You'll get access to the PDF version of this resume template.
Choose an option.
Sign up with Google
Sign up with Facebook
Sign up with Linkedin
This helps us make sure you're human and prevents spammers from abusing our services.
By continuing, you agree to our Privacy Policy and Terms.
Unlock the Power of Over 10,000 Resume Samples.
Take your job search to the next level with our extensive collection of 10,000+ resume samples. Find inspiration for your own resume and gain a competitive edge in your job search.
Get Hired Faster with Resume Assistant.
Make your resume shine with our Resume Assistant. You'll receive a real-time score as you edit, helping you to optimize your skills, experience, and achievements for the role you want.
Get Noticed with Resume Templates that Beat the ATS.
Get past the resume screeners with ease using our optimized templates. Our professional designs are tailored to beat the ATS and help you land your dream job.
