Fitter Resume Samples

A Fitter will assemble and construct various mechanical systems, and such systems can be anything from a machine to the pipe that carries chemicals for the manufacturing process. While the roles and responsibilities for the post vary widely based on the area of specialization, a well-drafted Fitter Resume gives a list of the following duties – constructing structural components based upon the given blueprint, inspecting structural systems, fitting components together and creating a finished system, repairing and troubleshooting mechanical systems.

Most of these positions are based on technical and vocational skills, but the following abilities are as well necessary – manual dexterity, ability to operate various hand tools, mechanical skills to understand and use the appropriate tools, familiarity in using welding tools, and CAD; and experience with welding processes. Fitters gain their skills and education through on-the-job training, hence employers expect only a high school diploma.

Fitter Resume example

Fitter Resume

Objective : Over 22 years of experience in heavy labor positions including but not limited to Pipe Fitting, Oil Pipeline and well completions, home building and framing, as well as irrigation and excavation in industries including Fabricated Metal Products, Except Machinery and Transportation Equipment.

Skills : Proficient in Adobe Illustrator and Photoshop Lectra.

Description :

    1. Installed high point and low point vents and drains, ran areal lifts, fabricated and cut pipe, followed all safety procedures according to OSHA regulations.
    2. Assigned Select pipe sizes and types and related materials, such as supports, hangers, and hydraulic cylinders, according to specifications.
    3. Measure and mark pipes for cutting and threading.
    4. Assemble and secure pipes, tubes, fittings, and related equipment, according to specifications, by welding, brazing, cementing, soldering, and threading joints.
    5. Modify, clean, and maintain pipe systems, units, fittings, and related machines and equipment, following specifications and using hand and power tools.
    6. Cut and bore holes in structures, such as bulkheads, decks, walls, and mains, prior to pipe installation, using hand and power tools.
    7. Inspect work sites for obstructions and to ensure that holes will not cause structural weakness.
    8. Operate motorized pumps to remove water from flooded manholes, basements, or facility floors.
    9. Measured and marked pipes for cutting and threading.
Years of Experience
Experience
2-5 Years
Experience Level
Level
Executive
Education
Education
GED


Sr. Fitter Resume

Summary : In search of a fitting job in the steel fabricating industry. Also interested in exploring new fields of employment.

Skills : Pipe fitter, Welder.

Description :

    1. Fitted and aligned fabricated parts to be welded or assembled.
    2. Planed and developed layouts from blueprints and templates, applying knowledge of trigonometry, design, effects of heat, and properties of metals.
    3. Laid out and fabricated metal structural parts such as plates, bulkheads, and frames.
    4. Marked curves, lines, holes, dimensions, and welding symbols onto work pieces, using scribes, soapstone's, punches, and hand drills.
    5. Computed layout dimensions, and determined and marked reference points on metal stock or work pieces for further processing, such as welding and assembly.
    6. Located center lines and verify template positions, using measuring instruments such as gauge blocks, height gauges, and dial indicators.
    7. Lifted and position work pieces in relation to surface plates, manually or with hoists, and using parallel blocks and angle plates.
    8. Planned locations and sequences of cutting, drilling, bending, rolling, punching, and welding operations, using compasses, protractors, dividers, and rules.
Years of Experience
Experience
10+ Years
Experience Level
Level
Senior
Education
Education
Welding


Junior Fitter Resume

Objective : Over 8 Years of experience, including as a Machine Operator, as a Wire Border Assembler and as an Unloaded in industries including Health Services, Eating and Drinking Places and Wholesale Trade-Durable Goods.

Skills : Read blue prints,operate various equipment,layout.

Description :

    1. Responsible for fitting and welding skids and mud tanks following blue prints and drawings Laid out and mounted pumps, engines and electrical equipment, by tack welding and bolting onto the skids.
    2. Pipe fitted pumps and engines following blueprints specifications.
    3. Creatively perform alterations on bridal gowns Develop customize patterns Inspect sewing quality One on one with clients for best customer service In control of individual appointment schedule Operate industrial sewing machines.
    4. Responsible for installing and replacing gas lines on construction site.
    5. Duties:Fitting, structural beams for American airline building construction.
    6. Welding main columns for building construction.
    7. Released due to injury before 90 days probation.
Years of Experience
Experience
2-5 Years
Experience Level
Level
Junior
Education
Education
Technical

Lead Fitter Resume

Objective : Devoted customer service representative who sustains the highest level of customer service through efficient team and customer account management. Client relations specialist Skilled multi-tasker Meticulous attention to detail Strong organizational skills Focused on customer Invoice processing satisfaction Knowledge of HMOs, Medicare Conflict resolution techniques and Medicaid ICD-9 coding Strong work ethic.

Skills : Blueprint reading, Framing, Supervice constrution.

Description :

    1. Improved service quality and increased sales by developing a strong knowledge of company's products and services.Provided a high level of product and leadership support to representatives and clients.Resolved customer questions, issues and complaints.
    2. Personally fitted and provided patients with items that were prescribed by physicians.
    3. Developed highly empathetic client relationships and earned reputation for exceeding sales goals.
    4. Cross-trained and provided back-up for other customer service representatives when needed.
    5. Worked under strict deadlines and responded to service requests and emergency call-outs.
    6. Researched and resolved billing and invoice problems.
    7. Cooperated with Medicare, Medicaid and private insurance providers to resolve billing issues.
    8. Managed daily office operations and maintenance of equipment.
Years of Experience
Experience
2-5 Years
Experience Level
Level
Junior
Education
Education
Diploma In General

Associate Fitter Resume

Headline : A highly devoted and results-driven individual seeking a position as a fitter/welder with 10+ years of experience in using forklifts and cutting industrial materials.

Skills : Welder, Fitter, Foreman.

Description :

    1. Rebuilt skids, as well as working in miscellaneous material and all types of guards to include pump mounts, gearbox, host brackets, pump brackets.
    2. Lay out and examine metal stock or work pieces to be processed to ensure that specifications are met.
    3. Verify conformance of work pieces to specifications, using squares, levels, and measuring tapes.
    4. Tack-welded and fitted various components.
    5. Clamp, hold, tack-weld, heat-bend, grind and bolted component parts to obtain required configurations and positions for welding.
    6. Detect faulty operation of equipment or defective materials and notified supervisors.
    7. Monitor the fitting, burning, and welding processes to avoid overheating of parts or warping, shrinking, distortion, and expansion of material.
Years of Experience
Experience
5-7 Years
Experience Level
Level
Executive
Education
Education
Diploma

Fitter/Welder Resume

Summary : Dedicated Fitter with 10 years experience in carpentry and construction. Excels at analyzing and solving problems using design software and systems knowledge.

Skills : Mig and stick welding, Layout and blue print reading, Plasma burner, cutting torches, Inspect machined parts.

Description :

    1. Fitted and welded several different types of tanks and vessel.
    2. Rigging and the moving of material to build and fit tanks and vessels.
    3. Build big steels welded form and welded rebar to construct the new shop warehouse.
    4. Operated skid steer front end loader forklift and cherry picker.
    5. Followed established job site safety regulations and maintained a safe and clean work area.
    6. Planned and executed work with the proper tools and materials to maximize efficiency.
    7. Read and interpreted blueprints and construction documents to determine project directives.
    8. Planned projects by identifying necessary equipment, tools needed, accurate take offs and required assistance.
Years of Experience
Experience
10+ Years
Experience Level
Level
Senior
Education
Education
Welding

Fitter/Mechanic Resume

Summary : Conscientious and detail oriented, reputation for dependability, integrity, and professionalism. Wide knowledge of techniques, materials and equipment related to repair and maintenance of facilities.

Skills : Microsoft Office Word.

Description :

    1. Construction and development of Coker steam unit.
    2. New pipe construction, steel & bolt up erecting, calibrating mechanical pump and motor assembly.
    3. Access database for maintenance, performance calibration and inspection of operational lines.
    4. Served as first responder for all facility and equipment issues.
    5. Logged detailed and thorough records of maintenance performed.
    6. Responsible for fitting various chutes, manholes, and tank parts for field assembly at different locations.
    7. Certified with MSHA card to attend various shutdowns.
Years of Experience
Experience
10+ Years
Experience Level
Level
Senior
Education
Education
Diploma

Fitter Helper Resume

Headline : Fitter with proven ability to fabricate structures and pipes. Reliable worker with strong mechanical aptitude and a willingness to learn. Desiring to work for a respectable company who values their employees and appreciates their hard work and dedication. Willing to learn new trades and give 100% to master them.

Skills : Supervision.

Description :

    1. Accurately read, understood, and carried out written instructions.
    2. Attended monthly safety meetings to ensure machine operation safety.
    3. Communicated operational issues and changes to supervisor on regular basis.
    4. Employed wide variety of hand and power tools including hoists, drills, precision measuring instruments and electronic testing devices.
    5. Followed company procedures to maintain work environment in a neat and orderly condition.
    6. Promoted shop safety by working in a safe manner.
    7. Trained with company experts to weld intricate parts.
    8. Used hand tools to change worn cutting tools.
Years of Experience
Experience
5-7 Years
Experience Level
Level
Executive
Education
Education
Diploma

Fitter/Plumber Resume

Summary : Experienced Fitter/Welder with extensive experience in all phases of heavy steel fabrication including supervision and shop operations. Hands on background in fitup and welding in the fabrication of heavy industrial equipment and assembly including steel fabrication of processing equipment, power transmission structures, and chassis for overseas shipping containers.

Skills : High skills in math, Hard worker, always bring a positive work.

Description :

    1. Responsible for correctly constructing machine assemblies per blueprint instructions.
    2. Certified and maintained quality standards per ISO 9001 specifications.
    3. Coordinated information with all involved departments.
    4. Operated overhead cranes, and powered industrial trucks.
    5. Used oxy, plasma, and carbon arc cutting systems.
    6. Proficient in MIG, and stick welding all positions for carbon and stainless steel and alloy electrodes.
    7. Operated the shear, saw, drill press, brake press, and ironworker.
Years of Experience
Experience
10+ Years
Experience Level
Level
Senior
Education
Education
Diploma

Fitter/Operator Resume

Objective : Past number of years been employed in the offshore drilling industry as a Roughneck/Floor hand. Held a wide variety of jobs including a year or more with Hydrochem, in the chemical cleaning division. Having grown up with a mechanical engineer for a father

Skills : Welder, Technician.

Description :

    1. Completed tear-down of existing structures and prepared for new construction.
    2. Provided accurate measurements and estimates for all projects.
    3. Consistently assumed additional responsibilities and worked extended hours to meet project deadlines.
    4. Monitored inventory and reported items to be restocked for each job.
    5. Cleared drains and downspouts and cleaned gutters.
    6. Prepared and cleaned construction sites by removing debris.
    7. Loaded and unloaded building materials used for construction.
Years of Experience
Experience
2-5 Years
Experience Level
Level
Junior
Education
Education
Diploma