A General Maintenance Mechanic takes responsibility for repairing, installing, and maintaining machines, mechanical equipment, and buildings. The job description also entails handling all types of plumbing and electrical work and controls. Other daily duties are seen on the General Maintenance Mechanic Resume as – performing minor construction or carpentry work; undertaking preventive maintenance to keep the physical structures of buildings; maintaining and repairing specialized equipment and machinery, and undertaking all other minor and major maintenance tasks.
To ensure success in this field, the following skills are needed – knowledge of building and equipment maintenance and repair techniques, skillful in applying building and equipment maintenance and repair technique; skillful in verbal and written communication; and general maintenance and repair experience. A Diploma is commonly considered as the minimum requirement.
Summary : Reliable, experienced maintenance mechanic seeking position operating, repairing, constructing, and maintaining equipment and facilities.
Skills : Certified On Fork Lifts, Pallet Riders, Tuggers, Stan Up For Lift Pickers.
Description :
Investigated problems, troubleshoot causes, and perform repair processes in all areas of facilities.
Constructed, modified, devised, and altered new or existing facilities and equipment.
Provided services which included repairing locks and doors, cut and issued keys.
Maintained and operated wastewater system and cleanroom.
Devised and implemented Standard Operating Procedure to improve efficiency.
Maintained and repaired environmental chambers and vacuum furnaces utilized for production and development.
Monitored work orders program and issued work orders, gave direction and provided instructions to other mechanics.
Experience
10+ Years
Level
Senior
Education
BA in Industrial Studies
General Maintenance Mechanic Resume
Summary : Maintenance Mechanic General Maintenance Mechanic. Analyzes machine failures, overhauls dismantles, adjusts, and makes general repairs to machines, machine tooling centers. All that requires accurate alignment and fitting to close tolerances.
Skills : Hand Tools, Safety Training, Maintenance, Team Player.
Description :
Responsible for all phases of Maintenance- Welding, air arching acetylene gas and plasma cutting, pipefitting, troubleshooting electrical 3 phase, and all controls.
Repaired on large compressors, governors, large thrust bearings, shoe type bearings, and generators.
Responsible for plant utilities;2000 KW emergency generator, boilers, air compressors, and all substations.
Replaced buckets threw switch gears or tiebreakers to keep power to the plant dealt with 13800 down to 24 volts AC.
Performed preventive maintenance and repairs on the test shop hydraulic system.
Performed scheduled preventive maintenance on various machines.
Experience
10+ Years
Level
Senior
Education
High School Diploma
General Maintenance Mechanic Resume
Objective : Seeking a safety position that will utilize commitment to service and safety while allowing for further education and advancement.
Skills : Microsoft Office, Safety Management, Project Management, Analysis.
Description :
Maintained all safety and training documentation as required by OSHA.
Provided customer assistance and advice in a professional and proficient manner.
Responsible for performing all semi-annual and quarterly safety inspections as required by IAP, Fort Irwin, and OSHA.
Monitored and ensure all MOUT sites and Cave Complex safety directives were followed.
Assisted in the planning and organization of work schedules while ensuring all required tasks were accomplished in a timely manner.
Coordinated employee safety and tool training while certifying employees' understanding of standard operating procedures.
Performed worksite inspections for proper PPE and tool usage Inspect equipment to ensure safe operation.
Fabricated and constructed specialty items for Iraq villages at Fort Irwin.
Maintained a high skill level in woodworking and masonry for the high level of repairs in the training areas.
Experience
2-5 Years
Level
Junior
Education
Diploma in Welding
General Maintenance Mechanic Resume
Objective : A creative, critical, and curious young professional with the ability to energize individuals and organizations to be the best they can possibly be. Seeks to continue the career in the engineering field and gain experience and knowledge to benefit growth and future progress.
Operated HVAC and Life Safety System (Generators and Fire Control System) for three commercial properties.
Maintained daily, weekly, and monthly logs for HVAC and Life Safety System.
Operated and monitored equipment during Start-Up and Shut-Down Process at multiple building properties.
Performed weekly and monthly Life Safety System Tests of Emergency Generators Maintained and Serviced VAV boxes and HVAC controls (T-Stats).
Maintained and updated HVAC EMS schedules per load demand and programmed Overtime HVAC requests.
Performed electrical maintenance and repair, replaced ballasts, ran conduits, replaced outlets, and installed light fixtures.
Performed plumbing maintenance and repair, snaked drains, replaced and serviced Sloan Valves, and plumbing fixtures.
Maintained and updated invoices, work orders, purchase orders, and employee information in interoffice files and on a computer database.
Experience
2-5 Years
Level
Junior
Education
Diploma in Welding
General Maintenance Mechanic Resume
Summary : Likable and dedicated General Maintenance Mechanic with over 21 years of experience in a fast-paced company. Seeks to obtain a position that will utilize my skills, abilities, and experience to contribute to the company's success.
Skills : OSHA 10 Certified, MS Office, HVAC.
Description :
Repaired or maintained the operating condition of industrial production or processing machinery or equipment.
Repaired or replaced broken or malfunctioning components of machinery or equipment.
Disassembled machinery or equipment to remove parts and make repairs.
Observed and tested the operation of machinery or equipment to diagnose malfunctions, using voltmeters or other testing devices.
Reassembled equipment after completion of inspections, testing, or repairs.
Cleaned, lubricated, or adjusted parts, equipment, or machinery.
Examined parts for defects, such as breakage or excessive wear.
Operated newly repaired machinery or equipment to verify the adequacy of repairs.
Analyzed test results, machine error messages, or information obtained from operators to diagnose equipment problems.
Experience
10+ Years
Level
Senior
Education
Diploma In Mechanical
General Maintenance Mechanic Resume
Summary : Accomplished and energetic General Maintenance Mechanic with a solid history of achievement. Motivated leader with strong organizational and prioritization abilities.
Skills : Knowledge Of G And M Codes, Knowledge Of GD&T Symbols, Knowledge Of Geometry And Trigonometry, Program Editing.
Description :
Inspected, operated, or tested machinery or equipment to diagnose machine malfunctions.
Performed routine preventive maintenance to ensure that machines continue to run smoothly, building systems operate efficiently, or the physical condition of buildings does not deteriorate.
Diagnosed mechanical problems and determine how to correct them, checking blueprints, repair manuals, or parts catalogs, as necessary.
Assembled, installed, or repaired wiring, electrical or electronic components, pipe systems, plumbing, machinery, or equipment.
Inspected drives, motors, and belts, check fluid levels, replace filters, or perform other maintenance actions, following checklists.
Cleaned or lubricated shafts, bearings, gears, or other parts of machinery.
Repaired or replaced defective equipment parts, using hand tools and power tools, and reassemble equipment.
Recorded type and cost of maintenance or repair work.
Operated cutting torches or welding equipment to cut or join metal parts.
Experience
10+ Years
Level
Senior
Education
BS In Mechanical
General Maintenance Mechanic Resume
Summary : Competent professional offering 8+ years of experience and skills in the Engineering department. 6+ years working with management on large and small construction projects.
Assured the proper operation of a wide variety of mechanical machines and devices including pumps, engines.
Maintained reverse osmosis water purification system (e.g. routine water testing, change/replace filters, refill of chemicals to purify water).
Performed electrical maintenance to include replacement or repair of fixtures (e.g.wall switches and outlets, incandescent and fluorescent bulbs and tubes, ballasts, sockets, fuses, small appliances, cords, etc.) using appropriate hand, power, and specialty tools.
Performed minor plumbing maintenance (e.g. replacement or repair of leaks in drains and faucets, unclogging of drains).
Performed minor painting, carpentry, and masonry work (e.g. preparing surfaces and using a brush, or roller to apply paints).
Troubleshoot and repaired conveyors, motors, controls, and automation equipment.
Operated, maintained, repaired, and installed facilities equipment.
Experience
7-10 Years
Level
Management
Education
Computer Networking
General Maintenance Mechanic Resume
Objective : An accomplished, versatile, and results-driven General Maintenance Mechanic with proven individual and team performance in rapidly changing, dynamic environments. Hands-on, team player with progressive success aligning teams to drive business results in the industry.
Skills : Lock Out/Tag Out Certified, CPR Certified For Adults, Forklift Certified, Fire Safety, Climbing, Confined Space Certified, Electrical Equipment.
Description :
Utilized welding, carpentry, electrical repair, mechanical repair, and installation skills.
Inspected and tested equipment, made necessary repairs, and minor adjustments to equipment.
Replaced worn and broken parts, and installed parts and equipment.
Used hand tools, power tools, electrical and electronic testing devices, hoists and lifts, and pullers.
Took apart and re-assembled equipment.
Performed preventative maintenance.
Checked performance of machinery and equipment, checked fluid levels.
Experience
0-2 Years
Level
Entry Level
Education
Welding
General Maintenance Mechanic Resume
Objective : Driven and well-organized professional with 7+ years of experience. Passionate about developing new businesses and planning marketing strategies. Seeks to obtain a position in the electrical maintenance department.
Skills : Carpet Installation and Repairs, Hand Tools, MS Office, Team Management.
Description :
Performed maintenance tasks as outline by the maintenance manager.
Performed scheduled preventive maintenance tasks as outlined by the maintenance manager.
Proactive in addressed machine inefficiencies during preventative maintenance.
Evaluated operator checklist and comments prior to performing preventative maintenance to ensure all causes for production inefficiencies are addressed and corrected.
Troubleshoot hydraulic, pneumatic, electrical, mechanical, and process problems with equipment as needed or directed by management or production supervisor.
Completed the appropriate paperwork required by all work orders.
Communicated problems, progress reports, and continuous improvement ideas to management and maintenance personal.
Notified maintenance supervisor of recurring equipment malfunctions and corrective action taken.
Experience
2-5 Years
Level
Junior
Education
Diploma
General Maintenance Mechanic Resume
Summary : Maintenance Mechanic with 2+ years of experience in now seeking to gain and maintain long term employment in an environment where one can use advanced customer service skills to ensure customer satisfaction. Seeks to apply an aptitude and talent for design and fabrication to an organization that values teamwork, encourages, and rewards success.
Skills : Microsoft Office, Programming, Hardware.
Description :
Worked involving a variety of the following duties using plaster or compound to patch minor holes and cracks in walls and ceiling, painting structures.
Replaced damaged paneling and floor tiles, hanging doors and installing door locks, replacing broken window panes.
Performed general maintenance on equipment and machinery and other general work assignments.
Managed mechanical systems and optimized performance throughout the system on daily basis.
Provided Technical Support with computer systems of Emergencies in the workplace.
Monitored computer systems for equipment Failure, Malfunction.
Initiated contingencies of equipment for malfunction upon startup, or power outage.
Provided, maintained, supplied proper air distribution of equipment with high demand.
Creating an account is free and takes five seconds.
You'll get access to the PDF version of this resume template.
Choose an option.
Sign up with Google
Sign up with Facebook
Sign up with Linkedin
This helps us make sure you're human and prevents spammers from abusing our services.
By continuing, you agree to our Privacy Policy and Terms.
Unlock the Power of Over 10,000 Resume Samples.
Take your job search to the next level with our extensive collection of 10,000+ resume samples. Find inspiration for your own resume and gain a competitive edge in your job search.
Get Hired Faster with Resume Assistant.
Make your resume shine with our Resume Assistant. You'll receive a real-time score as you edit, helping you to optimize your skills, experience, and achievements for the role you want.
Get Noticed with Resume Templates that Beat the ATS.
Get past the resume screeners with ease using our optimized templates. Our professional designs are tailored to beat the ATS and help you land your dream job.
