Hydro Test Engineer Resume
Summary : As a Hydro Test Engineer, responsible for checking hydro test equipment and instruments, Executing and supervising pigging, testing, and drying of the pipeline, being involved in the fabrication and installation of subsystems, and Designing, operating, inspecting, optimizing, and maintaining dams, penstocks, spillways, powerhouses, generator rewinds, and turbine replacements.
Skills : Analytical, problem-solving, Communication, interpersonal.
Description :
- Interpreted advanced isometric drawings, plan drawings, line specifications, and welding procedures.
- Checked the pressure handling capacity of the pressure vessels (pipelines, boilers, plumbing, gas cylinders.)
- Understood the threshold values and margin limits for testing.
- Checked the testing setup and testing equipment.
- Discussed the product details with the manufacturing team.
- Tested the underwater high-pressure pipes, and set specifications for yield testing.
- Prepared data sheets of the conducted tests and results.
Experience
10+ Years
Level
Senior
Education
Bachelor's degree in Mechanical Engineering
Hydro Test Engineer Resume
Summary : As a Hydro Test Engineer, responsible for Reviewing and approving subcontractor and supplier documentation including quality plans, inspection and test plans, manufacturing/welding procedures, inspections and test procedures, and manufacturing records, Coordinating and monitoring the hydro tests and reports on the completion of hydro tests.
Skills : Testing, Reporting, Quality Planning.
Description :
- Ensured that workers involved in the hydro testing works are properly guided, is completed in accordance with prescribed information prior to pneumatic and hydrostatic pressure tests being carried out for all test packages.
- Prepared technical report, lists of outstanding items on a punch list submits it for construction to carry out the required test.
- Monitored the hydroâ€testing (hydrostatic and pneumatic) and handled reports on the completion of tests and
to supervise line cleaning after the hydro test.
- Ensured completeness, punch list preparation, and readiness for hydro test activities.
- Interfaced with equipment, piping, instrumentation, electrical inspectors, civil/structural inspectors, field engineers, and another field superintendent before proceeding with hydro tests of systems.
- Interfaced with the client’s Quality Assurance representative for his presence at the test.
- Reviewed the documentation relevant to the systems and ensured the systems were constructed in accordance with the prescribed
information – drawings, specifications, and vendor information.
Experience
7-10 Years
Level
Management
Education
Bachelor's degree in Mechanical Engineering
Hydro Test Engineer Resume
Headline : As a Hydro Test Engineer, responsible for Coordinating with the Project Manager and supervising the preparation of test activity to ensure all deficiencies are identified and punch lists are prepared, determining the approximate margins and check for threshold, determining the leakages and deformation details, and also testing the Water Tube Boiler as per the pressure and temperature mentioned in the specifications.
Skills : Attention to detail and familiarity with testing equipment and methods.
Description :
- Demonstrated a professional work ethic and actively participated as a member of the Discipline Workforce Planning Team.
- Interfaced with the Discipline Planning Teams to understand the construction schedule.
- Assessed the impact of inefficiencies on the successful completion of planned activities and adjusted the plan as required.
- Complied with the highest level of safety during all stages of project execution to avoid any type of accidents.
- Took reasonable care of own health and safety and that of others in the workplace.
- Complied with all statutory requirements connected with the implementation of the project.
- Determined the boiler strength (from the deformation calculations).
Experience
5-7 Years
Level
Executive
Education
Bachelor's degree in Mechanical Engineering
Hydro Test Engineer Resume
Objective : As a Hydro Test Engineer, carried out both positive and negative tests, understood the boiler specifications and plant capacity requirements, prepared software prototypes and hardware modules for testing, and prepared an Excel sheet of tests conducted failures, passed tests, and changes made.
Skills : Analytical, problem-solving, Communication, and interpersonal skills.
Description :
- Procured all the inventory and materials required for the execution of the project.
- Executed the project with available manpower and resources within the stipulated time.
- Interacted with the client regarding the progress of the project.
- Prepared & submitted filled hydro test reports to the client.
- Expertised in Waste Heat Boiler and Thermic Fluid Boiler hydrostatic testing.
- Studied the P&ID diagrams of the platform and Process stations for Commissioning.
- Prepared AutoCAD Drawings of Pigging and Hydro Testing.
Experience
2-5 Years
Level
Executive
Education
Bachelor's degree in Mechanical Engineering
Hydro Test Engineer Resume
Objective : As a Hydro Test Engineer, Took a proactive approach by providing workable solutions to reduce the company costs without compromising production targets or asset integrity. Managed large plant shutdowns and was fully aware of the requirements of work preparation, scheduling, and execution. Ensured adequate procedures were in place for hydrostatic testing and flange makeup/torquing procedures.
Skills : Knowledge of mechanical engineering principles and practices.
Description :
- Decided the testing method to be used.
- Gave presentations to the Senior Hydro Test Engineer about the improvements and changes made in the prototype, and got approval for the same.
- Prepared 3D software models of the test setup, and sent it for approval from the manufacturing team and Executive Engineer Testing.
- Worked with the teams to determine the MAOP (Maximum Operating Pressure) and Specified Minimum Yield (SMYS).
- Managed/coordinated all hydro test activities in a safe manner, within budget, on time, and in accordance with applicable company procedures and technical/manufacturer specifications.
- Managed all hydro test activities in accordance with the agreed code of practice and procedures; CONTRACTOR and clients, ensuring technical integrity and HSE targets were met in a professional and cost-effective manner.
- Maintained records and delivered timely and accurate updates.
Experience
2-5 Years
Level
Junior
Education
Bachelor's degree in Mechanical Engineering
Hydro Test Engineer Resume
Objective : As a Hydro Test Engineer, Ensured after-service completion reports were updated in SAP for recharge to client (Service entries by planner & QS). Supported and delivered any new corporate initiative in line with CONTRACTOR and client.
Skills : Attention to detail, Familiarity with testing equipment and methods;Understanding of industry regulations and standards.
Description :
- Attended regular safety, health, and environmental awareness training provided by the company which will help meet the above requirements.
- Complied with all relevant procedures, and guidance, relating to the work, which will ensure compliance with the CONTRACTOR safety management system.
- Managed/coordinated hydro test activities in the operational area to ensure that all works were completed according to applicable procedures and standards of workmanship.
- Experienced in managing HSE site activities.
- Worked with crews in the preparation and carrying out of hydroâ€testing, pipe cleaning, and blowing works for gas pipelines, including review of drawing, prefab, pipe erection, and other activities required to complete the assigned scope of works.
- Contributed to the support and development of a competent and highly motivated staff with an emphasis on Omanisation.
- Commissioned (cleaning, Gauging, Hydro testing) and pre-commissioned (Swabbing, Drying, Nitrogen Purging) of the offshore and onshore pipeline Project works.
Experience
2-5 Years
Level
Fresher
Education
Bachelor's degree in Mechanical Engineering
Hydro Test Engineer Resume
Objective : As a Hydro Test Engineer, responsible for getting specifications from the customers, getting approval from the Executive Engineer, setting up teams for module and prototype testing, and setting the MAOP (Maximum Operating Pressure) with respect to the threshold.
Skills : Analytical, problem-solving, Communication, interpersonal.
Description :
- Generally preferred one to two-page resume (never make it appear like a booklet, even would refrain from reading such a resume!) Put extra effort into preparing separate resumes for employers demanding different eligibility criteria and requirements; both soft copy and hard copy.
- Adherenced to CONTRACTOR and project-specific health, safety, and environmental plans and procedures.
- Experienced in oil and gas or petrochemical company.
- Prepared all the reports, and test packs are a must.
- Handled equipment such as high-pressure pumps, line pipes, & specialized types of equipment in oil &gas installations.
- Responsible for Working with a construction company is a must.
- Coordinated inspection needs with operational functions to meet downtime requirements.
Experience
2-5 Years
Level
Executive
Education
Bachelor's degree in Mechanical Engineering
Hydro Test Engineer Resume
Objective : As a Hydro Test Engineer, managed construction activities for the site portfolio of projects. Kept updated on upcoming projects for construction determined site construction supervision resources and contractor resource availability and took action.
Skills : Testing Engineer, Understanding of industry regulations and standards.
Description :
- Field measured, fabricated, installed, and hydro-tested piping systems including offsets.
- Tested is done with water to check the pressure handling capacity of the vessels.
- Pressured might increase beyond the normal value, in such cases the vessels should be able to handle the pressure (till threshold value).
- Experienced in Hydro testing of cross-country pipelines.
- Performed leads or otherwise participated in the coordination of Construction work for onshore/offshore projects done by contractors to ensure conformance to the company’s specifications and standards.
- Ensured implementation of the company project procedures for the safe and efficient execution of construction projects.
- Coordinated with contractors onsite for the recording, tracking, and resolution of all project warranty items.
Experience
2-5 Years
Level
Executive
Education
Bachelor's degree in Mechanical Engineering
Hydro Test Engineer Resume
Summary : As a Hydro Test Engineer, I Assigned Engineers and participated in the review of Construction and Interface request documents (drawings, Method statements) for Company approval.
Skills : Analytical, problem-solving, Communication, and interpersonal, Knowledge of mechanical engineering principles and practices.
Description :
- Evaluated and developed solutions to problems on site, which arise in the execution of projects.
- Communicated effectively with the Project Manager and contractors.
- Maintained an established inspection strategy and plan.
- Managed site supervisors and verified that repairs, modifications, or renewals to equipment were carried out to the specified design and ensured that work had been completed in accordance with contractual terms and conditions 2/6.
- Liaised with the field in order to manage, monitor, evaluate, optimize, and troubleshoot production Operations.
- Participated in constructability reviews and contractors' engineering, construction, and pre-commissioning plan reviews.
- Supported Project Manager in facilities handover to operation preparation.
Experience
7-10 Years
Level
Management
Education
Bachelor's degree in Mechanical Engineering
Hydro Test Engineer Resume
Summary : As a Hydro Test Engineer, Ensured or arranged for review of documents and drawings as per Company project interface procedure for modifications, alterations, or installations to ensure conformance to the companys specifications and standards.
Skills : Interpersonal Skills and knowledge of mechanical engineering principles and practices.
Description :
- Effectively led and mentored staff. Maintained quality assurance and control of the works.
- Participated in the HAZARD review process as required and participated in the Risk assessment meetings for specific interface agreement requests that needed RA.
- Supported Company Safety, Environment and Quality policies and programs, and carried out specific duties and responsibilities related to his job as spelled out in management system documentation, policies, procedures, local documentation, Management System Manual, Safety Manual, and others.
- Coordinated the timely flow of information and activities between the Company and expansion projects.
- Coordinated all interface issues between the Company and others in the Ras Laffan area.
- Coordinated with Engineering, SEQ, and operations for any issue related to the interface.
- Evaluated and developed solutions to problems, which arise in the execution of projects with the Company Team (Engineering, SEQ, SIMOPS, Operations.
Experience
10+ Years
Level
Senior
Education
Bachelor's degree in Mechanical Engineering
